Introduction
The Joyroom JR-CB3 Bluetooth 5.4 Car Adapter is designed to upgrade your in-car audio system, enabling wireless music streaming and hands-free calling through your vehicle's AUX input. Featuring advanced Bluetooth 5.4 technology and dual microphones with ENC noise cancellation, it ensures a stable connection and crystal-clear communication for a safer and more enjoyable driving experience.
Safety Information
- Always prioritize safe driving. Do not operate the device in a way that distracts you from the road.
- Ensure proper installation to prevent interference with vehicle controls.
- The AUX Bluetooth adapter has built-in withstand voltage protection, overcurrent protection, short circuit protection, and NTC overheat protection. Use only with compatible power sources.
- Avoid exposing the device to extreme temperatures, direct sunlight, or moisture.
Product Overview & Features
The Joyroom JR-CB3 offers a range of features designed for convenience and high-quality audio in your car:
- Advanced Bluetooth 5.4: Provides a faster, more stable, and smarter connection with minimal sound quality loss. Offers up to 100ft (approx. 30m) working distance.
- Enhanced Dual Microphones with ENC Noise Cancellation: Dual microphones collect your voice from 360° for smoother calls. Upgraded CVC8.0 technology and a built-in filter IC effectively reduce road noise, wind noise, and other distractions, ensuring clearer hands-free calls (noise reduction up to 35dB).
- Plug and Play: Simple setup; automatically pairs with your phone upon car startup after initial connection.
- Multifunction Button & LED Light Design: Independent buttons for easy control of music (skip tracks, volume up/down), calls (answer, hang up, call back), and voice assistant activation. LED lights improve visibility at night.
- Dual Device Connection: Allows pairing and simultaneous connection of two devices, enabling seamless switching between music and calls.
- Dual Reading Modes: Supports both 3.5mm AUX Bluetooth wireless play and TF card play.
- Eye-Level Operation: Designed for safe operation, keeping controls closer to eye level to minimize distraction while driving.
Setup Instructions
Follow these steps to set up your Joyroom JR-CB3 Car Adapter:
-
Mounting the Adapter:
- Remove the protective film from the adhesive pad.
- Stick the adhesive pad securely onto a clean, flat surface on your car's dashboard, ideally near eye level for safe operation.
- Place the wireless receiver onto the adhesive pad.
-
Connecting to Power and Audio:
- Insert the USB connector of the receiver into a compatible USB power supply in your car (e.g., car charger, car's USB port). The light ring on the adapter will illuminate, indicating it is powered on.
- Plug the 3.5mm audio cable of the receiver into the 3.5mm AUX input port of your car's audio system.
-
Bluetooth Pairing:
- Turn on the Bluetooth function on your mobile phone.
- Search for Bluetooth devices and select "JR-CB3" from the list to connect.
- Once connected, you can enjoy hands-free calling and high-quality music.
Friendly Tip: It takes only 1 second to complete pairing, and no need to repeat pairing after the first successful pairing with your device.
Operating Instructions
Music Playback:
- Volume Control: Use the '+' and '-' buttons on the adapter to adjust the volume.
- Skip Tracks: Use the 'Previous' (◀◀) and 'Next' (▶▶) buttons to navigate through your music.
- Play/Pause: Press the central call button briefly to play or pause music.
Hands-Free Calling:
- Answer Call: Press the central call button once when an incoming call rings.
- End Call: Press the central call button once during an active call to hang up.
- Reject Call: Press and hold the central call button for a few seconds to reject an incoming call.
- Redial Last Number: Double-press the central call button to redial the last outgoing number.
Voice Assistant:
- Activate Voice Assistant: Press and hold the central call button to activate your phone's voice assistant (e.g., Siri, Google Assistant).
Dual Device Connection:
The adapter supports connecting two devices simultaneously. When two devices are connected, the adapter will prioritize the device that initiates playback or a call. You can switch between devices by pausing one and starting playback on the other.
TF Card Playback:
Insert a TF card into the designated slot on the adapter. The adapter will automatically switch to TF card playback mode. Use the music control buttons to manage playback.
Maintenance
- Cleaning: Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the adapter in a cool, dry place when not in use.
- Cable Care: Avoid bending or twisting the cables excessively to prevent damage.
Troubleshooting
- Q: Why can't the receiver be connected?
-
- The receiver may already be connected to another device (e.g., another phone or computer). Disconnect it from the current device and attempt to reconnect.
- For iPhone users, Bluetooth may not automatically refresh. Manually tap "JR-CB3" in your phone's Bluetooth settings to connect.
- If the above steps fail, try restoring the receiver to factory settings (refer to specific instructions if available, otherwise, power cycle the device).
- Q: Why is the sound of the receiver too low?
-
- For Android users: Ensure the playback channel of your mobile phone is enabled. Go to your phone's Bluetooth settings, find "JR-CB3", and ensure both "media channel" and "call channel" are turned on.
- For iPhone users: Check your phone's "Settings" interface for any maximum volume limits that might be enabled.
- Due to varying operating systems, the receiver's volume may not synchronize with your phone or car audio. Manually increase the volume on your mobile phone, the JR-CB3 receiver, and your car audio system independently.
Specifications
| Attribute | Value |
|---|---|
| Model Number | JR-CB3 |
| Brand Name | Joyroom |
| Wireless Type | Bluetooth |
| Bluetooth Version | V5.4 |
| Sound Track | 5.1 |
| Interface | 3.5 MM (AUX), USB (Input) |
| Audio Codec | SBC (Support AAC: Yes, Support Apt-x: No) |
| Supported Protocols | HSP, HFP, A2DP, AVRCP |
| Supported Modes | Bluetooth, TF card |
| Transmission Range | ≤12m |
| Frequency Range | 20Hz-20KHz |
| Microphone Sensitivity | -38±2dB |
| Product Input | 5V |
| Product Material | ABS+PC |
| Certification | CE |
User Tips
- For optimal sound quality, ensure your phone's media channel is enabled (Android) and check for any volume limits (iPhone).
- If experiencing connection issues, try disconnecting from other devices or manually selecting 'JR-CB3' in your phone's Bluetooth settings.
- Utilize the independent control buttons for safer operation while driving, keeping your eyes on the road.
- Take advantage of the dual device connection feature to seamlessly switch between personal and work phones, or between different music sources.
Warranty & Support
Joyroom products are designed for reliability and performance. For product support, technical assistance, or warranty inquiries, please refer to the contact information provided on your product packaging or visit the official Joyroom website. We are committed to providing excellent customer service.