Tuya QS-S10-C04/ECC02

Contents

Tuya ZigBee/WiFi Smart Curtain Switch Module User Manual

Model: QS-S10-C04/ECC02

Brand: Tuya

1. Introduction

This manual provides detailed instructions for the installation, setup, and operation of your Tuya ZigBee/WiFi Smart Curtain Switch Module. This module is designed to integrate seamlessly with your smart home system, allowing you to control your roller shutters and blinds remotely, via voice commands, or through scheduled timers. Please read this manual carefully before installation and use to ensure safe and optimal performance.

2. Package Contents

  • 1 x Smart Curtain Module (QS-S10-C04 or ECC02)
  • 1 x User Manual

3. Specifications

FeatureDetail
Product TypeWi-Fi/Zigbee Curtain Module
VoltageAC100-240V 50/60Hz
Max. Load3A
Operation Frequency2.412GHz-2.484GHz
Operation Temperature-10℃ ~ 40℃
ProtocolWIFI IEEE 802.11b/g/n (for WiFi version), Zigbee (for Zigbee version)
Dimensions (WxDxH)39.2 x 39.2 x 18 mm
IP RatingIP20
Zigbee GatewayRequired (for Zigbee version)
App CompatibilitySmart Life, Tuya Smart
CertificationCE

4. Safety Information

  • Ensure the power is OFF before installation or maintenance.
  • Installation should be performed by a qualified electrician or in accordance with local electrical codes.
  • Do not exceed the maximum load of 3A.
  • Operate within the specified temperature range (-10℃ to 40℃).
  • Keep the device away from water and high humidity environments.
  • This device is for indoor use only (IP20 rating).

5. Installation

The smart curtain module is designed to be installed behind your existing curtain switch. Ensure you have a neutral wire available in your switch box.

5.1 Wiring Diagram

Detailed wiring diagram for the Mini Zigbee Curtain Module
Detailed wiring diagram for the Mini Zigbee Curtain Module, showing connections for Live (L), Neutral (N), Motor (M), and Up/Down control lines.
Mini Zigbee Curtain Module dimensions and wiring diagram
Mini Zigbee Curtain Module dimensions and wiring diagram. Shows input (100-240V AC 50/60Hz), Max 3A, Frequency (2.4GHz-2.484GHz), IEEE802.15.4, and CE/RoHS certifications. Dimensions are 39mm x 39mm x 18mm.

5.2 Installation Steps

  1. Turn off Power: Before starting any electrical work, ensure the main power supply to the circuit is turned off at the circuit breaker.
  2. Remove Existing Switch: Carefully remove your existing curtain switch from the wall box.
  3. Identify Wires: Identify the Live (L), Neutral (N), Motor (M), and Up/Down control wires. If unsure, consult a qualified electrician.
  4. Connect the Module: Connect the wires to the smart curtain module according to the wiring diagram provided.
    • Connect the Live wire from the power supply to the 'L' terminal on the module.
    • Connect the Neutral wire from the power supply to the 'N' terminal on the module.
    • Connect the motor's Live wire to the 'M' terminal on the module.
    • Connect the Up control wire from your physical switch to the '▲' terminal on the module.
    • Connect the Down control wire from your physical switch to the '▼' terminal on the module.
  5. Mount the Module: Place the smart module inside the wall box, ensuring it fits without obstruction. Its compact size (39.2x39.2x18 mm) is designed for this purpose.
  6. Reinstall Switch: Reinstall your original curtain switch over the wall box.
  7. Restore Power: Turn the main power supply back on.

6. Initial Setup and App Pairing

To use the smart features, you need to pair the module with the Smart Life or Tuya Smart app.

6.1 For WiFi Version

  1. Download App: Download the 'Smart Life' or 'Tuya Smart' app from your smartphone's app store (iOS or Android).
  2. Register/Login: Open the app and register for a new account or log in with an existing one.
  3. Add Device: In the app, tap '+' to add a new device. Select 'Curtain Switch' or 'Curtain Module' from the device list.
  4. Enter WiFi Details: Follow the in-app instructions to connect the module to your 2.4GHz WiFi network. You may need to put the module into pairing mode (often indicated by a blinking light).
  5. Rename Device: Once connected, you can rename the device for easy identification (e.g., 'Living Room Curtains').

6.2 For Zigbee Version

A Zigbee gateway (hub) is required for the Zigbee version of this module.

  1. Ensure Gateway is Set Up: Make sure your Zigbee gateway is already set up and connected to the Smart Life or Tuya Smart app.
  2. Add Device: In the app, tap '+' to add a new device. Select 'Curtain Switch' or 'Curtain Module' from the device list.
  3. Search for Device: Follow the in-app instructions to put the gateway into pairing mode and then put the curtain module into pairing mode. The app will search for and discover the Zigbee module.
  4. Rename Device: Once connected, you can rename the device for easy identification.

7. Operating Instructions

7.1 App Remote Control

Control your curtains from anywhere using the Smart Life or Tuya Smart app.

Smartphone app interface for remote control
Smartphone screen displaying the 'Curtain switch' app interface for remote control, showing open/close percentage and schedule options.

From the app, you can:

  • Open or close your curtains/blinds.
  • Adjust the opening percentage (e.g., 50% open).
  • View the current status of your curtains.
Traditional switch control vs. mobile phone remote control
Comparison image showing traditional switch control versus mobile phone remote control for the curtain module.

7.2 Voice Control

Integrate with Amazon Alexa or Google Assistant for hands-free control.

Voice control with Alexa/Google Assistant
Illustration of voice control functionality with Amazon Alexa and Google Assistant, showing a person in bed issuing a voice command to close the curtain switch.

Common voice commands:

  • "Alexa, open [Device Name] curtains."
  • "Hey Google, close [Device Name] blinds."
  • "Alexa, set [Device Name] to 50% open."

7.3 Timer Schedule & Countdown

Set automated schedules for your curtains/blinds.

Smartphone app interface for setting timing, countdown, and schedule functions
Smartphone app interface for setting timing, countdown, and schedule functions for the curtain module, with examples like '7:30 open (only once)' and 'Open at 7:00 every day'.

In the app, navigate to the device settings to set up:

  • Schedules: Program your curtains to open or close at specific times on specific days (e.g., open at 7:00 AM every weekday).
  • Countdown: Set a timer for the curtains to open or close after a certain duration (e.g., close after 1 hour).

7.4 Device Sharing

Share control of the smart module with family members.

Device sharing feature illustration
Diagram illustrating the device sharing feature, allowing multiple family members to control the smart curtain module via their smartphones.

In the app, go to the device settings and look for the 'Share Device' option. You can invite other users to control the module, allowing everyone in the household to manage the curtains.

8. Maintenance

  • Keep the module clean and dry. Use a soft, dry cloth for cleaning.
  • Do not use harsh chemicals or abrasive cleaners.
  • Ensure proper ventilation around the module if installed in a confined space.
  • Regularly check for firmware updates in the Smart Life/Tuya Smart app to ensure optimal performance and security.

9. Troubleshooting

ProblemPossible Solution
Module not respondingCheck power supply. Ensure wiring is correct. Restart the module by cycling power.
Cannot pair with appEnsure your phone is connected to a 2.4GHz WiFi network. Put the module into pairing mode (refer to app instructions). For Zigbee, ensure the gateway is online and in pairing mode.
Voice control not workingEnsure the module is linked to your Alexa/Google Assistant account in the Smart Life/Tuya Smart app. Check your internet connection. Verify the device name used in voice commands.
Curtains not moving correctlyCheck motor wiring. Ensure the motor is functioning properly. Calibrate the curtain travel limits if supported by your motor/app.
Intermittent connectionEnsure the module is within range of your WiFi router or Zigbee gateway. Reduce interference from other devices.

10. User Tips

  • Test Before Closing: Before fully closing up the wall box, test the module's functionality with both the physical switch and the app to ensure all connections are secure and working.
  • Label Wires: If you're unsure about wiring, label your existing wires before disconnecting them to avoid confusion during installation.
  • Consider a Zigbee Gateway: For Zigbee versions, a dedicated Zigbee gateway often provides a more stable and responsive smart home network compared to relying solely on WiFi.
  • Explore Automation: Utilize the app's automation features to create scenes (e.g., 'Good Morning' scene to open curtains and turn on lights) for enhanced convenience.

11. Warranty and Support

For warranty information and technical support, please refer to the seller's policy or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.

© 2023 Tuya. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.