Dooya DC1650/DC1651

Contents

Dooya DC1650/DC1651 Electric Curtain Wall Switch User Manual

Models: DC1650 (Single Channel), DC1651 (Double Channel)

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Dooya DC1650 Single Channel and DC1651 Double Channel Wall Switches for electric curtains. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

2. Product Variants

The Dooya wall switches are available in two main variants:

  • DC1650 Single Channel Wall Switch: Designed for controlling one electric curtain motor.
  • DC1651 Double Channel Wall Switch: Designed for controlling two independent electric curtain motors.
Dooya DC1650 Single Channel Wall Switch and its packaging
Dooya DC1650 Single Channel Wall Switch
Close-up view of Dooya DC1650 Single Channel Wall Switch
Close-up of DC1650
Dooya DC1651 Double Channel Wall Switch and its packaging
Dooya DC1651 Double Channel Wall Switch
Close-up view of Dooya DC1651 Double Channel Wall Switch
Close-up of DC1651

3. Specifications

FeatureDetail
Model NumbersDC1650 / DC1651
Voltage110-240V
Wattage0W (Control signal only)
CertificationCE, RoHS
OriginMainland China
Battery IncludedNo (for wall switch)
Package Length15 cm
Package Width15 cm
Package Height16 cm
Package Weight0.3 kg

4. Installation

Installation of the Dooya wall switch should be performed by a qualified electrician or a person with sufficient knowledge of electrical wiring to ensure safety and compliance with local electrical codes.

4.1 General Wiring Guidelines

  • Ensure the main power supply to the circuit is turned OFF before beginning any wiring.
  • Connect the wall switch to the electric curtain motor according to the motor's specific wiring diagram. Typically, this involves connecting Live, Neutral, Up, Down, and Stop/Common wires.
  • Securely mount the wall switch to a standard electrical wall box.
  • Ensure all connections are tight and properly insulated.

Warning: Incorrect wiring can lead to electric shock, fire, or damage to the device and motor. If you are unsure, consult a professional.

5. Pairing with Electric Curtain Motor

Follow these steps to pair your Dooya wall switch with a compatible electric curtain motor. This process establishes communication between the switch and the motor.

  1. Power On Motor: Connect the electric curtain motor to power. You should hear a beep, and the motor will briefly rotate.
  2. Initiate Pairing on Switch: On the Dooya wall switch, simultaneously press and hold the "Up" (▲) button and the "Pause" (—) button.
  3. Confirm Pairing Mode: Press the "Up" (▲) and "Pause" (—) buttons twice in quick succession.
  4. Finalize Pairing: Press the "Up" (▲) button once more.

Upon successful pairing, the motor should respond, indicating that the wall switch is now linked and ready for operation.

Video demonstrating the pairing process for the Dooya wall switch with an electric curtain motor.

6. Operation

Once installed and paired, operating your electric curtains with the Dooya wall switch is straightforward:

  • Up (▲) Button: Press to open the curtains.
  • Down (▼) Button: Press to close the curtains.
  • Pause (—) Button: Press to stop the curtains at any desired position.

For DC1651 Double Channel switches, each set of buttons controls a separate curtain motor.

Dooya DC1650 Single Channel Wall Switch in a room setting, illustrating wireless control
Example of Dooya wall switch in use.

7. Maintenance

  • Cleaning: Wipe the surface of the wall switch with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
  • Power: The wall switch is wired and does not require batteries. If you have a separate remote control for your electric curtains, ensure its batteries are replaced as needed.
  • Inspection: Periodically check for any loose connections or visible damage. If any issues are found, disconnect power and consult a qualified technician.

8. Troubleshooting

ProblemPossible CauseSolution
Curtain motor does not respond to switch.No power to motor or switch; Switch not paired; Wiring issue.Check power supply; Re-attempt pairing (Section 5); Verify wiring connections.
Curtains move in the wrong direction.Motor direction reversed during installation or programming.Consult your motor's manual for direction reversal instructions.
Switch buttons are unresponsive.Internal fault; Power issue.Check power supply; If problem persists, contact support.

9. User Tips

  • For optimal performance, ensure the wall switch is installed within the recommended range of your electric curtain motor.
  • If controlling multiple curtains with a DC1651 switch, clearly label which channel controls which curtain for ease of use.
  • Consider testing the full range of motion (up and down limits) of your curtains after installation and pairing to ensure they operate as expected.

10. Warranty and Support

For warranty information or technical support, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.