Micmol SOLO APP Controlled Bluetooth Full Spectrum LED Lighting User Manual

1. Introduction

The Micmol SOLO is an advanced APP-controlled Bluetooth full spectrum LED lighting system designed for optimal growth and health of freshwater planted aquariums. Featuring a Space Aluminum Unibody Design, this light offers a perfect spectrum with six bands and a dimmable controller, ensuring a vibrant environment for your aquatic plants and fish.

2. Package Contents

Before proceeding with installation, please verify that all items listed below are present in your package:

• 1 x SOLO Lamp
• 1 x Clip Bracket
• 1 x Power Adapter
• 1 x Dimmer Controller
• 1 x Printed Instructions

3. Setup Instructions

3.1 Choosing a Stand

The Micmol SOLO comes standard with a Clip Stand. An Extension Stand is available as an optional accessory for different aquarium setups.

3.2 Installation Steps

Follow these steps to install your Micmol SOLO LED light:

1. Assemble the Stand: Depending on your chosen stand, assemble it according to the visual guide below. Ensure all connections are secure.
2. Attach the Lamp: Carefully attach the SOLO Lamp unit to the assembled stand. The lamp unit can be rotated for optimal light positioning.
3. Position on Aquarium: Place the Clip Stand securely on the edge of your aquarium. If using the Extension Stand, place the base on a stable surface next to or behind your aquarium.
4. Connect Power: Connect the power adapter to the lamp unit and then plug it into a suitable power outlet.

3.3 Initial Power-Up

Once installed and powered, the light will turn on. You can then proceed to connect it via the iMicMol APP for full control.

4. Operating Instructions

4.1 iMicMol APP Controller

The Micmol SOLO is controlled via the iMicMol APP, available for both iOS and Android devices. This app allows for easy connection and comprehensive control over your lighting system.

1. Download the App: Search for 'iMicMol' on the Apple App Store or Google Play Store and install it on your smartphone or tablet.
2. Connect via Bluetooth: Open the iMicMol app and follow the on-screen instructions to connect to your Micmol SOLO light via Bluetooth.
3. Set Lighting Parameters: The app features a user-friendly interface to quickly set your desired lighting.

4.2 Lighting Modes and Channels

The iMicMol app offers various modes and 4 channels for diverse lighting settings:

• Auto Mode: Pre-programmed lighting cycles for convenience.
• Manual Mode: Allows for custom adjustment of each channel's intensity.
• Special Effects: Includes Lunar, Lightning, and Cloudy settings to simulate natural conditions.

These rich settings provide powerful control to optimize the lighting for your aquarium's specific needs.

4.3 Product Overview Video

For a visual guide on assembly and features, please watch the official product video:

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your Micmol SOLO LED light.

• Cleaning: Gently wipe the LED unit and stand with a soft, damp cloth to remove dust and water spots. Avoid using abrasive cleaners or solvents, as these can damage the finish or electronic components.
• Power Cord Inspection: Periodically check the power cord and adapter for any signs of damage, fraying, or loose connections.
• Ventilation: Ensure the light unit's ventilation areas are clear of obstructions to prevent overheating.

6. Troubleshooting

If you encounter issues with your Micmol SOLO, refer to the following common problems and solutions:

6.1 Light Not Turning On

• Check Power Connection: Ensure the power adapter is securely plugged into both the light unit and a working electrical outlet.
• Test Outlet: Plug another device into the same outlet to confirm it is receiving power.
• Inspect Power Adapter: Look for any visible damage to the power adapter or cable.

6.2 App Connectivity Issues

• Bluetooth Enabled: Verify that Bluetooth is enabled on your smartphone or tablet.
• App Permissions: Ensure the iMicMol app has the necessary Bluetooth permissions on your device.
• Restart App/Device: Close and reopen the iMicMol app, or restart your mobile device.
• Power Cycle Light: Unplug the Micmol SOLO light from the power outlet, wait 10 seconds, and plug it back in. Then attempt to reconnect via the app.
• Proximity: Ensure your mobile device is within close range of the Micmol SOLO light for a stable Bluetooth connection.

6.3 Inconsistent Light Output

• Check App Settings: Verify that the light intensity and mode settings in the iMicMol app are as desired.
• Clean LEDs: Dust or water residue on the LED surface can affect light output. Clean the LEDs gently as described in the Maintenance section.

7. Specifications

7.1 LED Array (Planted Version)

• 18pcs Deep Red (660nm) CHA
• 8pcs Royal Blue (440nm) CHB
• 6pcs White (6500K) CHC
• 4pcs Warm White (3500K) CHB
• 8pcs Green (520nm) CHC
• 2pcs UV (380nm) CHC

7.2 LED Array (Marine Version)

• 28pcs Royal Blue (440nm) CHA+B
• 2pcs Deep Red (660nm) CHC
• 2pcs White (6500K) CHC
• 2pcs Warm White (3500K) CHC
• 2pcs Green (520nm) CHC
• 2pcs UV (380nm) CHC

8. User Tips

• App Control is Key: For the best experience and full customization, always use the iMicMol app. It unlocks the full potential of the light's spectrum and modes.
• Optimal Placement: Experiment with the light's height and angle using the adjustable stand to achieve the best coverage and intensity for your specific aquarium plants.
• Gradual Changes: When adjusting light intensity or duration, make gradual changes to avoid stressing your aquatic plants and fish.

9. Warranty and Support

For warranty information, technical support, or further inquiries, please visit the official Micmol website at www.micmol.com. You may also refer to the contact information provided with your purchase for direct assistance.