Introduction
Thank you for choosing the BAOFENG K6 Pro HAM Two Way Radio. This manual provides essential information for the safe and efficient operation of your device. The K6 Pro is a versatile handheld interphone featuring tri-band frequency capabilities, a dark screen display, USB-C charging, and AM receiver functionality, designed for amateur radio enthusiasts.
Package Contents
Please check the package for the following items:
- 1x BAOFENG K6pro Radio (dark screen display)
- 1x Li-ion battery Pack (USB C port)
- 1x Belt Clip
- 1x Hand Strap
- 1x Desktop Charger
- 1x User Manual

Product Overview
The BAOFENG K6 Pro features a robust design with a 1.54-inch high-definition color screen for clear display of frequencies and settings. It includes a full keypad for direct frequency input and menu navigation, along with dedicated buttons for A/B band selection, V/M mode switching, and an EXIT button. The radio is equipped with a durable antenna and a rotary knob for power and volume control.



Setup Guide
1. Battery Installation
- Align the Li-ion battery pack with the battery compartment on the back of the radio.
- Gently push the battery into place until it clicks securely.
- To remove, press the release latch (if present) and slide the battery out.

2. Charging the Battery
The BAOFENG K6 Pro supports both desktop charger and USB Type-C direct charging.
- Using the Desktop Charger: Place the radio with the battery installed into the desktop charging cradle. Ensure the charging contacts align. The indicator light on the charger will show charging status.
- Using USB Type-C: Connect a USB Type-C cable to the radio's USB-C port and to a compatible power source (DC10V 15W or less). Note: Do not use PD or other rapid chargers as they are not supported.
3. Attaching the Antenna
Screw the antenna clockwise into the connector on the top of the radio until it is finger-tight. Do not overtighten.
Operating Instructions
1. Power On/Off and Volume Control
Rotate the top-mounted knob clockwise to power on the radio. Continue rotating clockwise to increase the volume. Rotate counter-clockwise to decrease volume and power off.
2. Mode Switching (Channel/Frequency)
Press the V/M button to switch between Channel mode and Frequency (VFO) mode. To quickly switch between Channel mode and Frequency mode, press the F button followed by the 3 button.
3. Frequency Selection
- In Frequency Mode: Use the keypad to directly input the desired frequency.
- In Channel Mode: Use the UP/DOWN arrow buttons or the keypad to select a stored channel.
4. NOAA Weather Forecast
The radio supports 10 USA NOAA weather forecast channels. Refer to the full user manual for specific instructions on accessing and monitoring these channels.
5. FM Radio
The K6 Pro includes an FM radio function (65-108MHz RX). Activate it through the menu or a dedicated shortcut (refer to the full manual).
6. VOX (Voice Operated Transmission)
VOX allows for hands-free transmission. When enabled, the radio will transmit automatically when it detects your voice. Adjust VOX sensitivity in the menu.
7. Scanning Functions
The radio supports Frequency, DCS, and CTCSS scanning. These functions help you find active frequencies or tones.
8. Cross-band Communication
The K6 Pro supports cross-band communication, allowing you to transmit on one band and receive on another.
9. Wireless Frequency Copy
This feature allows you to wirelessly copy frequencies from other radios, including other Quansheng UV-K6 radios.
10. Emergency Alert
The radio has an auto/manual emergency alert function. Consult the full manual for details on how to activate and configure this feature.
11. Built-in Torch
Activate the high-light torch for illumination in low-light conditions.
12. Video Demonstration
Maintenance
- Cleaning: Use a soft, damp cloth to clean the radio's exterior. Do not use harsh chemicals or solvents.
- Battery Care: To prolong battery life, avoid overcharging or completely discharging the battery. Store the radio and battery in a cool, dry place when not in use.
- Storage: If storing the radio for an extended period, remove the battery.
- Water Resistance: The radio is rated IP55 for water resistance, meaning it is protected against dust and low-pressure water jets. It is not designed for submersion.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Radio does not power on. | Battery is low or not installed correctly. | Charge the battery or re-install it securely. |
| Cannot transmit or receive. | Incorrect frequency/channel, antenna not attached, or out of range. | Verify frequency/channel, ensure antenna is attached, move closer to other radios. |
| Poor audio quality. | Low battery, weak signal, or incorrect squelch setting. | Charge battery, adjust squelch level, ensure clear line of sight. |
| USB-C charging not working. | Incompatible charger (e.g., PD rapid charger) or faulty cable. | Use a standard USB-C charger (DC10V 15W or less). Try a different cable. |
Specifications

General
- Brand Name: BAOFENG
- Model Number: K6pro
- Walkie Talkie Type: Portable
- Material: Plastic
- Dimensions: 145x50x25mm
- Origin: Mainland China
- Certification: CE, FCC, RoHS
- Is Display: Yes
- Waterproof / Water-Resistant: IP55
- Working Temperature: -20℃ to +60℃
- Antenna Impedance: 50Ω
- Frequency Stability: ±1ppm
Frequency & Channels
- Frequency Range:
- RX / TX: 136-174MHz (F1)
- RX / TX: 200-260MHz (F2)
- RX / TX: 400-480MHz (F3)
- RX (AM): 108-136MHz (F4 - Air Band)
- RX (Police): 350-390MHz (F5)
- RX (FM): 65-108MHz (F6 - FM Radio)
- Storage Channel: 640
- Number of Channels: 999
- Number of FM Radios: 16
- Number of NOAA Channels: 10
Power & Battery
- Output Power(w): 5w-10w
- Maximum Range: 5km-10km
- Battery Capacity(mAh): 2600mAh
- Battery Included: Yes
- USB Type C Port Input Limit: DC10V 15W or less (Does not support PD or other rapid chargers)
Transmitter
- Modulation Mode: FM: 11KOF3E(12.5KHz), 16K0F3E(25KHz)
- Transmitting Power: ≤5W
- Emission Current: ≤1.5A
- Maximum Frequency Deviation: ≤5KHz(25KHz), ≤2.5KHz(12.5KHz)
- Modulation Distortion: ≤5%
- Stray Power: ≤7.5uW
- Adjacent Channel Power: 70dB(25KHz), 60dB(12.5KHz)
- Residual Modulation: 40dB
Receiver
- Audio Power: ≥0.5W
- Audio Distortion: ≤10%
User Tips
- Always ensure your antenna is properly connected before transmitting to prevent damage to the radio.
- Experiment with different squelch levels to find the optimal balance between receiving weak signals and filtering out noise.
- For best range, operate in open areas with a clear line of sight. Obstacles like buildings and dense foliage can significantly reduce range.
- Regularly check for firmware updates from the manufacturer's official website to ensure optimal performance and access to new features.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact details provided by your retailer or the official BAOFENG website. Keep your purchase receipt as proof of purchase.