LAUNCH X431 Creader TPMS 5011 V2

Contents

LAUNCH X431 Creader TPMS 5011 V2 User Manual

Model: X431 Creader TPMS 5011 V2

Brand: LAUNCH

1. Introduction

The LAUNCH X431 Creader TPMS 5011 V2 is a professional Tire Pressure Monitoring System (TPMS) service tool designed for comprehensive tire system diagnostics and maintenance. This intelligent device operates on an Android system, offering advanced functions such as TPMS sensor activation, reading, diagnosis, learning, and programming. It supports both 315MHz and 433MHz sensors, providing broad vehicle coverage. Additionally, it includes full OBDII/EOBD diagnostic capabilities and 12 essential maintenance service functions, making it an indispensable tool for automotive technicians and DIY enthusiasts.

This manual provides detailed instructions on how to use your LAUNCH X431 Creader TPMS 5011 V2, covering safety precautions, setup, operation, maintenance, and troubleshooting.

2. Safety Precautions

Read all safety warnings and instructions carefully. Failure to heed these warnings may result in electric shock, fire, and/or serious injury. Save all safety warnings and instructions for future reference.

  • There are no user-serviceable parts. Have the device serviced by a qualified repair person using only identical replacement parts. Disassembling the device will void the warranty.
  • CAUTION: This device contains an internal Lithium Polymer battery. To reduce the risk of fire or burns, do not disassemble, crush, pierce, or dispose of the battery in fire or water.
  • This product is not a toy. Do not allow children to play with or near this item.
  • Do not expose the device to rain or wet conditions.
  • Do not place the device on any unstable surface.
  • Never leave the device unattended during the charging process. The device must be placed on a non-flammable surface during charging.
  • Handle the device with care. If dropped, check for breakage and any other conditions that may affect its operation.
  • Put blocks in front of the drive wheels and never leave the vehicle unattended while testing.
  • Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or heavy dust.
  • Keep the device dry, clean, free from oil, water, or grease. Use a mild detergent on a clean cloth to clean the outside of the device when necessary.
  • People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemakers could cause pacemaker interference or pacemaker failure.
  • Use the device only with the specific diagnostic tool that comes loaded with the TPMS module and the Android smartphone that is installed with the i-TPMS app.
  • Do not install programmed TPMS sensors in damaged wheels.
  • While programming a sensor, do not place the device close to several sensors at the same time, which may result in programming failure.
  • The warnings, precautions, and instructions discussed in this manual cannot cover all possible conditions and situations. Common sense and caution must always be exercised by the operator.

3. Components & Controls

The i-TPMS device is designed for ease of use with clearly labeled components.

LAUNCH X431 Creader TPMS 5011 V2 device with labeled components
Figure 3.1: LAUNCH X431 Creader TPMS 5011 V2 Device Overview
  1. Charging LED: Red indicates charging; Green indicates fully charged.
  2. UP Button: Navigates up or increases values.
  3. DOWN Button: Navigates down or decreases values.
  4. Charging Port: Connects to the charging cable.
  5. Sensor Slot: Insert a sensor here to activate and program it.
  6. Display Screen: Shows all operational information.
  7. POWER Button: Turns the tool on/off.
  8. OK (Confirm) Button: Confirms selections or operations.

4. Technical Parameters

ParameterValue
Screen1.77 inch
Input VoltageDC 5V
Size205*57*25.5mm
Working Temperature-10°C ~ 50°C
Storage Temperature-20°C ~ 60°C
Battery6000 mAh
Operating SystemAndroid 8.1
Memory2+32 GB
ConnectivityWi-Fi, Bluetooth
Supported Languages11 (German, English, Spanish, French, Korean, Italian, Japanese, Traditional Chinese, Portuguese, Russian, Arabic)

5. Accessory Included

Upon opening the package, please verify the presence of the following components. Note that accessories may vary slightly by region; consult your seller for specific details.

Package contents including i-TPMS device, diagnostic cable, charging cable, and user manual
Figure 5.1: Package Contents
  • i-TPMS Device (LAUNCH X431 Creader TPMS 5011 V2) x 1
  • Diagnostic Cable x 1
  • Charging Cable x 1
  • Quick Start Guide x 1
  • User Manual (this document) x 1

6. Working Principle

The i-TPMS device works in conjunction with a specific diagnostic tool or a smartphone running the i-TPMS app to perform various TPMS functions. The device communicates wirelessly via Bluetooth and radio frequency (RF) signals.

Diagram illustrating the working principle of i-TPMS with a diagnostic tool or smartphone and vehicle sensors
Figure 6.1: i-TPMS Working Principle

Notes:

  • The diagnostic tool must be a specific scanner loaded with the TPMS module.
  • Due to hardware limitations, the i-TPMS app on the smartphone achieves fewer functions than the TPMS module on a dedicated diagnostic tool.
  • A stable wireless communication must be established between the i-TPMS and the diagnostic tool or smartphone.

7. Setup and Initial Use

7.1. Charging & Powering On

  1. Plug one end of the charging cable into the charging port of the i-TPMS device, and the other end to an external power adapter (not included).
  2. Connect the power adapter to an AC outlet. The Charging LED will illuminate red during charging and turn green when fully charged.
  3. Press the POWER button for about 3 seconds to turn the device on. A beep will sound, and the screen will light up.

7.2. Button Operations

  • UP/DOWN Buttons: Used to switch between different tire positions or navigate menus.
  • POWER Button: Press for ~3 seconds to turn on/off. Press once to enter hibernate mode (screen off). Press once to wake up from hibernate mode.
  • Automatic Power Off: If the device is not charging and there is no operation for 30 minutes, it will automatically power off. If charging, it will enter hibernate mode after 5 minutes of inactivity.
  • OK Button: Confirms the current operation or selection.

7.3. i-TPMS App Download (for Android Smartphone users)

For Android smartphone users, scan the following QR code to download and install the i-TPMS app on your phone. This app allows you to use the device with your smartphone.

QR code for i-TPMS app download
Figure 7.1: i-TPMS App QR Code

7.4. Getting Started Flowchart

For initial use, follow these steps:

  1. Enter TPMS/i-TPMS on the diagnostic tool/smartphone.
  2. Search for the desired i-TPMS and connect it via Bluetooth. (Ensure i-TPMS is powered on. If firmware is outdated, it will auto-upgrade.)
  3. Select the target region.
  4. Select the vehicle manufacturer.
  5. Select the vehicle model and year.
  6. Select the TPMS function (Activation, Programming, Learning, Diagnosis).
  7. Follow on-screen instructions to proceed.

Note: For indirect TPMS vehicles, only the Learning function is supported. For Direct TPMS, functions generally include Activation, Programming, Learning, and Diagnosis. Available functions may vary by vehicle and TPMS app version.

8. Operating Instructions

8.1. Job Menu (i-TPMS App on Android Smartphone)

When using the i-TPMS app on an Android smartphone, the following screen will appear:

i-TPMS app job menu screen
Figure 8.1: i-TPMS App Job Menu
  • Display Mode Switch Button: Tap to switch between different display modes.
  • Settings Button: Tap to enter the settings screen.
  • Bluetooth Pairing Button: Tap to scan for available Bluetooth devices and pair. A link icon will appear once paired.
  • Function Module:
    • Select Vehicle: Tap to select the desired vehicle manufacturer.
    • OE Query: Tap to check the OE number of the sensors.
    • History Report: Tap to view historical TPMS test reports.

8.2. TPMS Operations

The i-TPMS device supports various TPMS functions. The following sections detail these operations.

8.2.1. Activate Sensor

This function allows you to activate TPMS sensors to view sensor data such as sensor ID, tire pressure, tire frequency, tire temperature, and battery condition.

Activating a TPMS sensor with the device
Figure 8.2: Sensor Activation
  • The tool performs TPMS tests in sequence: FL (Front Left), FR (Front Right), RR (Rear Right), LR (Rear Left), and SPARE (if applicable). You can also use the UP/DOWN buttons to move to the desired wheel for testing.
  • For universal sensors, place the i-TPMS alongside the valve stem, point toward the sensor location, and press the OK button.
  • Once successfully activated and decoded, the i-TPMS will vibrate slightly, and the screen will display the sensor data.

Notes:

  • For early magnet-activated sensors, place the magnet over the stem, then place the i-TPMS alongside the valve stem.
  • If the TPMS sensor requires tire deflation (e.g., 10PSI), deflate the tire and place the i-TPMS alongside the stem while pressing the OK button.

8.2.2. Program Sensor

This function allows you to program sensor data to specific brand sensors, replacing faulty or low-battery sensors. There are four programming options:

Programming TPMS sensors with the device
Figure 8.3: Sensor Programming

Note: Do not place the device close to several sensors at the same time, as this may result in programming failure.

Method 1: Auto Create

Programs a new random sensor ID based on the test vehicle when the original sensor ID is unavailable.

  1. Select the wheel to be programmed, insert a sensor into the i-TPMS sensor slot, and tap 'Auto' to create a new random sensor ID.
  2. Tap 'Program' to write the new created sensor ID to the sensor.

Note: If 'Auto' is selected, a TPMS Relearn operation is required after programming all necessary sensors.

Method 2: Manual Create

Allows manual entry of a random or original sensor ID.

  1. Select the wheel to be programmed, insert a sensor into the i-TPMS sensor slot, and tap 'Manual'.
  2. Use the on-screen virtual keypad to input a random or original (if available) sensor ID and tap 'OK'. (Do not enter the same ID for each sensor.)
  3. Follow the on-screen prompts to write the sensor ID to the sensor.

Notes:

  • If a random ID is entered, perform the TPMS Relearn function after programming. If the original ID is entered, Relearn is not needed.
  • If a vehicle does not support the Learn function, select 'Manual' to enter the original sensor ID or trigger the original sensor at the activation screen to get its information before programming.
Method 3: Copy By Activation

Writes retrieved original sensor data to a specific brand sensor after the original sensor is triggered.

  1. From the activation screen, select the specific wheel position and trigger the original sensor. The information will be displayed on the screen.
  2. Insert a sensor into the i-TPMS sensor slot and tap 'Copy by Activation'.
  3. Tap 'Program' to write the copied sensor data to the sensor.

Note: Once programmed with 'Copy', the sensor can be installed directly in the wheel, and the TPMS warning light will turn off.

Method 4: Copy By OBD

Writes saved sensor information to the LAUNCH sensor after performing 'Read ECU ID'. This requires a connection to the vehicle's DLC port.

  1. Connect the tool to the vehicle's DLC port, tap 'Read ECU ID' to start reading sensor IDs and positions.
  2. Insert a new sensor into the i-TPMS sensor slot, select the desired wheel position, and tap 'Copy by OBD'.
  3. Tap 'Program' to write the copied sensor data to the sensor.

8.2.3. Relearning (Only available on diagnostic tool)

This function writes newly programmed sensor IDs into the vehicle's ECU for sensor recognition. Relearn is only needed when the newly programmed sensor IDs differ from the original IDs stored in the vehicle's ECU. There are three relearn methods:

TPMS relearn methods: OBD Relearn, Automatic Relearn, Stationary Relearn
Figure 8.4: TPMS Relearn Methods
Method 1: Static Learning

Requires the vehicle to be put into learning/retraining mode, then follow on-screen prompts.

Method 2: Self-Learning

For some vehicles, learning can be completed by driving. Refer to the on-screen learning steps.

Method 3: Relearn by OBD

Allows the diagnostic tool to write sensor IDs to the TPMS module. First, activate all sensors, then use the diagnostic tool with the included VCI to complete learning steps following on-screen instructions.

8.3. Full OBDII Functions

The LAUNCH Creader TPMS 5011 V2 provides complete OBDII diagnostic functions for OBDII-compliant vehicles.

List of full OBDII functions
Figure 8.5: Full OBDII Functions
  • Reading Codes: Displays detailed Diagnostic Trouble Codes (DTCs).
  • Erasing Codes & Reset: Turns off Check Engine Lights (MILs), clears codes, and resets monitors.
  • Data Stream: Reads and displays live ECU/PCM data stream, plots graphically, and stores freeze frame data.
  • I/M Readiness Status: Shows if emission-related systems are operating properly and ready for inspection.
  • Read Live Data Stream: Displays continuous data stream from a vehicle in live graphic (waveform) display.
  • View Freeze Frame Data: Checks vehicle conditions recorded by the on-board computer when an emission-related fault occurs.
  • O2 Sensor Test: Retrieves and views O2 sensor monitor test results.
  • On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components.
  • Read Vehicle Information: Displays VIN, CID, and CVN.
  • Component Test: Actuates certain vehicle components via scanner commands to test operability.

8.4. 12 Essential Maintenance Services

The device is equipped with 12 commonly used maintenance functions to meet daily needs.

Grid of 12 service functions
Figure 8.6: 12 Service Functions
  • Brake Reset: Resets the brake pad indicator light after replacing brake pads or sensors.
  • Oil Lamp Reset: Resets oil life systems after oil and oil filter changes.
  • Battery Reset: Resets the car battery monitoring unit after battery replacement.
  • SAS Calibration: Calibrates the steering angle and clears fault records after replacing the steering angle position sensor or steering system components.
  • ABS Bleeding: Bleeds the brake system to restore ABS braking sensitivity.
  • Throttle Reset: Initializes the throttle actuator to its default state.
  • DPF Regeneration: Clears particulate matter from the DPF filter through continuous combustion oxidation.
  • TPMS Service: Quickly searches for tire sensor ID from the vehicle ECU and performs TPMS replacement and sensor testing.
  • Injector Coding: Codes new fuel injector numbers after installation or replacement.
  • Sunroof Reset: Resets sunroof functions like closing on rainy days, slide/tilt memory, and outside temperature thresholds.
  • Seat Calibration: Calibrates memory in replaced or repaired seats.
  • Windows Calibration: Performs door window matching to recover ECU initial memory.

9. Maintenance

9.1. Software Updates

The LAUNCH X431 Creader TPMS 5011 V2 supports lifetime free updates via Wi-Fi. To update the device:

  1. Ensure the device is connected to a stable Wi-Fi network.
  2. Navigate to the 'Upgrade' section on the device menu.
  3. Follow the on-screen prompts to download and install the latest software versions.
Online feedback screen showing software version
Figure 9.1: Online Feedback/Update Screen

9.2. Cleaning and Storage

  • Keep the device dry, clean, and free from oil, water, or grease.
  • Use a mild detergent on a clean cloth to clean the outside of the device when necessary.
  • Store the device within the recommended storage temperature range (-20°C ~ 60°C).

10. Troubleshooting

This section addresses common issues you might encounter with your i-TPMS device.

10.1. Frequently Asked Questions

Q: Why does my i-TPMS always stay on the welcome screen?
A: If the device keeps displaying the welcome screen, it indicates that it is not in TPMS function mode. If the diagnostic tool is performing the TPMS function, the device will switch to the corresponding function mode.
Q: Can I set the system language of my i-TPMS?
A: It varies with the system language of the diagnostic tool/smartphone that connects it. Currently, only English and Simplified Chinese are available on the device. If the device detects the system language of the diagnostic tool/smartphone is non-Chinese, it will automatically change to English.
Q: My i-TPMS does not respond.
A: Check the following:
  • Whether the device is successfully connected to the diagnostic tool/smartphone wirelessly.
  • Whether the device is powered on.
  • Whether the device is damaged or defective.
Q: Why does my i-TPMS automatically power off?
A: Check the following:
  • Whether the device is fully discharged.
  • If the device is not being charged and there is no operation for 30 minutes, it will automatically power off to conserve battery power.
Q: My i-TPMS cannot trigger a sensor.
A: Check the following:
  • Whether the device is damaged or defective.
  • Whether the sensor, module, or ECU itself may be damaged or defective.
  • The vehicle may not have a sensor, even if a metal valve stem is present (be aware of Schrader rubber style snap-in stems).
  • Your device may require a firmware upgrade.
Q: What to do if my i-TPMS encountered some unexpected bugs?
A: A firmware upgrade is required. On the TPMS version selection screen, tap 'Firmware Update' to upgrade it.

11. User Tips

  • Keep Updated: Regularly update the device firmware via Wi-Fi to ensure optimal performance and access to the latest features and vehicle coverage.
  • Verify Shipping: If purchasing online, confirm fast shipping with the seller to avoid delays, as some users have experienced.
  • Versatility: While primarily a TPMS tool, remember its versatility with 12 additional service options for broader vehicle maintenance.
  • Check Package: Upon receipt, verify all included accessories against the packing list.

12. Specifications

For detailed technical specifications, please refer to Section 4: Technical Parameters.

Comparison table showing efficiency and coverage
Figure 12.1: Efficiency and Coverage

The LAUNCH X431 Creader TPMS 5011 V2 boasts a sensor replacement efficiency increased by about 70% and is compatible with over 99% of vehicles on the market.

13. Warranty & Support

For warranty information and technical support, please refer to the official LAUNCH website or contact your authorized dealer. Keep your purchase receipt as proof of purchase for warranty claims.

A comprehensive user manual in PDF format is available for download from the manufacturer's website or can be accessed via the following link: LAUNCH X431 Creader TPMS 5011 V2 User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.