Jonsbo ZA-120/240/360 Series

Contents

Jonsbo ZA-120/240/360 Series ARGB PWM Cooling Fan Instruction Manual

Model: ZA-120, ZA-240, ZA-360 Series

Introduction

Thank you for choosing the Jonsbo ZA-120/240/360 Series ARGB PWM Cooling Fan. This product is designed to provide efficient cooling for your PC case or radiator while offering stunning customizable ARGB lighting effects. This manual will guide you through the installation, operation, maintenance, and troubleshooting of your new fan.

Key Features

  • Multi-Sided Thousand Layer Mirror Light Effect: Unique visual design for enhanced aesthetics.
  • Addressable RGB (ARGB) Lighting: Synchronize custom lighting effects with your motherboard (requires 3-pin 5V ARGB header).
  • PWM Control: Dynamic fan speed adjustment (700-2400 RPM) for optimal balance between cooling performance and noise.
  • Hydraulic Bearings: Ensures long life and quiet operation.
  • Aluminum CD Pattern Nameplate: Premium finish and design.
  • Easy Installation: Simplified wiring and mounting with 9 cooling blades.
Jonsbo ZA series fans with ARGB lighting, showing single, dual, and triple fan configurations.
Jonsbo ZA-120, ZA-240, and ZA-360 series fans showcasing their ARGB lighting.
Diagram highlighting key features of the Jonsbo ZA-360/240/120 ARGB Infinity Mirror Series, including four-sided mirror light effect, easy installation, one-line connection, and aluminum CD pattern nameplate.
Overview of the ZA series' design and connectivity features.

Specifications

The Jonsbo ZA series fans come in various configurations. Please refer to the table below for detailed specifications.

ParameterZA-120B (Forward)ZA-120BR (Reverse)ZA-240B (Forward)ZA-240BR (Reverse)ZA-360B (Forward)ZA-360BR (Reverse)
Fan Size (L*W*H)120*120*28mm120*120*28mm242*123*28mm242*123*28mm362*123*28mm362*123*28mm
Fan Speed700-2400 (±10%) RPM700-1800 (±10%) RPM700-2400 (±10%) RPM700-1800 (±10%) RPM700-2400 (±10%) RPM700-1800 (±10%) RPM
Air Volume21.46-62.40 CFM19.46-44.58 CFM21.46-62.40 CFM19.46-44.58 CFM21.46-62.40 CFM19.46-44.58 CFM
Wind Pressure0.49-2.46 mmH2O0.29-1.71 mmH2O0.49-2.46 mmH2O0.29-1.71 mmH2O0.49-2.46 mmH2O0.29-1.71 mmH2O
Noise21.3-37.3 dB(A)17.3-31.6 dB(A)21.3-37.3 dB(A)17.3-31.6 dB(A)21.3-37.3 dB(A)17.3-31.6 dB(A)
Rated Voltage (FAN)DC12VDC12VDC12VDC12VDC12VDC12V
Rated Voltage (LED)5V5V5V5V5V5V
Rated Current (FAN)0.22A0.13A0.43A0.25A0.61A0.35A
Rated Current (LED)0.71A0.71A1.16A1.16A1.35A1.35A
Power (FAN)2.64W1.56W5.16W3.00W7.32W4.20W
Power (LED)3.55W3.55W5.80W5.80W6.75W6.75W
Fan BearingsHydraulic Bearings
Life (MTTF)≥ 20000h (Room Temp: 25 ℃)
InterfacePWM 4PIN (Fan Power), ARGB 3PIN (LED Control)
Number of LED beads32 (around) + 9 (parallel axis)52 (around) + 18 (parallel axis)68 (around) + 27 (parallel axis)
Detailed specification table for Jonsbo ZA-120 and ZA-240 series fans, including fan size, speed, airflow, noise, voltage, current, power, bearings, life, and interface.
Specifications for ZA-120 and ZA-240 models.
Detailed specification table for Jonsbo ZA-360 series fans, including fan size, speed, airflow, noise, voltage, current, power, bearings, life, and interface.
Specifications for ZA-360 models.

Installation Guide

  1. Prepare your PC Case: Ensure your PC case has appropriate mounting points for 120mm, 240mm, or 360mm fans/radiators.
  2. Mount the Fan(s):
    • Position the fan(s) in the desired location (e.g., case front, top, rear, or on a radiator).
    • Secure the fan(s) using the provided screws. The integrated fan grille lighting effect ensures a clean look regardless of installation orientation.
  3. Connect Fan Power (PWM):
    • Locate an available 4-pin PWM fan header on your motherboard.
    • Connect the fan's 4-pin PWM cable to the motherboard header. This allows for dynamic speed control.
  4. Connect ARGB Lighting:
    • Locate an available 3-pin 5V ARGB header on your motherboard or a compatible ARGB controller.
    • Connect the fan's 3-pin ARGB cable to the motherboard/controller header.
    • Important: Ensure your motherboard or controller supports the required number of LED chips (e.g., 68+27 for ZA-360, 52+18 for ZA-240, 32+9 for ZA-120). Connecting to an incompatible header (e.g., 12V RGB) can damage the LEDs.
    • The "one line connection to motherboard" design simplifies wiring and cable management.
  5. Cable Management: Route cables neatly to ensure proper airflow and a clean build.
Diagram showing simplified wiring for the Jonsbo ZA series fans, connecting a single line to the motherboard for both power and ARGB control.
Simplified wiring for seamless connectivity.
Close-up image of a Jonsbo ZA series fan installed in a PC case, highlighting the integrated fan grille lighting effect and secure screw mounting.
Integrated fan grille lighting effect and fixed with 4 screws for easy installation.
Diagram illustrating the air outlet and inlet surfaces for both forward and reverse nine-blade cooling fans, showing airflow direction.
Airflow direction for forward and reverse fan blades.

Operation

Fan Speed Control (PWM)

The fan speed is controlled via the 4-pin PWM connection to your motherboard. You can adjust fan curves and speeds through your motherboard's BIOS/UEFI settings or dedicated software provided by your motherboard manufacturer. This allows you to optimize for cooling performance or quiet operation.

Chart showing noise levels, RPM speed, and airflow for both forward and reverse fan blades, indicating quiet operation and balanced performance.
Noise, RPM, and Airflow characteristics for forward and reverse fan blades.

ARGB Lighting Control

The ARGB lighting effects can be controlled through your motherboard's ARGB synchronization software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync) or a dedicated ARGB controller. Ensure your software is up-to-date for the best experience.

  • Synchronous Light Effect: The fans support colorful synchronous light effects, allowing you to customize and match them with other ARGB components in your system.
  • Connection Requirement: A 3-pin 5V optical control interface is required for ARGB functionality.
  • Daisy Chain: The 5V ARGB plug features male and female designs, allowing multiple fans or other ARGB devices to be connected in series.
Image showing the ARGB colorful synchronous light effect and emphasizing the need to connect to a motherboard or controller with a 3-pin 5V optical control interface.
ARGB lighting synchronization and connection details.
Screenshot of a motherboard's ARGB software interface (likely ASUS Aura Sync) demonstrating how to customize lighting effects, with text describing live streaming motherboard with 3PIN ARGB pins, synchronized with over 16 million color effects, and 5V ARGB plug male and female design for daisy-chaining.
Guide to using illusionary light effects via motherboard software.

Maintenance

To ensure optimal performance and longevity of your Jonsbo ZA series fans, follow these simple maintenance guidelines:

  • Regular Cleaning: Periodically clean dust from the fan blades and frame using compressed air or a soft brush. Ensure the PC is powered off before cleaning.
  • Inspect Cables: Check fan and ARGB cables for any signs of wear or damage. Ensure they are securely connected.
  • Bearing Longevity: The fans utilize hydraulic bearings, which are designed for long life (MTTF ≥ 20000 hours) and generally require no lubrication.

Troubleshooting

Fan Not Spinning

  • Check Power Connection: Ensure the 4-pin PWM cable is securely connected to the motherboard's fan header.
  • BIOS Settings: Verify that the fan header is enabled in your motherboard's BIOS/UEFI settings and that the fan speed curve is configured correctly.
  • Power Supply: Confirm that your power supply is providing adequate power to the motherboard and fan headers.

ARGB Lighting Not Working or Incorrect

  • Check ARGB Connection: Ensure the 3-pin 5V ARGB cable is securely connected to the correct 5V ARGB header on your motherboard or controller. Do NOT connect to a 12V RGB header.
  • Motherboard/Controller Compatibility: Verify that your motherboard or ARGB controller supports the required number of LED chips (e.g., 68+27 for ZA-360). Some motherboards allow adjusting the number of LED chips in their software.
  • Software Configuration: Open your motherboard's ARGB software (e.g., Aura Sync, Mystic Light) and ensure the ARGB header is enabled and configured for the connected fans. Try different lighting modes.
  • Daisy Chain Check: If multiple fans are daisy-chained, ensure all connections are secure and in the correct orientation.

Excessive Noise

  • Mounting: Ensure the fan is securely mounted and not vibrating against the case or other components.
  • Obstructions: Check for any cables or objects obstructing the fan blades.
  • Fan Speed: Adjust the fan speed in your motherboard's BIOS/UEFI or software to a lower RPM if noise is a concern and cooling performance is sufficient.
  • Dust Buildup: Clean the fan blades as described in the Maintenance section.

Warranty and Support

For warranty information, please refer to the terms and conditions provided by your retailer or the official Jonsbo website. Keep your proof of purchase for warranty claims.

For technical support or further assistance, please contact the seller, PC BESTS Store, or Jonsbo customer service.

  • Seller: PC BESTS Store
  • Contact: Refer to your purchase platform for seller contact details.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.