1. Introduction
The SUNSHINE S-918M Multi Functional Thermal Screen Separation Machine is an advanced tool designed for efficient and safe disassembly of mobile phone screens, including both curved and flat types. It features a dual-sided heating structure, powerful dual-pump suction, and a versatile platform for frame removal and screen separation. This manual provides essential information for the safe and effective operation and maintenance of your device.

The SUNSHINE S-918M machine, an enhanced version for universal curved and flat screens.
2. Safety Information
WARNING: Please read all safety instructions carefully before operating the device to prevent injury or damage.
- Always ensure the machine is placed on a stable, level, and heat-resistant surface.
- Do not operate the machine near flammable materials or in explosive atmospheres.
- Wear appropriate personal protective equipment (PPE), such as heat-resistant gloves and safety glasses, during operation.
- Ensure the power supply matches the rated voltage of the machine (220V or 110V as customized).
- Do not touch the heating plates directly when the machine is powered on or hot.
- Unplug the machine from the power outlet when not in use or before cleaning/maintenance.
- Keep children and unauthorized personnel away from the operating area.
- Do not attempt to modify or repair the machine yourself. Contact qualified service personnel.
- Ensure proper ventilation in the work area.
3. Product Features
The S-918M is engineered with several innovative features to enhance efficiency and safety in screen repair:
- 2-Sided Heating Structure: Innovative design provides higher and more uniform temperature for effective separation.
- Specialized for Curved Screens: Optimized for disassembling curved screens with ease.
- Hot-Detachable Frame and Screen: Facilitates quick separation to improve repair efficiency.
- Quick Separation: Independent control of upper and lower suction, combined with strong suction, ensures fast and efficient separation.
- Wide-Angle Frame Removal: Features a full-view large panel suction cup frame removal, with left and right tilt 50° and 360° rotating platform, detachable platform, and short platform design for versatile operation.
- Split Structure Design: Quick plug and unplug mechanism allows for rapid conversion between frame remover and separator.
- Active Buckle Clamping Structure: Detachable clamping plate rotates to accommodate various mobile phone sizes, with a tightening buckle for secure middle frame clamping.
- Safety Protection: Side cushion protection prevents scratches and damage to the phone during disassembly.
- Slide Rail Strong Suction Cup: Adjustable upper suction cup position ensures even force, stable absorption, and prevents accidental drops.
- Movable Splint: Removable and adjustable splint for convenience, with a dedicated storage hole.
- New Surround Silicone Pad Design: Provides firm and reliable suction.
- Intelligent Temperature Control: Quick and accurate temperature control for precise heating.
- Dual Suction Switch: Independent upper and lower suction control, with a one-button vacuum break for convenient screen removal.
- Knob Tension Design: Large/small knob tension design allows precise adjustment of upward suction to prevent screen damage.
- Magnetic Fixation Design: Enhances convenience and efficiency during maintenance.
- Camera Protection Design: Smooth grooves are integrated to prevent damage to the camera module during screen removal.

Key features and design elements of the S-918M.
4. Specifications
| Attribute | Value |
|---|---|
| Brand | SUNSHINE |
| Product Name | Multifunctional frame remover and screen separator |
| Model | S-918M |
| Product Size | 340*270*300mm |
| Packing Size | 390*330*250mm |
| Net Weight | ≈ 5.0kg |
| Gross Weight | ≈ 5.9kg |
| Rated Voltage | 220V (110V can be customized) |
| Current | 6A |
| Total Power | 500W (lower suction cup 350W upper suction cup 150W) |
| Working Effective Size | Lower suction cup 165*75mm, upper suction cup 84*44mm |
| Heating Temperature Range/Accuracy | 0-140°C ±5°C |
| Heating Method | Heating tube |
| Material | Cold-rolled steel plate + aluminum alloy |
| Negative Pressure Parameter (Kpa) | -55 |
| Configuration | Host*1, Moving card block*1, Frame removal card block*1, Power cord*1, Desktop fixing screws*4, Silicone pad*2, Instruction manual*1 |

Dimensional diagram of the S-918M.
5. Setup
5.1 Unboxing and Inspection
Carefully remove all components from the packaging. Verify that all items listed in the "Configuration" section of the specifications are present and undamaged. Keep the packaging for future storage or transport.

Contents included in the S-918M package.
5.2 Component Identification
Familiarize yourself with the various parts of the S-918M machine:

Labeled diagram of the S-918M components and controls.
- Upper Disassembly Rotating Handle: Adjusts the height and angle of the upper heating plate.
- Tension Rail Knob: Controls the tension of the upper suction cup.
- Silicone Strip Design: Provides secure grip and heat insulation.
- Surrounding Silicone: Enhances suction and protects the device.
- Upper Removal Suction Cup: Applies suction to the screen for separation.
- Frame Removal Fixture: Secures the device during frame removal.
- Silicone Pad: Protects the device and aids in heat distribution.
- Separation Platform: Main working surface for screen separation.
- Movable Splint: Supports and positions the device.
- Movable Splint Control Knob: Adjusts the position of the movable splint.
- Control Rotation Handle: Allows rotation of the working platform.
- Left and Right Tilt Knob: Adjusts the tilt angle of the platform.
- Separate Panel Suction Switch: Activates suction for the main separation platform.
- Temperature Display: Shows the current temperature of the heating plates.
- Temperature Setting Key: Used to adjust the desired temperature.
- Machine Fixing Hole: For securing the machine to a workbench (using provided screws).
- Upper Suction Cup Suction Switch: Activates suction for the upper removal suction cup.
5.3 Initial Placement and Power Connection
- Place the machine on a sturdy, flat, and heat-resistant workbench.
- If desired, use the provided desktop fixing screws to secure the machine through the machine fixing holes.
- Connect the power cord to the machine's power input and then to a compatible power outlet. Ensure the voltage matches the machine's requirements.
- Ensure all switches are in the "OFF" position before plugging in.
6. Operating Instructions
The S-918M is versatile for various screen repair tasks. Always ensure the device you are working on is powered off and any necessary components (e.g., SIM tray) are removed.
6.1 General Operation Overview
Demonstration of screen separation using the S-918M.
6.2 Screen Separation (Curved and Flat)
- Power On: Turn on the main power switch. The temperature displays will light up.
- Set Temperature: Use the "Temperature Setting Key" for both "UPPER THERMOSTAT" and "SEPARATION THERMOSTAT" to set the desired heating temperature. A common starting point for most phone screens is 80-100°C, but this may vary depending on the device and adhesive. Allow the machine to reach the set temperature.
- Position Device: Place the mobile phone screen onto the separation platform, ensuring it is centered and aligned. Use the movable splint to secure the device if needed.
- Activate Lower Suction: Turn on the "Separate Panel Suction Switch" to secure the device to the lower heating plate.
- Engage Upper Heating (if applicable): For devices requiring dual-sided heating, lower the upper removal suction cup using the "Upper Disassembly Rotating Handle" until it makes contact with the screen. Activate the "Upper Suction Cup Suction Switch". Adjust the "Tension Rail Knob" to apply gentle, even pressure.
- Heat and Separate: Allow the device to heat for a few minutes. Once the adhesive is softened, carefully use a thin prying tool (not included) to gently separate the screen from the frame. The dual suction helps hold the components in place during separation.
- Release Suction: Once separated, turn off the suction switches and carefully remove the screen.

Various operational modes for screen and frame separation.
6.3 Frame Removal
The S-918M can also assist in removing the frame from the screen assembly.
- Configure for Frame Removal: Attach the frame removal card block to the platform if not already installed.
- Position Device: Place the screen assembly onto the frame removal fixture. The active buckle clamping structure can be used to secure the middle frame.
- Apply Heat: Set the desired temperature for the lower heating plate.
- Remove Frame: Once the adhesive is softened, carefully work around the edges to separate the frame from the screen. The wide-angle frame removal feature allows for tilting and rotation to access different angles.

Wide-angle frame removal capabilities.
7. Maintenance
- Cleaning: After each use, ensure the machine is cooled down and unplugged. Wipe the heating plates and surrounding areas with a soft, dry cloth to remove any adhesive residue or debris. Do not use abrasive cleaners or solvents.
- Silicone Pads: Inspect the silicone pads regularly for wear and tear. Replace them if they become damaged or lose their effectiveness.
- Suction System: Periodically check the suction cups and hoses for blockages or leaks. Ensure the dual pump system is functioning correctly.
- Storage: Store the machine in a clean, dry environment away from direct sunlight and extreme temperatures.
- Moving Parts: Keep all adjustable mechanisms and knobs clean and free of debris to ensure smooth operation.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not power on. | No power supply; power cord loose; main switch off. | Check power connection; ensure main switch is ON; verify power outlet functionality. |
| Heating plates not heating. | Temperature not set; heating element fault. | Set desired temperature; if problem persists, contact support. |
| Weak or no suction. | Suction switch off; silicone pad damaged/dirty; air leak in system; pump malfunction. | Ensure suction switches are ON; clean/replace silicone pads; check hoses for leaks; contact support if pump issue suspected. |
| Screen separation is difficult. | Insufficient heating time/temperature; incorrect prying technique. | Increase heating time or temperature (within safe limits); use appropriate prying tools and technique. |
9. User Tips
- Pre-heating: Always allow the machine to fully reach the set temperature before placing the device on it for optimal adhesive softening.
- Temperature Control: Different devices and adhesives may require different temperatures. Start with lower temperatures and gradually increase if necessary, always monitoring the device for signs of damage.
- Tool Compatibility: While the S-918M is a versatile separation machine, specific tools (e.g., specialized prying tools, cutting wires) may be required for certain devices, especially for glass removal on larger screens like tablets. Ensure you have the correct supplementary tools for your specific repair task.
- Gentle Approach: Screen separation requires patience and a gentle touch. Avoid excessive force, which can damage the screen or internal components.
- Cleanliness: Keep your workspace and the machine clean to prevent dust or debris from getting trapped between screen layers during reassembly.
10. Warranty and Support
This product comes with a manufacturer's warranty against defects in materials and workmanship. For detailed warranty information, service, or technical support, please refer to the documentation provided with your purchase or contact the official SUNSHINE customer service. Do not attempt to repair the device yourself, as this may void your warranty.