HXCONTROLLER MPPT 80A Solar Battery Charge Controller

Contents

MPPT Solar Battery Charge Controller Instruction Manual

Model: MPPT 80A Solar Battery Charge Controller

Brand: HXCONTROLLER

1. Introduction and Overview

This HXCONTROLLER MPPT Solar Battery Charge Controller is designed for solar off-grid power generation systems to automatically manage battery charging and discharging. It incorporates innovative Maximum Power Point Tracking (MPPT) technology, which significantly enhances the energy utilization rate of the solar system, achieving a conversion efficiency as high as 97%.

The controller quickly scans the entire I-V curve to efficiently track the maximum power point, ensuring optimal power harvest from your solar panels. Its advanced algorithm and comprehensive self-test and electronic protection functions prevent damage from installation errors and system failures, while optimizing the battery charging process to extend battery life and improve overall system performance.

2. Safety Information

To ensure safe operation and proper heat dissipation, observe the following safety clearances during installation. Ensure that no other equipment or objects are within these specified distances from the controller.

Installation safety distance diagram showing 20cm clearance on left and right, and 30cm clearance above and below the controller.

Figure 2.1: Recommended Installation Safety Distances

3. Product Features

  • Advanced MPPT Technology: High tracking efficiency up to 98% and peak conversion efficiency of 99%.
  • Wide Battery Compatibility: Supports various battery types including Lead-acid (Sealed, Flooded, GEL), Lithium Iron Phosphate, Lithium-ion, and User-defined settings.
  • 3-Stage Charging: Features Equalize Charge, Boost Charge, and Float Charge for optimal battery health.
  • Comprehensive Protection Functions: Includes self-recovery, short-circuit protection, reverse connect protection, open-circuit protection, over-current protection, and high-temperature protection.
  • Efficient Cooling: Equipped with automatic fan cooling to maintain optimal operating temperature.
  • User-Friendly Display: Features an HD LCD screen for clear monitoring and parameter settings.
  • Communication Interface: Includes an RS485 communication interface for multi-machine communication and convenient monitoring of operating parameters.
Diagram illustrating advanced MPPT technology with 98% tracking efficiency and 99% conversion efficiency, showing the 80A size of the controller.

Figure 3.1: Advanced MPPT Technology Overview

Diagram showing compatibility with Lithium, Flooded, Sealed, GEL, and User Custom Battery types, along with 3-stage charging (Equalize, Boost, Float).

Figure 3.2: Battery Compatibility and Charging Stages

Diagram highlighting protection features like self-recovery, short-circuit, reverse connect, open-circuit, over-current, and high-temperature protection, along with automatic fan cooling, easy installation, and HD LCD screen.

Figure 3.3: Protection Features and Key Components

4. Setup

4.1. Component Identification

Labeled diagram of the MPPT solar controller showing: 1. Temperature sensor interface, 2. Solar panels input, 3. Battery input, 4. DC load output, 5. RS485 interface, 6. Terminal box cover plate, 7. LCD display, 8. Cooling hole.

Figure 4.1: Controller Port Identification

4.2. Wiring Connection Method

Follow the correct wiring sequence to ensure safe and proper operation of the solar controller:

  1. First, connect the positive (+) and negative (-) electrodes of the battery to the corresponding terminals on the controller.
  2. Next, connect the positive (+) and negative (-) poles of the DC load to the DC load terminals.
  3. Finally, connect the positive (+) and negative (-) poles of the solar panel (PV) to the solar panel input terminals.

Always ensure all connections are secure and correctly polarized before powering on the system.

Detailed connection diagram for the MPPT solar controller, showing connections from PV panel (with breaker and connector) to the controller, then to the battery (with fuse), and to DC load and an inverter for AC load. Supported battery types are listed.

Figure 4.2: System Connection Diagram

5. Operating Instructions

5.1. LCD Display Overview

The HD LCD screen provides real-time information about your solar system. Here's what each section indicates:

  • 1. DC Voltage: Displays the current DC voltage.
  • 2. Controller Generation Wattage: Shows the power being generated by the controller.
  • 3. Charging Current: Indicates the current flowing into the battery.
  • 4. Battery Voltage: Displays the current battery voltage.
  • 5. Total Power Generation: Shows the cumulative power generated.
Close-up of the LCD display on the MPPT controller, with labels pointing to: 1. DC Voltage, 2. Controller Generation Wattage, 3. Charging Current, 4. Battery Voltage, 5. Total Power Generation.

Figure 5.1: LCD Display Information

5.2. Parameter Setting Steps

To access and modify settings, follow these steps:

  1. From the default main interface, press the SET button to enter the main menu.
  2. Use the UP and DOWN buttons to navigate through the submenu options.
  3. Press the CONFIRM (3S) button to select an option or confirm a setting.
Diagram illustrating the parameter setting steps on the controller's LCD. It shows how to enter the main menu, navigate options like Language, DC Output, Battery Type, Charging Current, and Reset, and how to adjust values.

Figure 5.2: Parameter Setting Flowchart

5.2.1. Language Setting

The controller supports both Chinese and English display languages. Navigate to 'Language' in the menu and select your preferred language.

5.2.2. DC Output Setting

This option allows you to turn the DC load output ON or OFF. Select 'DC Output' and toggle the setting as needed.

5.2.3. Battery Type Setting

The controller has built-in profiles for several battery types. You can also define custom battery parameters. Navigate to 'Battery Type' and select from the following options:

  • 1. Lead Acid
  • 2. Gel
  • 3. LifePo4
  • 4. Li-ion
  • 5. USER (for custom settings)

After selecting the battery type, you may need to confirm or set the required voltage parameters. For 'USER' battery type, you can adjust Equalizing charge, floating charge, and DC discharge limit voltage (8V - 170V).

Video 5.1: Demonstrating Battery Type Setting on the Controller

5.2.4. Charging Current Setting

The charging current setting range varies depending on the specific product model. Refer to the 'Parameter Table' in the Specifications section for detailed information on adjustable charging current ranges (e.g., 0-30A, 0-40A, etc.).

5.2.5. Restore Factory Settings

If you need to clear all recorded data or reset the controller to its default settings, navigate to the 'Reset' option in the menu and confirm to restore factory settings.

6. Specifications

The following table provides detailed technical specifications for the MPPT Solar Battery Charge Controller:

Feature30A40A50A60A100A120A
Rated charging current30A40A50A60A100A120A
Maximum PV Input Power (12V system)360W480W600W720W1200W1440W
Maximum PV Input Power (24V system)720W960W1200W1400W2400W2880W
Maximum PV Input Power (36V system)1080W1440W1800W2160W3600W4320W
Maximum PV Input Power (48V system)1440W1920W2400W2880W4800W5760W
Maximum PV Input Power (60V system)1800W2400W3000W3600W6000W7200W
Maximum PV Input Power (72V system)2160W2880W3600W7320W7200W8640W
Maximum PV Input Power (84V system)2520W3360W4200W5040W8400W10080W
Maximum PV Input Power (96V system)2880W3840W4800W5760W9600W11520W
Charging modeMPPT automatic maximum power tracking, fast charging, balanced charging and floating charging
Battery type (Lead acid battery)(12V / 24V / 36V / 48V / 96V automatic identification) + (12V / 24V / 36V / 48V / 60V / 72V / 84V / 96V adjustable)
Battery type (Gel Battery)12V / 24V / 36V / 48V / 60V / 72V / 84V / 96V adjustable
Battery type (Lithium iron phosphate)Unit voltage 3.2 * number of strings (2-45 adjustable)
Battery type (Ternary lithium battery)Unit voltage 3.7 * number of strings (2-45 adjustable)
Battery type (User defined)Equalizing charge, floating charge, DC discharge limit voltage adjustable: 8V -- 170V
With lithium activation functionWith photovoltaic input, there is charging voltage (activate lithium battery), and DC output can be used without battery
Photovoltaic minimum voltage start ChargingThe photovoltaic voltage is greater than +3V of the battery voltage (it can also be charged with small current in rainy days)
PV maximum open circuit input voltage0-230V0-430V
Photovoltaic charging current adjustable0-30A0-40A0-50A0-60A0-100A0-120A
DC current output (street lamp function)DC continuous output 25Acontinuous output 60ADC continuous output 100A
Temperature compensationAutomatically compensate the charging voltage and current according to the battery temperature to prolong the battery life
LCD touch button (Display)Generating capacity / photovoltaic voltage / battery voltage / charging current / power / operation status
LCD touch button (Setting)Battery type, charging current, return to factory, Chinese and English display
485 communication8-pin RS485 communication interface (operation status and setting can be queried)
Working environment temperature~-10℃ to +45℃
Static power consumption2W
Overall efficiency96.5%~99%
Temperature protection85℃
Temperature rise protectionReduce power output above 80℃
Protection functionPhotovoltaic array short-circuit, over-voltage, over-current reverse connection protection, battery overcharge, reverse connection protection, under voltage protection
Humidity0~90% RH (no condensation)
Mechanical protection levelIP21
Altitude0~3000m
Size (30A-60A models)202mm*215mm*100mm
Size (100A-120A models)218mm*265mm*100mm
Net / gross weight (30A-60A models)1.95KG
Net / gross weight (100A-120A models)2.6KG
Package size (30A-60A models)265mm*224mm*120mm
Package size (100A-120A models)315mm*240mm*120mm

Table 6.1: MPPT Controller Parameter Table

7. Troubleshooting

The controller is equipped with comprehensive electronic protection functions to prevent damage. If you encounter issues, check the following:

  • No Power/Display: Verify battery connections and ensure the battery has sufficient charge. Check for reverse polarity.
  • No Charging: Ensure solar panels are connected correctly and receiving adequate sunlight. Check PV voltage and current on the LCD. Verify battery type settings are correct.
  • Overcharge Protection: The controller will automatically stop charging when the battery reaches its full charge voltage, as per the set battery type.
  • Over-discharge Protection (LVD): The controller will disconnect the load if the battery voltage drops below the Low Voltage Disconnect (LVD) threshold to prevent battery damage.
  • Short-circuit/Over-current Protection: The controller will automatically protect against short circuits in the PV array or DC load, and against over-current conditions. Check for faulty wiring or overloaded devices.
  • Reverse Connection Protection: The controller is protected against reverse polarity connections for both PV and battery inputs. Correct the wiring if this occurs.
  • High-Temperature Protection: If the controller's internal temperature exceeds 80°C, it will reduce power output. Ensure adequate ventilation and observe installation safety distances.
  • Alarm Indicator: If the ALARM indicator is lit, refer to the LCD display for specific error codes or messages to diagnose the issue.

8. Maintenance

Regular maintenance helps ensure the longevity and optimal performance of your MPPT solar charge controller:

  • Cleanliness: Keep the controller clean and free from dust and debris. Use a dry, soft cloth for cleaning.
  • Ventilation: Ensure that the cooling holes and fan (if present) are not obstructed to allow for proper airflow and heat dissipation.
  • Connections: Periodically check all wiring connections (solar panels, battery, DC load) for tightness and corrosion. Loose connections can lead to power loss or overheating.
  • Environmental Conditions: Ensure the controller is installed in a dry, well-ventilated area, away from direct sunlight, moisture, and corrosive gases.
  • Firmware Updates: Check the manufacturer's website for any available firmware updates that may improve performance or add new features.

9. User Tips

  • RS485 Communication: The RS485 interface allows for querying the controller's operation status and settings. This can be useful for remote monitoring or integration into larger systems.
  • Battery Voltage Configuration: For Lithium Iron Phosphate batteries, the controller allows for adjustable unit voltage based on the number of strings (3.2V * number of strings, 2-45 adjustable). For a 52V nominal LiFePO4 battery, ensure the 'USER' battery type is selected and configured correctly to match your battery's specific voltage requirements.
  • Wi-Fi Connectivity: The controller features an RS485 communication interface for wired communication. Direct Wi-Fi connectivity is not explicitly stated as a built-in feature; external modules may be required for wireless monitoring.

10. Warranty and Support

This product is CE certified, indicating compliance with European safety, health, and environmental protection requirements.

For specific warranty details, technical support, or service inquiries, please contact HXCONTROLLER Official Store directly or refer to the warranty card included with your product. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.