BOBLOV M7 Pro

Contents

BOBLOV M7 Pro Body Camera User Manual

Model: M7 Pro

BOBLOV M7 Pro Body Camera front view

Front view of the BOBLOV M7 Pro Body Camera, highlighting its compact design and main lens.

1. Important Cautions

  • Always fully charge the battery before use. It is advised to charge for at least 4 hours.
  • Use the standard Type-C cable and 5Vdc, 2A charger plug to charge.
  • It is recommended to power off the camera manually for stable and quick charging.
  • Do not expose the camera or battery to high/low-temperature environments. If the battery leaks or bulges, stop using it. There is a risk of explosion if the battery is incorrectly placed.
  • Never replace the battery yourself. It may cause damage or an explosion. Please contact the seller if the battery has any problem.
  • Do not expose the LCD or lens to direct sunlight.
  • Never dismantle, crush, or pierce the product, or allow it to short-circuit. Seek professional assistance if the product does not work properly.
  • If the camera is not used for an extended period, charge it occasionally to prevent battery damage.
  • Maintenance: To clean the lens and both LCD screens, wipe with a soft, lint-free cloth. Do not insert foreign objects around the lens. Do not use liquids.

2. Product Overview

2.1 Structure Diagram

BOBLOV M7 Pro Body Camera structure diagram with numbered parts

Detailed diagram showing the various components and buttons of the BOBLOV M7 Pro Body Camera from multiple angles.

  1. Working Indicator Light ①
  2. Working Indicator Light ②
  3. Blue Flash Light
  4. Red Flash Light
  5. Four IR Lights
  6. Image Sensor
  7. White Light
  8. Microphone
  9. Speaker Output
  10. Big Front Video Button
  11. 180° Rotatable Lens
  12. Reset Button
  13. Menu / OK / Confirm Button
  14. Up Button / Video Lock / Rewind
  15. Down Button/Playback Button / Fast Forward
  16. Return Button
  17. Type-C Charging Port
  18. IR Active Button / White Light Active Button
  19. Power Button
  20. Photo Button / Red- Blue Alarm Active Button
  21. Video Button
  22. Audio Button

2.2 Button Operation Guide

ButtonFunction
Big Front Video ButtonLong press in power-off state to activate camera and start video recording. Short press in standby mode to start/stop video recording.
Menu Button / OK / Confirm ButtonShort press in standby to enter Menu settings. In playback list, confirm file and long press for delete option.
Up Button / Video Lock / RewindShort press in menu/playback mode for previous option/step. Short press during video playback to Rewind. Short press during recording to Lock/Mark current file.
Down Button / Playback Button / Fast ForwardShort press in standby to enter Playback Mode. Short press in menu/playback mode for next option/step. Short press during video playback to Fast Forward.
Return ButtonShort press in menu setting acts as a return key.
IR Active Button / White Light Active ButtonShort press in standby/video mode to turn White Light on/off. Long press in standby/video mode to turn IR Lights on/off.
Power ButtonLong press to Power On/Off the camera. Short press in standby to turn off the display.
Photo Button / Red-Blue Alarm Active ButtonShort press to take a photo. Long press to activate alarm sound and Red-Blue Flash Lights. Long press again to deactivate alarm sound, and a third long press to deactivate Red-Blue Flash Lights.
Video ButtonLong press in power-off state to activate camera and start video recording. Short press in standby mode to start/stop video recording.
Audio ButtonShort press in standby mode to start/stop audio recording.

3. Quick Setup

3.1 Charge the Camera

Please use the standard Type-C cable and 5Vdc, 2A charger plug to charge the camera. With fast chargers, the M7 Pro body camera will take 4 hours to fully charge.

Note: Once connected to the power socket, the camera will boot automatically. Please manually power it off for charging.

BOBLOV M7 Pro Body Camera charging via USB-C

The camera connected to a USB-C cable for charging, indicating a built-in 4000mAh battery and charging time of 4 hours for 15 hours of recording.

3.2 Power On/Off / Standby Mode

3.2.1 Power On/Off: Long press the power button to boot. Long press this button again to power off the device.

3.2.2 Standby Mode/Screen Save: In the power-on state, Working Indicator Light ① stays green. In standby mode, short press the Menu/OK button to enter the settings menu. If the "Screen Saver" option is enabled (1min/3min/5min), the screen will turn off after no operation. Tap any button to light up the display screen/activate the camera.

3.3 180° Rotatable Lens Guide

The M7 Pro camera lens supports 180 degrees of manual rotation. With the rotation in camera standby or video mode, the screen's real-time image will automatically adjust to the correct direction.

BOBLOV M7 Pro Body Camera with 180 degree rotatable lens

Illustrations showing the 180° rotatable lens of the M7 Pro, allowing for flexible and auto-upside-down filming.

Note: The lens only supports 180 degrees of rotation. Please DO NOT rotate it more than 180 degrees, otherwise, the lens and internal cables may be broken.

4. Operating Instructions

4.1 Video Recording

4.1.1 Normal Video Recording: In standby, short press the Video button to record video. During recording, a red video icon and Working Indicator Light ② will flash red. Press again to stop recording and save. Video files are named by date and time, saved in MP4 format.

4.1.2 One Key to Video Recording: The camera supports one-key video recording. In power-off state, long pressing the Video button will activate the camera and start video recording.

4.1.3 Video Locked: During video recording, short press the Up button to mark/lock videos. A lock mark will appear on the top middle of the screen. Short press the Up button again to release/cancel the lock. Then press the Video button to save the video file.

Official product video demonstrating the BOBLOV M7 Pro Body Camera's features, including 4K video recording, 180° rotatable lens, and GPS functionality.

4.2 Taking Photos

4.2.1 Single Shot: In standby mode, short press the Photo button once. Working Indicator Light ① flashes green once, and one photo is taken. Photo files are named by date and time, saved in JPG format.

4.2.2 Photo Burst Mode: If "Continuous Shooting" is set to "3P/5P/10P" in the menu, short press the Photo button once. Working indicator light flashes green once, and several photos are taken at one press.

4.2.3 Snapshot: During video recording, short press the Photo button to take a snapshot. Each press will take one photo.

4.3 Audio Recording

This model can record separate audio files. In standby, short press the Audio button to record audio. When recording, the screen displays a microphone logo and recording details, and Working Indicator Light ② flashes yellow. Press again to stop recording and save. Audio files are named by date and time, saved in WAV format.

4.4 Night Vision

The infrared night vision is set to "Manual" by default. Long press the IR Active button to turn night vision on/off in standby or video mode. To activate automatic night vision, go to menu settings and set "Infrared Switch" to "Auto". The camera will then switch to night vision mode based on ambient brightness.

BOBLOV M7 Pro Body Camera night vision in action

The camera displaying clear images at night using its manual/auto IR night vision feature.

4.5 Playback Files on Camera

After recording, you can enter the Playback Files Page to review them. In standby mode, short press the Playback button to enter the playback page, where you can manage files. Short press the Up/Down/OK buttons to select a file and confirm to play. Short press the Return button to go back or exit the Playback Files Page.

Video File List
Video file list on camera screen

Screenshot of the camera's display showing a list of recorded video files.

Photo File List
Photo file list on camera screen

Screenshot of the camera's display showing a list of captured photo files.

Audio File List

The camera's display showing a list of recorded audio files.

4.6 File Deletion

Enter the Recorded Files Page to delete unwanted files. In the file list, short press the Up/Down/OK button to select the file, then long press the Menu/OK button to get the delete option. Short press Up/Down/OK to select an option and confirm.

Note: Locked/marked videos cannot be deleted on the camera itself.

4.7 Connecting to Computer

Connect the camera to the computer using the provided USB cable. The camera will enter USB disk mode, displaying "Mass Storage". In this state, the camera cannot record videos or perform other operations. A new removable disk for the camera will appear on your computer.

If "Password Protect" is enabled, you must input the password (default is 000000) to review or delete files on the computer.

4.8 Resetting the Camera

If the camera locks up or stops working, you can reset it by poking the reset button with a pin or thimble. The camera will automatically shut down after the reset. Long press the Power button to turn it back on.

BOBLOV M7 Pro Body Camera reset button location

Image indicating the location of the reset button on the BOBLOV M7 Pro Body Camera.

4.9 GPS Function

If the "GPS" option is enabled during video recording, route information will be collected. This data can be played back with the video using the provided GPS player.

To enable GPS: In standby mode, click the Menu/OK button to enter the menu. Use the Up/Down buttons to navigate to "GPS" option. Click Menu/OK again, then use Up/Down to choose "On" and click Menu/OK to save.

A white GPS icon will appear on the top right corner of the screen. Go to an open area for the GPS to successfully locate. The white GPS icon will turn green once located. Take a video, and GPS data will be collected.

BOBLOV M7 Pro Body Camera GPS function enabled

The camera's screen showing GPS function enabled, with a map and route tracking on a connected PC.

Note: When the GPS number is 0, it means no signal is acquired. When the number is 1 or above, signal is acquired. For accurate GPS data, place the camera in an open area. GPS signal may be weakened in viaducts, tunnels, or with metal shielding.

4.9.1 Playback GPS Videos on Computer

The GPS player only supports Windows computers. Download the GPS player provided by the manufacturer to playback videos with track information.

Method 1: Search boblov.com and download the "M7/M7 Pro GPS Player Download-GXPlayer" software.

Method 2: Connect the camera to the computer. In the camera's U disk, find "Player_download.txt" and copy the link to download the GXPlayer compressed file.

Note: If alerted about a virus, disregard it. This is a common alert for unfamiliar files and the file is safe.

Steps: 1. After downloading, unzip the GPS Player compressed file into a new folder. 2. Double-click the file named "sunning" to open the player.

4.9.2 GPS Player Interface Introduction

The GPS player interface allows you to control video playback and view GPS data.

  1. To play previous video
  2. Pause the video
  3. To play next video
  4. Stop Playing Button
  5. Click to choose the video file on your computer to playback
  6. Screenshot
  7. Image Rotation
  8. File List (double click to replay)
  9. Compass
  10. Moving Speed
4.9.3 GPS Player Setting Page

Click the setting icon in the top right corner to set the language and choose the Google Map for video playback. When playing, stop playback first before changing the map.

4.10 Car Mode (Car Suction Set Not Included)

Car Mode means the camera will automatically start recording when connected to the vehicle's 12Vdc power port using a 12Vdc port charger and the engine starts.

To use as a dash cam, in standby mode, enter the setting menu and set "Car Mode" to "On".

Note: The Car Suction Set is not included in the standard package and must be purchased separately.

Install the Car Suction Bracket and Camera

You need to buy the M7 Pro Suction Dash Camera Mount and a Car Charger separately. Install the body camera on the car windshield. This suction mount only supports clean and smooth glass material. If the surface is not smooth enough or frosted glass, it may not suck firmly.

BOBLOV M7 Pro Body Camera car mode installation

Images illustrating the installation of the BOBLOV M7 Pro Body Camera with a car suction mount for use as a dash camera.

4.11 Time & Date Setting

There are two ways to set time and date:

Manually Setting (when GPS option is Off): Enter Menu and find "Date/Time" to set a local one and save.

Sync Auto (when GPS option is ON):

  1. Enter Menu, find "Time Zone", set it to your local time zone (e.g., GMT-08 for US), and save.
  2. Turn on the "GPS" option in the menu. Once the camera GPS is successfully located (white GPS icon turns green), the camera date & time will sync to the local correct time.

4.12 Loop Recording

If "Loop Recording" is enabled (default On), when storage is full, the device will overwrite old files. (Note: This does not overwrite marked/locked videos.) Video recording is saved as clips/fragments to prevent large files from being damaged. "Video Duration" can be set to 5mins, 10mins (default), or 15mins.

4.13 Camera Password

The "Password Protect" option is in the menu settings. To turn it on, you need to insert the default password (000000) first, then select "On" and confirm.

If you forget the password, email support@boblov.com for help.

After turning on "Password Protect", you need to verify the password when:

  1. Connecting the camera to the computer.
  2. Entering the menu page.
  3. Trying to enter the Playback Files Page.
  4. Changing the camera password (verify old password first).

4.14 Rewind / Fast Forward

When playing back video files, short press the Up button to rewind and the Down button to fast forward. Short press the Up or Down button once to increase speed by two times. Fast forward and rewind can be adjusted in the range of 2X-8X.

5. Camera Indicator Lights

StateWorking Indicator Light ①Working Indicator Light ②
ChargingSolid Blue (When powering on for charging, this will be solid green and blue.)/
Fully ChargedBlue light Off (When powering on for charging, this will be solid green.)/
Power On/StandbySolid Green/
Connecting to ComputerSolid Green and Blue/
Video Recording/Red Light Flash
Take PhotosEvery press will flash green once/
Audio Recording/Yellow Light Flash

6. White Light / Red-Blue Alarm

6.1 White Light

After powering on, a short press of the IR Active button will turn the White Light on/off.

6.2 Red-Blue Alarm

In standby, long press the Photo button to activate the alarm sound and Red-Blue Flash Lights. Long press the button again to deactivate the alarm sound, and a third long press will deactivate the Red-Blue Flash Lights.

Note: If the Silent Mode option is On in the menu, the camera cannot activate the Red-Blue Alarm feature. Silent Mode disables the camera beep sound and indicator light.

7. Menu Introduction

To navigate the menu:

  1. Short press the Menu/OK button to enter the menu page.
  2. Short press the Up/Down/OK buttons to select an option and confirm.
  3. Short press the Return button to exit the menu page.
DescriptionOptions
Video Resolution3840x2160P30, 2560x1440P30, 2304x1296P30, 1920×1080P30 (default), 1280×720P
Image SizeVGA, 3MP, 5MP, 8MP, 10MP, 12MP, 16MP, 21MP, 32MP (default), 40MP
Video CodingH264 (default), H265. Note: H265 files may not open with default Windows player; use VLC or Quick Time Player.
QualityFine, Normal, Economy
Video PrerecordOff (default), On. Merges the first 10 seconds of recording into the recorded video.
Post-RecordOff (default), 30sec, 1 min. Sets a countdown for saving video after stopping recording.
Continuous ShootingOff (default), 3P, 5P, 10P. Captures multiple photos in 1 second.
GPSOff (default), On. Collects routes/GPS info for videos.
Time ZoneGMT-8 (default). Set to local time zone for correct time sync with GPS.
Loop RecordingOn (default), Off. Overwrites old files when storage is full (except marked/locked videos).
Video Duration5mins, 10mins (default), 15mins. Sets length of video clips.
Record AudioOn (default), Off. If off, recorded video will have no audio.
Date StampOn (default), Off. Adds date/time watermark to video files.
Car ModeOff (default), On. Auto-records when placed in power/vehicle engine start mode.
Auto Power OffOff, 1mins, 3min, 5min, 10min (default). Camera automatically shuts off after inactivity.
Beep SoundOn (default), Off. Controls button sound and power on/off sound.
LanguageEnglish (default), 简体中文, 繁体中文. Sets camera text display language.
Infrared SwitchManual (default), Auto. Night Vision mode turns to black-white.
Screen SaverOff, 1mins, 3min, 5min (default). LCD screen auto-off after inactivity.
Silent ModeOff (default), On. Enables hidden recording without indicator or sound prompt.
Voice PromptsOff (default), On. Voice prompts for start/stop video/audio recording. Note: No voice prompts if Beep Sound is Off or Silent Mode is On.
Anti-VirusOff (default), On. Prevents virus from invading camera when connected to computer.
PasswordDefault password: 000000. Verify and change to a new password.
Password ProtectOff (default), On. Requires password to access settings, playback files, and computer connection.
Police ID6 digits. Edit police numbers.
Device ID7 digits. Edit device numbers.
VolumeLow, Medium, High (default). Adjusts button sound volume.
Date/TimeCan be edited. Set to your local date and time.
Format/ . Formats the SD card, deleting all files.
Default Setting/ . Restores default values after password verification. All settings reset to factory default.
Firmware Version/ . Displays camera firmware version.

8. Specifications

FeatureSpecification
Image Sensor2MP CMOS
ChipsetGeneralplus
Display2.0"; IPS high resolution 320*240 color display
Video Resolution3840x2160P30, 2560x1440P30, 2304x1296P30, 1920×1080P30 (default), 1280×720P
Video FormatMP4
Photo SizeVGA, 3MP, 5MP, 8MP, 10MP, 12MP, 16MP, 21MP, 32MP (default), 40MP
Photo File TypeJPG
Wide Angle127°
Night VisionSupported; 4 infrared lights
Power Supply5Vdc/2A
Battery TypeBuilt-in rechargeable 3.8V 4000mAh lithium battery
Use Time15 Hours of video recording (1080P, Screen&GPS Off)
Charging Time4 Hours to fully charged using the provided fast charger
Memory CapacityInternal 64GB, 128GB optional
Voice promptsON/Off Optional
Screen SaverOff, 1mins, 3min, 5min (default)
Auto Power OffOff, 1mins, 3min, 5min, 10min (default)
USB Port TypeType-C Charging Port
Password ProtectionSupport
Working TemperatureRecommend: -5℃ ~ +45℃ (23~+113°F)
Storage TemperatureRecommend: -10~+50℃ (14~+122°F)
Waterproof LevelNot Applicable
Anti-fall Level2M
Size95*60*26mm, 3.7x2.4x1inch
Weight160g/5.6oz/0.35lb
Compatible SystemWindows XP/7/8 SP3/Vista and Mac 10.5 or above

9. Troubleshooting

Q: Why did the image direction not change to correct?
A: After rotating the camera lens, it may take 2-3 seconds for the camera to react and auto-upside-down the image to the correct direction.
Q: The camera doesn't power on or stops working.
A:
  1. Connect the charger and USB cable to charge the camera and check whether the problem is solved after 4 hours of charging.
  2. Please check whether the charger and the USB cable are operating correctly.
  3. Connect your device to the wall socket, then press the power button to check whether it could be powered on.
  4. Use a pin to do a reset of the camera and re-power on to check again.
  5. If the problem cannot be solved, please contact customer service for further help.
Q: Why does the camera stop recording? Can't record video anymore?
A:
  1. Make sure the camera storage capacity is large enough to record. Turn on "Loop Recording" to let the camera record continuously by covering the old files once the memory is full.
  2. Physical Double check: Check whether the Video Button is intact and could be pressed down normally.
  3. Format the camera and do a hard reset then record again.
  4. If the problem cannot be solved, please contact customer service for further help.
Q: A video or audio file cannot be played? Or no sound for videos?
A:
  1. Please check the menu and turn off the "Record Audio" option.
  2. It is recommended to play back videos/audio on the VLC media player on the computer.
Q: The camera display is showing red/green.
A:
  1. Please turn on and off the night vision through the IR Active button to check again.
  2. Please reset the camera and power it on to check.
Q: Why does the LCD screen turn off automatically?
A: The camera enters the "Screen Saver" mode by default without 5 minutes of operation. To keep the display on, enter the menu to set the "Screen Saver" option to Off. "Screen Saver" options are Off/1min/3min/5min.
Q: Why does the camera shut off automatically?
A: Check if the "Auto Power Off" option in the menu is On. To keep the camera powered on, set "Auto Power Off" to Off. "Auto Power Off" options are Off/1 Minute/3 Minutes/5 Minutes/10min (default).
Q: I use a MacBook, can I use the GPS player?
A: The GPS player for the M7 Pro body camera is only suitable for Windows computers.
Q: Why can't the 4K video be opened on the computer?
A: 4K video uses the H265 codec. Default Windows media players may not open H265 files. It is recommended to use VLC media player to open 4K videos.
Q: I forgot my password, how to reset it?
A: Contact customer support at support@boblov.com for assistance with resetting your camera password.
Q: I lost the clips, can I get the replacement part?
A: For spare accessories or replacement parts, email after-sale service at support@boblov.com.

10. User Tips

  • For the best video and audio quality, ensure your camera settings are optimized for your environment.
  • When downloading the GPS player, if your computer flags it as a potential virus, rest assured it's a false positive due to an unfamiliar file; the player is safe to use.
  • To ensure accurate GPS data collection, operate the camera in open areas. Signal strength can be compromised in tunnels, viaducts, or when metal shielding is present.
  • To maintain battery health, periodically charge your camera even when not in regular use.
  • The GPS player software is designed for Windows operating systems only.
  • If you encounter issues playing 4K videos (H265 codec) on your computer, we recommend using VLC Media Player for seamless playback.

11. Package Contents

BOBLOV M7 Pro Body Camera packaging list

Image showing all items included in the BOBLOV M7 Pro Body Camera package.

  • 1x M7 Pro Body Camera
  • 1x USB-C Cable
  • 1x Fast Charger Plug
  • 1x Short 360° Rotatable Back Clip
  • 1x Long 360° Rotatable Shoulder Clip
  • 1x User Manual
  • Optional accessories (e.g., Suction Dash Camera Mount, Car Charger) are not included and must be purchased separately.

Please note: Accessories may be updated without prior notice. Please refer to the actual receipt of the items.

12. Customer Support

BOBLOV is dedicated to offering the best service to our valuable customers.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.