Blackbird CS1, HR1

Contents

BLACKBIRD CS1 Bike Speed/Cadence Dual Sensor & HR1 Heart Rate Belt User Manual

Model: CS1, HR1

Brand: Blackbird

1. Introduction

This manual provides detailed instructions for the BLACKBIRD CS1 Bike Speed/Cadence Dual Sensor and the BLACKBIRD HR1 Heart Rate Belt. These devices are designed to enhance your cycling experience by providing accurate speed, cadence, and heart rate data, compatible with various cycling computers and applications.

The CS1 sensor features dual-mode functionality for both speed and cadence tracking, utilizing geomagnetic and acceleration sensors. The HR1 is a professional training heart rate belt, lightweight and comfortable.

BLACKBIRD CS1 Speed/Cadence Sensor and HR1 Heart Rate Sensor

Image: BLACKBIRD CS1 Speed/Cadence Sensor and HR1 Heart Rate Sensor.

2. Package Contents

2.1. CS1 Bike Speed/Cadence Sensor

  • CS1 Sensor (1)
  • Silicone Pads (2)
  • Rubber Bands (2)
  • CR2032 Battery (1)
BLACKBIRD CS1 Sensor package contents

Image: Contents of the BLACKBIRD CS1 Sensor package.

2.2. HR1 Heart Rate Belt

  • HR1 Heart Rate Sensor (1)
  • Adjustable Chest Strap (1)
  • CR2032 Battery (1)
BLACKBIRD HR1 Heart Rate Belt

Image: BLACKBIRD HR1 Heart Rate Belt.

3. Specifications

3.1. BLACKBIRD CS1 Bike Speed/Cadence Sensor

FeatureSpecification
ModelBB CS1
Size38mm × 29mm × 9mm
Weight8.1g
BatteryCR2032
Battery Life (Cadence Mode)500 hours
Battery Life (Speed Mode)300 hours
Waterproof RatingIP67
Operating Temperature-20°C to 50°C
Compatible AppsBlackbird, Garmin, Wahoo, Zwift, Tacx, etc.
ProtocolsBLE5.0 / ANT+
Max Cadence220 rpm
Max Speed100 km/h
BLACKBIRD CS1 Sensor internal components and accuracy

Image: Advanced processing circuits and algorithms for stable and accurate data.

3.2. BLACKBIRD HR1 Heart Rate Belt

FeatureSpecification
ModelBB HR1
Size31mm × 58mm × 11mm
Weight (without battery)10.4g
BatteryCR2032
Battery Life1000 hours
Heart Rate Range30-240 BPM (±1%)
Waterproof RatingIP67
Compatible AppsBlackbird, Garmin, Wahoo, Zwift, etc.
ProtocolsBLE5.0 / ANT+
BLACKBIRD HR1 Heart Rate Belt featherweight design and adjustable strap

Image: HR1 Heart Rate Belt featuring a featherweight design (10.4g, 1cm thick) and an adjustable chest strap.

4. Setup and Installation

4.1. Battery Installation (CS1 & HR1)

  1. Open the battery compartment by turning the rotary switch on the back cover counterclockwise from the locked position to the unlocked position.
  2. Remove the transparent plastic insulating gasket (if present) from the battery.
  3. Ensure the CR2032 battery is inserted with the positive pole ("+") facing upwards. The positive pole has text markings, while the negative pole has small dots.
  4. After the battery is correctly installed, fully press the battery cover and turn it clockwise to align the indicator to the locked position.

Note: Reinstalling the battery is also how you switch the function mode for the CS1 sensor.

4.2. BLACKBIRD CS1 Sensor Installation

The CS1 sensor can be installed as either a speed sensor or a cadence sensor. The mode is determined by the sensor's orientation and indicated by the LED light.

  • Speed Mode (Green Light):
    1. Ensure the indicator light flashes green. If not, reinstall the battery to switch to speed mode.
    2. Install the sensor on the front wheel hub using the provided silicone pad and rubber ring.
    3. Wake up the sensor by spinning the wheel.
  • Cadence Mode (Red Light):
    1. Ensure the indicator light flashes red. If not, reinstall the battery to switch to cadence mode.
    2. Install the flat silicone gasket on the bottom of the sensor.
    3. Attach the sensor to the inside of the crank using a rubber ring.
    4. Wake up the sensor by rotating the crank.
BLACKBIRD CS1 Sensor installation instructions and mode switching

Image: CS1 Sensor installation diagrams for speed and cadence modes, and battery reinstallation for mode switching.

BLACKBIRD CS1 Speed/Cadence Sensor mounted on a bike wheel hub

Image: CS1 Speed/Cadence Sensor mounted on a bike wheel hub.

4.3. BLACKBIRD HR1 Heart Rate Belt Installation

  1. Attach the HR1 sensor module to the adjustable chest strap.
  2. Moisten the electrode areas on the back of the strap with water or electrode gel for better contact.
  3. Position the chest strap around your chest, just below your pectoral muscles, ensuring the sensor module is centered.
  4. Adjust the strap for a snug, comfortable fit.
BLACKBIRD HR1 Heart Rate Belt connectivity diagram

Image: HR1 Heart Rate Belt showing connectivity to various devices.

5. Operation

5.1. Power On/Off and Wake Up

  • The devices do not have a manual power button. They automatically power on when motion is detected.
  • To wake up the CS1 sensor, spin the wheel (for speed mode) or rotate the crank (for cadence mode).
  • To wake up the HR1 heart rate belt, wear it correctly on your chest.
  • Both devices feature an intelligent sleep mode and will automatically enter sleep after 90 seconds of static inactivity.
BLACKBIRD CS1 Sensor indicator light

Image: CS1 Sensor indicator light, showing it wakes up immediately with motion.

5.2. Connecting to Devices (ANT+ & BLE5.0)

Both the CS1 sensor and HR1 heart rate belt support dual ANT+ and BLE5.0 protocols, allowing connection to a wide range of cycling computers, smartwatches, and mobile applications.

  1. Ensure the sensor is awake (see 5.1). The indicator light will flash when ready to connect.
  2. On your cycling computer, smartwatch, or mobile app, navigate to the sensor pairing or add device menu.
  3. Select the BLACKBIRD sensor from the list of available devices.
  4. Once connected, the indicator light on the sensor may change or stop flashing, depending on the model.
BLACKBIRD sensors supporting ANT+ and BLE5.0 connectivity

Image: BLACKBIRD sensors supporting ANT+ and BLE5.0, compatible with various devices and software.

Important Note for CS1: When the CS1 sensor is working, it can only run in one mode (either speed or cadence). If you require both speed and cadence data simultaneously, it is recommended to use two separate CS1 sensors, one configured for speed and one for cadence.

6. Maintenance

6.1. Cleaning

  • Sensors (CS1 & HR1 Module): Wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • HR1 Chest Strap: The chest strap can be hand-washed with mild soap and water. Rinse thoroughly and hang to dry. Do not machine wash or tumble dry.

6.2. Battery Replacement

When the battery is low, the sensor's performance may degrade, or it may stop transmitting data. Replace the CR2032 battery as described in Section 4.1.

For CS1, remember that replacing the battery also serves as the method to switch between speed and cadence modes.

6.3. Storage

Store the sensors in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, it is advisable to remove the battery to prevent leakage.

BLACKBIRD HR1 Heart Rate Belt with IP67 waterproof rating

Image: HR1 Heart Rate Belt highlighting its IP67 waterproof rating, suitable for use in various weather conditions.

7. Troubleshooting

ProblemPossible CauseSolution
Sensor not detected by device
  • Sensor is asleep.
  • Low battery.
  • Incorrect installation/mode (CS1).
  • Bluetooth/ANT+ interference.
  • Wake up sensor by moving it (spinning wheel/crank for CS1, wearing for HR1).
  • Replace battery.
  • Verify CS1 mode (green for speed, red for cadence) and installation.
  • Move away from other electronic devices.
Inaccurate data readings
  • Loose sensor/strap.
  • Dry electrodes (HR1).
  • Interference.
  • Ensure sensor/strap is securely mounted.
  • Moisten HR1 electrodes.
  • Check for other wireless devices nearby.
CS1 stuck in one modeMode not successfully switched.Reinstall the battery carefully, ensuring the desired mode's light flashes upon reinsertion.

8. Warranty and Support

For detailed warranty information and customer support, please refer to the official Blackbird website or contact your retailer.

A comprehensive user manual in PDF format is available for download: User Manual (PDF).

Manufacturer: Beijing Blackbird Tech Co., Ltd.

Website: www.blackbirdsport.com

Email: support@blackbirdsport.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.