Introduction
Thank you for choosing the SAMOLLA FS1000-7000 series spinning fishing reel. This reel is designed for both saltwater and freshwater fishing, offering a smooth and reliable experience with its 6+1BB system and robust construction. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your new fishing reel to ensure optimal performance and longevity.

Figure 1: SAMOLLA FS1000-7000 Spinning Fishing Reel
Specifications
The SAMOLLA FS1000-7000 series offers various models with differing capacities and drag strengths. Key specifications are detailed below:
| Model | Gear Ratio | Ball Bearings | Max Drag (kg) | Weight (g) | Line Capacity (mm/m) |
|---|---|---|---|---|---|
| SA1000 | 5.2:1 | 6+1BB | 6KG | 189 | 0.15/180, 0.18/140, 0.20/120 |
| SA2000 | 5.2:1 | 6+1BB | 6KG | 190 | 0.18/360, 0.20/300, 0.25/190 |
| SA3000 | 5.2:1 | 6+1BB | 6KG | 195 | 0.20/340, 0.25/220, 0.30/150 |
| SA4000 | 5.2:1 | 6+1BB | 8KG | 229 | 0.20/240, 0.25/200, 0.37/100 |
| SA5000 | 5.2:1 | 6+1BB | 8KG | 237 | 0.35/180, 0.40/140, 0.45/110 |
| SA6000 | 5.2:1 | 6+1BB | 10KG | 288 | 0.30/250, 0.35/200, 0.40/110 |
| SA7000 | 5.2:1 | 6+1BB | 10KG | 295 | 0.35/220, 0.40/160, 0.45/130 |
Figure 2: Detailed Reel Parameters for SAMOLLA SA Series

Physical Dimensions
The reel dimensions vary by model series:
- SA1000-3000: Approximately 120mm (4.72in) height, 62mm (2.44in) width.
- SA4000/5000: Approximately 130mm (5.11in) height, 65mm (2.55in) width.
- SA6000/7000: Approximately 140mm (5.51in) height, 70mm (2.75in) width.

Figure 3: Reel Dimensions by Model Series
Key Features
- Aluminium Spool: Die-cast aluminum spool with large line capacity.
- Brass Bearing: Brass precision bearings for super hard gear, equipped for durability.
- Comfortable Handle: Left/Right inter-changeable handle for ambidextrous use and comfort.
- 6+1 BB: 6+1 stainless steel ball bearings for super smooth operation.
- Magnesium Alloy Main Gear: Lighter than ordinary aluminum alloys, improving smoothness.
- Oblique Angle Design: Reduces frictional resistance between fishing line and reel, improving casting distance.
- Bold Winding Ring: Smooth and flat surface greatly reduces line tangling.
- Unloading Adjustment: Delicate adjustment of unloading force for precise control.
- Large Diameter Relief Knob Puller: Increases static fishing force of the friction system by 30%.
- X-Ship: Mechanism for tighter winding of the line.
- ATD Drag: A new-generation drag system that continues to work smoothly following fish pulls.
- Precision Gear: Precision gear combination for smoother fishing vessel use.

Figure 4: Reel Component Highlights

Figure 5: Magnesium Alloy Main Gear

Figure 6: Oblique Angle Design

Figure 7: Unloading Adjustment and Bold Winding Ring

Figure 8: Large Diameter Relief Knob Puller
Setup
- Unpack the Reel: Carefully remove the reel from its packaging. Inspect for any visible damage.
- Attach Handle: The handle is ambidextrous and can be attached for left or right-hand retrieve. Screw the handle firmly into the desired side of the reel body.
- Spooling Line:
- Ensure the line is spooled evenly onto the aluminum spool.
- Avoid overfilling the spool, as this can lead to tangles and casting issues. Leave a small gap (approx. 1-2mm) from the spool lip.
- Use the "Bold Winding Ring" feature to help guide the line smoothly and reduce tangling during spooling and retrieval.
- Mounting to Rod: Securely attach the reel foot into the reel seat of your fishing rod. Tighten the reel seat to prevent any wobble during use.
Operating Instructions
- Drag Adjustment:
- The reel features an "Unloading Adjustment" system for precise drag control.
- Turn the drag knob on the front of the spool clockwise to increase drag tension and counter-clockwise to decrease it.
- Adjust the drag before fishing to match the breaking strength of your line and the target fish. A good starting point is to set the drag to about 25-30% of your line's breaking strength.
- The "Large Diameter Relief Knob Puller" enhances the static fishing force of the drag system, providing more control during fights.
- Casting:
- Open the bail arm.
- Hold the line against the rod with your index finger.
- Swing the rod forward, releasing the line with your finger at the appropriate moment.
- The "Oblique Angle Design" of the spool lip helps reduce friction and improve casting distance.
- Retrieving:
- Close the bail arm manually or by turning the handle.
- Crank the handle to retrieve the line. The "X-Ship" mechanism ensures tighter and more efficient winding.
- Maintain a steady retrieve speed.
- Fighting Fish:
- When a fish strikes, allow the "ATD Drag" system to work smoothly, providing consistent pressure while the fish pulls.
- Pump the rod up and reel down to gain line.
- Adjust drag as needed during the fight, but avoid sudden, drastic changes.
Maintenance
Regular maintenance will extend the life and performance of your SAMOLLA fishing reel.
- Rinse After Use: After each use, especially in saltwater, lightly rinse the reel with fresh water. Do NOT submerge the reel.
- Wipe Dry: Thoroughly wipe the reel dry with a soft cloth to prevent corrosion.
- Lubrication:
- Periodically apply a small amount of reel oil to moving parts such as the handle knob, bail arm pivot, and line roller.
- Apply reel grease to the main gear and other internal gears (if disassembling, refer to a professional or detailed reel maintenance guide). The Magnesium Alloy Main Gear benefits from proper lubrication for continued smoothness.
- Storage: Store your reel in a dry, cool place away from direct sunlight and extreme temperatures.
- Inspection: Regularly inspect the reel for any loose screws, worn parts, or damage. Address any issues promptly.
Troubleshooting
Most common issues can be resolved with basic checks:
- Line Tangles/Loops: Ensure the spool is not overfilled. Check for twists in the line. The Bold Winding Ring is designed to minimize tangles, but proper line management is still crucial.
- Stiff Handle/Grinding Noise: This often indicates a need for cleaning and lubrication. Disassemble carefully or seek professional service.
- Drag Slipping/Sticking: Check if the drag washers are dry or contaminated. Clean and re-grease drag washers with appropriate drag grease. Ensure the drag knob is tightened correctly.
- Bail Arm Not Closing: Inspect the bail spring and mechanism for obstructions or damage.
If you encounter persistent issues that cannot be resolved with these steps, please contact SAMOLLA customer support.
User Tips
- Match Reel to Rod: Ensure your SAMOLLA reel is balanced with your fishing rod for optimal casting and comfort.
- Line Selection: Choose a fishing line appropriate for your target species and fishing conditions. The reel's line capacity is listed in the specifications.
- Practice Drag Settings: Familiarize yourself with the drag system by testing it before fishing. This prevents line breakage and lost fish.
- Smooth Operation: The 6+1BB system provides a very smooth retrieve. Avoid forcing the reel if it feels stiff; investigate the cause.
- Saltwater Care: Even though it's designed for saltwater, always rinse thoroughly with fresh water after saltwater use to prevent corrosion.
Warranty and Support
For warranty information or technical support, please contact the SAMOLLA Official Store or your point of purchase. Keep your purchase receipt as proof of purchase.
Brand Name: SAMOLLA
Origin: Mainland China