eletechsup Schumann Resonances External Antenna (ANTSA01, ANTSB02, ANTSC03)

Contents

eletechsup Schumann Resonances External Antenna User Manual

Models: ANTSA01, ANTSB02, ANTSC03

Brand: eletechsup

1. Introduction

This manual provides comprehensive instructions for the eletechsup Schumann Resonances External Antenna. This antenna is designed to be used in conjunction with a compatible Schumann wave signal generator to produce Schumann resonance frequencies. It is important to note that this antenna cannot function independently and requires a signal generator for operation. Compatible signal generators include models such as SMLDA01, SMJAC03, SMECN04, SMECL04, SMSPN06, and SMLDB11.

2. Safety Information

  • Ensure the antenna is connected to a compatible signal generator with appropriate voltage and current specifications.
  • Avoid exposing the antenna to moisture, extreme temperatures, or direct sunlight.
  • Do not attempt to modify or disassemble the antenna, as this may void the warranty and pose a safety risk.
  • Keep the device out of reach of children.

3. Product Overview

3.1 Components

  • Schumann Resonances External Antenna (ANTSA01, ANTSB02, or ANTSC03 model)
  • 3.5MM Audio Cable (for connection to signal generator)

Note: A Schumann wave signal generator is required and sold separately.

3.2 Features

  • Designed for generating Schumann resonance frequencies when paired with a compatible signal generator.
  • Wide frequency range support: 0.01-300KHZ.
  • Standard 3.5MM audio input interface for easy connection.
  • Available in multiple sizes to suit various applications.

3.3 Product Visuals

Three Schumann Resonances External Antennas (ANTSA01, ANTSB02, ANTSC03) with their respective sizes.
Figure 1: Three Schumann Resonances External Antennas (ANTSA01, ANTSB02, ANTSC03) with their respective sizes.
Size comparison of the three Schumann Resonances External Antennas.
Figure 2: Size comparison of the three Schumann Resonances External Antennas.
ANTSA01 Small Schumann Resonances External Antenna with 3.5mm audio cable.
Figure 3: ANTSA01 Small Schumann Resonances External Antenna with 3.5mm audio cable.
ANTSB02 Medium Schumann Resonances External Antenna with 3.5mm audio cable.
Figure 4: ANTSB02 Medium Schumann Resonances External Antenna with 3.5mm audio cable.
ANTSC03 Large Schumann Resonances External Antenna with 3.5mm audio cable.
Figure 5: ANTSC03 Large Schumann Resonances External Antenna with 3.5mm audio cable.
Video 1: Demonstration of connecting the Schumann Resonances External Antenna to a signal generator.

4. Specifications

FeatureANTSA01 (Small Antenna)ANTSB02 (Medium Antenna)ANTSC03 (Large Antenna)
Input Signal Amplitude1-12V1-12V1-12V
Frequency Range0.01-300KHZ0.01-300KHZ0.01-300KHZ
Input Interface3.5MM Audio3.5MM Audio3.5MM Audio
Size51*50*8MM100*100*8MM150*150*8MM
Weight9 gram34 gram75 gram

4.1 Compatible Signal Generator (SMSPN06 Example)

FeatureSpecification
Working VoltageDC 5V
Working Current13-17MA
Power InterfaceType-C (Supports Type-C to Type-C power supply)
Default Frequency7.83Hz
Adjustment Range0.01Hz~9999Hz Pure Sine Wave
Signal Voltage Amplitude3V
Audio Output3.5MM
Size78*50*8MM (Mini Size)
Weight17g (Light weight)

5. Setup and Installation

  1. Prepare the Signal Generator: Ensure your Schumann wave signal generator (e.g., SMLDA01, SMSPN06) is powered on and ready for use.
  2. Connect the Audio Cable: Take the provided 3.5MM audio cable. Insert one end into the 3.5MM audio input jack on the Schumann Resonances External Antenna.
  3. Connect to Signal Generator: Insert the other end of the 3.5MM audio cable into the corresponding 3.5MM audio output jack on your signal generator.
  4. Placement: Place the antenna in the desired location. The effectiveness may vary based on placement and environmental factors.
  5. Power On: Ensure both the signal generator and any other connected devices are powered on according to their respective manuals.

6. Operating Instructions

  1. Once the antenna is correctly connected to the signal generator, refer to your signal generator's user manual for specific operating instructions.
  2. Typically, you will need to set the desired frequency on the signal generator. The antenna is designed to work within a frequency range of 0.01-300KHZ.
  3. Adjust the signal amplitude on your generator as needed, ensuring it is within the 1-12V input range for the antenna.
  4. Monitor the signal generator's display to confirm the output frequency and amplitude.

7. Maintenance

  • Cleaning: Use a soft, dry cloth to gently wipe the surface of the antenna. Do not use liquid cleaners or abrasive materials.
  • Storage: When not in use, store the antenna in a cool, dry place away from direct sunlight and extreme temperatures.
  • Handling: Handle the antenna with care to avoid physical damage.

8. Troubleshooting

  • No Signal Output:
    • Ensure the 3.5MM audio cable is securely connected to both the antenna and the signal generator.
    • Verify that the signal generator is powered on and functioning correctly.
    • Check the signal generator's settings (frequency, amplitude) to ensure they are configured properly.
  • Intermittent Signal:
    • Inspect the audio cable for any damage or loose connections.
    • Ensure the antenna is placed on a stable surface and not subject to vibrations.
  • Antenna Not Recognized:
    • This antenna is a passive component; it does not require 'recognition' by a signal generator. Ensure the signal generator is correctly configured to output a signal through its audio jack.

9. User Tips

  • For optimal performance, experiment with the placement of the antenna relative to your signal generator and surrounding environment.
  • Ensure the signal generator's output amplitude is set appropriately for the antenna's input range (1-12V) to avoid damage or poor performance.

10. Warranty and Support

For specific warranty information and technical support, please refer to the documentation provided with your purchase or contact the seller directly. The antenna is a simple accessory; for issues related to signal generation or frequency adjustment, consult the manual for your specific Schumann wave signal generator.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.