1. Introduction
Thank you for choosing the K&F CONCEPT KF-V99 Pro 99Wh V-Mount Battery. This high-capacity, versatile power solution is designed for professional photographers and videographers, offering robust power delivery, multiple output options, and intelligent monitoring. Please read this manual carefully to ensure proper usage and maximize the lifespan of your battery.

2. Package Contents
Please check the box for the following items:
- 1x KF-V99 Pro V-Mount Battery
- 1x 240W USB-C Charging Cable
- 1x User Manual

3. Key Features
- High Capacity & Air Travel Friendly: 99Wh (6700mAh at 14.8V) capacity, compliant with airline carry-on regulations.
- 100W Bi-Directional PD Fast Charging: USB-C port supports both input and output at up to 100W, allowing the battery to be fully recharged in approximately 2.5 hours with a compatible 100W PD charger.
- Extensive Connectivity Options: Equipped with multiple output ports including:
- 2x USB-C (USB-C1: Max 100W, USB-C2: Max 65W)
- 1x USB-A (Max 24W)
- 1x DC 12V (Max 3A)
- 1x BP/D-Tap (Max 7A)
- Real-Time TFT Color Display: A clear digital screen monitors real-time voltage, power output for each port, and overall battery level.
- Robust Construction: Built with durable aluminum alloy and fire-resistant PC, featuring a scratch-resistant acrylic cover for enhanced longevity.
- Emergency Lighting: Integrated emergency night light for use in low-light conditions.
- Comprehensive Safety Protections: Built-in intelligent Battery Management System (BMS) provides protection against temperature, over-voltage, over-discharge, over-current, over-charge, and short-circuit.


4. Setup and Charging
4.1 Initial Charge
Before first use, fully charge the battery. Connect the provided USB-C charging cable to the USB-C1 port on the battery and to a compatible 100W (or above) Power Delivery (PD) charger. The TFT digital screen will display the charging status.

4.2 Charging Time
The battery can be fully charged in approximately 2.5 hours when using a 100W PD fast charger.
5. Operation
5.1 Powering Devices
Connect your devices to the appropriate output ports. The battery supports simultaneous charging/powering of multiple devices, but note that the total power output of C1/C2/USB-A/DC interfaces should not exceed 100W simultaneously.

5.2 TFT Digital Screen
The intelligent TFT digital screen provides real-time information:
- TDP: Total battery power (to ensure device safety and avoid exceeding 100W).
- Percentage: Remaining battery capacity.
- C-1: USB-C1 port output or input.
- C-2: USB-C2 port output.
- A: USB-A port output.
- DC: DC 12V port output.

5.3 Emergency Light
The battery features an emergency night light. Press the designated button (as shown in the product video) to activate it. This can assist in setting up equipment or navigating in dimly lit environments.

5.4 Applications
The KF-V99 Pro is suitable for various professional applications:
- Handheld camera shooting
- Powering photography lights
- Fixed position recording setups
- General backup power bank for laptops, smartphones, and tablets



6. Maintenance
- Storage: Store the battery in a cool, dry place away from direct sunlight and extreme temperatures. For long-term storage, it is recommended to keep the battery charged to about 50-70%.
- Cleaning: Use a soft, dry cloth to clean the battery's exterior. Do not use harsh chemicals or abrasive materials. Keep the ports free from dust and debris.
- Avoid Impact: Despite its robust construction, avoid dropping or subjecting the battery to strong impacts.
- Temperature: Do not expose the battery to temperatures below -10°C (14°F) or above 45°C (113°F) during operation or storage.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Battery not charging | Charger not connected properly; charger not powerful enough; faulty cable. | Ensure cable is securely connected. Use a 100W PD charger. Try a different USB-C cable. |
| Device not powering on/charging | Battery depleted; incorrect port used; device not compatible; total output exceeds 100W. | Check battery level on TFT screen. Ensure device is connected to the correct port. Verify device compatibility. Reduce the number of connected devices if total output exceeds 100W. |
| TFT screen not displaying | Battery off; screen malfunction. | Ensure battery is powered on. If problem persists, contact customer support. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | K&F CONCEPT |
| Model | KF-V99 Pro |
| Rated Capacity | 14.8V 6.7Ah 99.16Wh |
| Material | Aluminum Alloy + Fireproof PC |
| Rated Power | 100W charging and discharging (USB-C1) |
| Charging Time | 2.5 hours (using an adapter of 100W or above) |
| Input (USB-C) | 20V=5A (Max 100W) |
| Input (BP/D-Tap) | 8A (Max) |
| Output (USB-C1) | 5V=3A, 9V=3A, 12V=3A, 15V=3A, 20V=5A (Max 100W) |
| Output (USB-C2) | 5V=3A, 9V=3A, 12V=3A, 15V=3A, 20V=3.25A (Max 65W) |
| Output (USB-A) | 5V=3A, 9V=2A, 12V=2A (Max 24W) |
| Output (BP/D-Tap) | 14.8V=12A (Max) |
| Output (DC) | 12V=3A |
9. User Tips
No specific user tips were available from reviews or Q&A for this product. However, general best practices for V-mount batteries include:
- Always use the appropriate cables and adapters for your devices to ensure optimal charging and prevent damage.
- Monitor the TFT screen regularly to keep track of battery levels and individual port outputs, especially when powering multiple devices.
- When traveling by air, ensure the battery's capacity (99Wh) complies with current airline regulations for carry-on luggage.
10. Warranty and Support
K&F CONCEPT products typically come with a manufacturer's warranty. Please refer to the warranty card included in your package or visit the official K&F CONCEPT website for detailed warranty information and terms. For technical support, troubleshooting assistance, or any product-related inquiries, please contact K&F CONCEPT customer service through their official channels.