1. Introduction
The HTOOL HT8 is a passive log periodic antenna designed for a wide frequency range of 0.1-12GHz. It offers directional reception and transmission, high gain, and is suitable for various applications including spectrum analysis, radio signal transmission/reception, EMI testing, and electromagnetic environment assessment. Its handheld design ensures portability and ease of use.
2. Functions & Features
- Direction Measuring Function: Able to realize the measurement of the directional and angular information of the signal, which can be used to determine the direction of the source of the signal.
- Directional Reception and Transmission: Designed to be more directional, focusing on receiving and transmitting signals to improve signal quality and coverage.
- High Gain: Enhances the reception sensitivity and transmission power of the signal, improving communication quality with a gain of 7-12dBi.
- Multi-frequency Band Support: Covers a wide bandwidth range of 0.1-12GHz, adapting to signal measurement needs across different frequency bands.
- Passive Design: Does not require external power supply, making it easy to install and use.
- Convenient to Carry: Compact and lightweight handheld design for portability.
- Simplifies System Complexity: Can reduce the number of components and complexity in a system, potentially lowering system costs.
3. Applications
- EMC Testing
- Spectrum Analyzers/Receivers
- Radio Signal Transmission/Reception
- Electromagnetic Environment Assessment
4. Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 100MHz - 12GHz |
| Polarization | Horizontal / Vertical |
| Directional Gain | 7-12dBi |
| Voltage VSWR | ≤2 |
| Antenna Size | 40.5 x 25.5 cm (15.94 x 10.04 inches) |
| Weight | 205g |
| Output Connector | SMA Male |
| Output Impedance | 50Ω |
The antenna dimensions are approximately 405mm in length and 255mm in width.

Image: Dimensions of the HTOOL HT8 antenna.
5. Package Contents
- HT8 Log Periodic Antenna x 1
- SMA cable x 1
Note: Spectrum Analyzer is not included.
6. Setup
- Unpack the HT8 Log Periodic Antenna and the included SMA cable.
- Locate the SMA male connector on the antenna.
- Carefully connect one end of the SMA cable to the SMA male connector on the antenna. Ensure a secure connection.
- Connect the other end of the SMA cable to your compatible spectrum analyzer (e.g., SA6 Analyzer).
- The antenna is designed for handheld use, providing flexibility during measurements.

Image: Detail of the SMA Male connector on the antenna.

Image: HT8 antenna with SMA cable connection.
Video: Demonstrates the assembly and handling of the HT8 antenna.
7. Operating Instructions
- Once the antenna is securely connected to your spectrum analyzer, power on the analyzer.
- Configure your spectrum analyzer settings according to the desired frequency range (0.1-12GHz) and measurement type (e.g., spectrum analysis, EMI testing). Refer to your analyzer's user manual for specific setup procedures.
- Hold the antenna by its handle, ensuring the directional end is pointed towards the area or source you wish to analyze.
- Slowly sweep the antenna across the target area to identify signal sources or measure signal strength from different directions.
- Observe the readings on your spectrum analyzer. The high gain of the HT8 antenna will help in detecting weaker signals.

Image: HT8 antenna in use with an SA6 Spectrum Analyzer.

Image: Example of a network analyzer display during measurements.
8. Maintenance
- Keep the antenna clean and dry. Use a soft, dry cloth to wipe off any dust or debris.
- Avoid exposing the antenna to extreme temperatures, direct sunlight for prolonged periods, or corrosive substances.
- Store the antenna in a safe place when not in use to prevent physical damage to the elements or connectors.
- Regularly inspect the SMA cable and connectors for any signs of wear or damage. Replace if necessary to ensure optimal performance.
9. Troubleshooting
- No Signal or Weak Signal:
- Ensure all SMA cable connections are secure and tight.
- Verify that your spectrum analyzer is powered on and correctly configured for the frequency range.
- Check for any physical obstructions between the antenna and the signal source.
- Try adjusting the antenna's direction and position.
- Inaccurate Readings:
- Ensure your spectrum analyzer is properly calibrated.
- Confirm that the selected frequency range on the analyzer matches your measurement requirements.
- Check for external interference that might be affecting readings.
- Physical Damage to Cable/Connector:
- If the SMA cable or connectors are visibly damaged, they may need to be replaced to restore proper functionality.
10. User Tips
- For optimal performance, ensure the SMA cable connections are always secure and free from kinks or damage.
- When performing directional measurements, slowly sweep the antenna across the area of interest to accurately pinpoint signal sources.
- Always refer to your spectrum analyzer's manual for detailed measurement procedures and calibration guidelines specific to your device.
- Consider using a tripod or stand for stationary measurements to maintain a consistent antenna position.
11. Environmental Requirements
- Working Temperature: -45℃ to +65℃
- High Temperature and Humidity: The equipment is designed to operate in environments where the temperature is not less than 40℃ and the relative humidity is not less than 95%.
12. Warranty and Support
For any technical support, warranty claims, or service inquiries regarding your HTOOL HT8 antenna, please contact the manufacturer or your point of purchase. Ensure you have your product model and any relevant purchase information available when seeking assistance.