1. Introduction
This manual provides detailed instructions for the installation and configuration of the EOENKK 16-pin Car Stereo Radio Power Wiring Harness with Canbus Box. This product is designed to facilitate the integration of an aftermarket 9-inch or 10.1-inch stereo head unit into compatible Nissan vehicles, ensuring the retention of essential factory features such as the BOSE amplifier, 7-inch screen, 360-degree camera, steering wheel controls, USB, and AUX inputs.
2. Compatibility
This wiring harness and Canbus box are compatible with the following Nissan vehicle models and years:
- Nissan X-trail Qashqai Rogue T32 (2014-2018)
- Nissan Teana 3 Altima 5 L33 (2013-2018)
- Nissan Sentra B17 (2012-2017)
- Nissan Murano (2015-2018)
- Nissan Navara Frontier NP300 (2014-2018)
- Nissan Juke Infiniti ESQ (2010-2014)
Important Notes:
- This harness is designed for universal 9-inch and 10.1-inch aftermarket stereos with a 16-pin power socket. It is not suitable for Pioneer, Sony, or Kenwood stereos.
- Not suitable for 2019+ Nissan cars equipped with a BOSE amplifier. For these models, a different harness (e.g., B0D31LPGPX) may be required.
- Always verify compatibility by checking the back connector picture of your original car radio against the provided reference images.
3. Package Contents
The package includes the following components:
- 16-pin Car Stereo Radio Power Wiring Harness
- Canbus Decoder Box (Model: NS-SS-04, DC: 20231229)

4. Setup and Installation
Installation of the wiring harness and Canbus box requires careful attention to connections. It is recommended that installation be performed by a qualified professional if you are not familiar with car audio wiring.
- Disconnect Battery: Before beginning any electrical work, disconnect the vehicle's negative battery terminal to prevent short circuits.
- Remove Existing Stereo: Carefully remove your vehicle's original car stereo unit. Refer to your vehicle's service manual for specific instructions on dashboard disassembly.
- Connect Wiring Harness: Connect the 16-pin power wiring harness to your new aftermarket stereo's 16-pin power socket.
- Connect Canbus Box: Locate the 8-pin CAN plug on the wiring harness and connect it to the corresponding 8-pin CAN socket on your aftermarket stereo head unit.
- Connect Vehicle-Specific Plugs: Connect the vehicle-specific connectors on the wiring harness to the corresponding ports in your car's dashboard wiring. Ensure all connections are secure.
- Reconnect Battery: Once all wiring connections are made and secured, reconnect the vehicle's negative battery terminal.
- Initial Power On: Turn on your vehicle's ignition and power on the aftermarket stereo. Proceed to the operating instructions for Canbus configuration.
5. Operating Instructions: Canbus Configuration
For the Canbus decoder to function correctly and enable features like steering wheel controls, 360 camera, and BOSE amplifier integration, it must be properly configured within your aftermarket stereo's settings. Follow these steps:
- Access Settings: On your aftermarket stereo, navigate to the main settings menu.
- Enter Factory Settings: Locate and enter the "Factory Settings" or "System Settings" menu. You may be prompted to enter a factory password. If you do not know this password, please contact the seller of your aftermarket stereo unit for assistance.
- Navigate to Canbus Settings: Within the factory settings, find "CANBUS Setting" or "Model Settings."
- Select Canbus Brand: Choose the correct CANBUS brand. This is typically labeled as "XP (simple or XINPU)".
- Select Car Brand and Model: Select "Nissan" as the car brand, then choose your specific car model (e.g., X-Trail, Qashqai, Teana, etc.).
- Select Configuration/Year: Choose the specific configuration or year that matches your vehicle.
- Save and Reboot: Save the settings and reboot your stereo unit. The Canbus features should now be active.
6. Maintenance
The wiring harness and Canbus box are designed for long-term reliability and require minimal maintenance. To ensure optimal performance:
- Regular Checks: Periodically check all connections to ensure they remain secure and free from corrosion.
- Cleanliness: Keep the area around the wiring and Canbus box free from dust and debris.
- Avoid Moisture: Ensure the components are not exposed to excessive moisture or extreme temperatures.
7. Troubleshooting
If you encounter issues after installation, consider the following troubleshooting steps:
- No Power to Stereo:
- Check all power connections from the harness to the stereo and the vehicle.
- Verify the vehicle's fuse for the stereo system.
- Steering Wheel Controls Not Working:
- Ensure the 8-pin CAN plug is securely connected to the stereo.
- Re-verify the Canbus configuration steps in Section 5, ensuring the correct brand, model, and year are selected.
- Confirm your aftermarket stereo supports steering wheel control integration via Canbus.
- No Sound or Poor Sound Quality (with BOSE amplifier):
- Confirm your vehicle is listed as compatible with the BOSE amplifier retention feature.
- Check all audio connections from the harness to the stereo and the amplifier.
- Ensure the Canbus configuration is correct, as it manages amplifier activation.
- Backup Camera / 360 Camera Not Displaying:
- Verify the camera input connections on the harness and stereo.
- Check Canbus settings for camera activation.
- Incompatible Stereo: This harness is specifically for universal 9'' and 10.1'' aftermarket stereos with a 16-pin power socket. It is not compatible with Pioneer, Sony, or Kenwood stereos.
- Incompatible Vehicle Year: This harness is not suitable for 2019+ Nissan cars with BOSE amplifiers.
- Unknown Factory Password: If prompted for a factory password during Canbus setup, contact your aftermarket stereo's seller for assistance.
8. Specifications
| Feature | Specification |
|---|---|
| Product Type | Car Stereo Radio Power Wiring Harness with Canbus Box |
| Brand Name | EOENKK |
| Origin | Mainland China |
| Connector Type | 16-pin |
| Canbus Box Model | NS-SS-04 |
| Supported Features | Factory BOSE amplifier, 7-inch screen, 360 Camera, Steering Wheel Control, USB, AUX |
| Color | Black (wiring harness) |
| Package Dimensions (approx.) | Length: 10cm, Width: 10cm, Height: 10cm |
| Package Weight (approx.) | 0.3 kg |
9. User Tips
- Always double-check your vehicle's exact model year and existing stereo system (e.g., presence of BOSE amplifier) against the compatibility list before purchase and installation.
- When configuring the Canbus settings, if the "XP (simple or XINPU)" option is not immediately visible, explore other "simple" or "universal" Canbus options within your stereo's factory settings.
- Take photos of your original wiring before disconnecting anything to aid in reassembly or troubleshooting.
10. Warranty and Support
For any questions regarding product functionality, installation, or troubleshooting that cannot be resolved using this manual, please contact the seller directly through the platform where the product was purchased. Provide your order number and a detailed description of the issue for prompt assistance.