1. Introduction
This manual provides instructions for the eletechsup Schumann Resonance External Antennas (models ANTSA01, ANTSB02, and ANTSC03). These antennas are designed to work in conjunction with a compatible Schumann wave signal generator to produce Schumann resonance frequencies. Please note that these antennas are passive accessories and cannot function independently without a signal generator.
Important Note: This is a Schumann resonance external antenna. It cannot work alone and requires a Schumann wave signal generator to generate signals. Recommended signal generators include SMLDA01, SMJAC03, SMECN04, SMECL04, SMSPN06, and SMLDB11.
2. Specifications
The eletechsup Schumann Resonance External Antennas are available in three sizes, each with specific characteristics:



Antenna Models
| Feature | ANTSA01 (Small Antenna) | ANTSB02 (Medium Antenna) | ANTSC03 (Large Antenna) |
|---|---|---|---|
| Input Signal Amplitude | 1-12V | 1-12V | 1-12V |
| Frequency Range | 0.01-300KHZ | 0.01-300KHZ | 0.01-300KHZ |
| Input Interface | 3.5MM audio | 3.5MM audio | 3.5MM audio |
| Size | 51*50*8MM | 100*100*8MM | 150*150*8MM |
| Weight | 9 gram | 34 gram | 75 gram |



Recommended Signal Generator (SMSPN06) Specifications
While this manual focuses on the antenna, here are the specifications for a recommended signal generator, the SMSPN06, for reference:
| Feature | SMSPN06 Signal Generator |
|---|---|
| Working Voltage | DC 5V |
| Working Current | 13-17MA |
| Power Interface | Type-C (Supports Type-C to Type-C power supply) |
| Default Frequency | 7.83Hz |
| Adjustment Range | 0.01Hz~9999Hz Pure Sine Wave |
| Signal Voltage Amplitude | 3V |
| Audio Output | 3.5MM |
| Size | 78*50*8MM (Mini Size) |
| Weight | 17g (Light weight) |


3. Setup
- Prepare Signal Generator: Ensure your Schumann wave signal generator (e.g., SMSPN06) is powered on and configured to output the desired frequency (e.g., 7.83Hz).
- Connect Antenna: Use a standard 3.5mm audio cable to connect the external antenna to the 3.5mm audio output jack of your signal generator.
- Placement: Place the antenna in the desired location for optimal Schumann resonance field generation. The effectiveness may vary based on the environment and distance.
4. Operation
The external antenna is a passive component that transmits the Schumann resonance signal generated by a compatible signal generator. Its operation is directly controlled by the signal generator.
- Power On Signal Generator: Activate your Schumann wave signal generator according to its own instruction manual.
- Verify Connection: Ensure the 3.5mm audio cable is securely connected between the signal generator and the antenna.
- Adjust Settings (on Signal Generator): Use the controls on your signal generator to adjust the frequency and amplitude as needed. The antenna will passively broadcast the signal it receives.
For detailed operational instructions regarding frequency adjustment, power settings, or other functions, please refer to the instruction manual provided with your specific Schumann wave signal generator.
5. Maintenance
- Cleaning: Wipe the antenna surface with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
- Storage: Store the antenna in a dry, cool place away from direct sunlight and extreme temperatures when not in use.
- Handling: Handle the antenna carefully to avoid physical damage. Do not bend or apply excessive force to the board.
- Connectivity: Periodically check the 3.5mm audio cable for any signs of wear or damage. Replace if necessary to ensure optimal signal transmission.
6. Troubleshooting
- No Signal Output:
- Ensure the signal generator is powered on and functioning correctly.
- Check the 3.5mm audio cable connection between the antenna and the signal generator. Ensure it is fully inserted and not damaged.
- Verify the signal generator's settings (frequency, amplitude) are correctly configured.
- Intermittent Signal:
- Inspect the 3.5mm audio cable for loose connections or internal breaks. Try a different cable if available.
- Ensure the antenna is placed on a stable surface and not subject to vibrations or interference.
- Antenna Damage: If the antenna board appears physically damaged, it may not function correctly and should be replaced.
7. Warranty and Support
For warranty information, technical support, or further assistance, please contact the seller or manufacturer directly. As the antenna is a passive accessory, specific warranty terms may be tied to the signal generator it is used with. Please retain your purchase receipt for any warranty claims.