Introduction
Thank you for choosing Joyroom Bluetooth Neckband Earphones. This manual provides essential information for setting up, operating, and maintaining your device. Please read it carefully before use to ensure optimal performance and longevity of your earphones.

Package Contents
Please check the package for the following items:
- Joyroom Bluetooth Neckband Earphones
- User Manual
- USB Type-C Charging Cable

Setup
1. Initial Charging
Before first use, fully charge your earphones. Connect the provided USB Type-C cable to the charging port on the neckband and the other end to a USB power source (e.g., computer, wall adapter). The indicator light will show charging status and turn off or change color when fully charged.
2. Power On/Off
- Power On: Press and hold the Multi-function button (usually the center button on the control panel) for a few seconds until you hear a power-on prompt and the indicator light flashes.
- Power Off: Press and hold the Multi-function button for a few seconds until you hear a power-off prompt and the indicator light turns off.
3. Bluetooth Pairing
- Ensure the earphones are powered off.
- Press and hold the Multi-function button for approximately 5-7 seconds until the indicator light flashes red and blue alternately, indicating pairing mode.
- On your device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
- Select "JR-D8" (or similar name) from the list of found devices.
- Once connected, the indicator light will typically flash blue slowly or turn solid blue, and you will hear a connection confirmation.
4. Dual Connection
The earphones support connecting to two Bluetooth devices simultaneously.
- Connect the earphones to the first device as described in "Bluetooth Pairing".
- Disable Bluetooth on the first device. The earphones will re-enter pairing mode.
- Connect the earphones to the second device.
- Re-enable Bluetooth on the first device. The earphones should automatically connect to both devices.

Operating Instructions
Controls (Refer to control panel image)

| Function | Action |
|---|---|
| Power On/Off | Press and hold Multi-function button |
| Play/Pause | Short press Multi-function button |
| Volume Up | Short press '+' button |
| Volume Down | Short press '-' button |
| Next Track | Long press '+' button |
| Previous Track | Long press '-' button |
| Answer/End Call | Short press Multi-function button |
| Reject Call | Long press Multi-function button |
| Activate Voice Assistant | Double-press Multi-function button |
Wearing the Earphones
The neckband design allows for comfortable wear around your neck. The earbuds feature a side in-ear fit for comfort. The magnetic design allows the earbuds to clasp together when not in use, preventing tangles and making them easy to carry.

Maintenance
- Cleaning: Use a soft, dry cloth to clean the earphones. Do not use harsh chemicals or abrasive materials.
- Storage: Store the earphones in a cool, dry place away from direct sunlight and extreme temperatures. When not in use, allow the magnetic earbuds to clasp together to prevent tangling.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the earphones regularly, even if not used for extended periods.
- Water Resistance: The earphones are IP54 waterproof, meaning they are protected against dust and splashing water. Do not submerge them in water or expose them to heavy rain.
Troubleshooting
| Problem | Solution |
|---|---|
| Earphones won't turn on | Ensure the battery is charged. Connect to a power source and try again. |
| Cannot pair with device |
|
| No sound or low volume |
|
| Intermittent connection |
|
| Call quality issues |
|
Specifications
| Feature | Specification |
|---|---|
| Brand Name | Joyroom |
| Model | JR-D8 (inferred) |
| Material | ABS |
| Weight | 20g |
| Battery Capacity | 170mAh |
| Bluetooth Version | Bluetooth 5.4 |
| Communication | Wireless |
| Charging Method | Cable (USB Type-C) |
| Impedance Range | up to 32 Ω |
| Frequency Response Range | 20-20000Hz |
| Resistance | 32Ω |
| Vocalism Principle | Dynamic |
| Waterproof Rating | IP54 |
| Microphone | Yes |
| Control Button | Yes |
| Volume Control | Yes |
| NFC Technology | No |
| Support APP | Yes |
| Certification | CE |
| Origin | Mainland China |

User Tips
To enhance your experience with the Joyroom Bluetooth Neckband Earphones:
- Optimal Fit: Experiment with different ear tip sizes (if included, though not explicitly listed in package contents, it's a common accessory) to find the most comfortable and secure fit for better sound isolation and bass response.
- Magnetic Convenience: Utilize the magnetic clasp feature to keep the earbuds secure around your neck when not actively listening, preventing them from falling or getting lost.
- Dual Device Management: When switching between two connected devices, pause audio on the first device before starting playback on the second to ensure seamless transition.
- Call Clarity: For the best call quality, ensure the microphone is not covered and try to be in a relatively quiet environment, leveraging the AI Call Enhancement feature.
- Gaming Experience: For gaming, ensure your device's Bluetooth settings are optimized for low latency, taking advantage of the 65ms low latency technology for synchronized audio and visuals.
Warranty and Support
Joyroom products are manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please refer to the contact details provided on the product packaging or the official Joyroom website. Keep your purchase receipt as proof of purchase.