1. Introduction and Overview
The ME901 is a smart WiFi wireless thermostat designed for efficient control of floor heating systems. This low-power consumption device features an intuitive LCD display and offers flexible temperature management through weekly programming. It supports control via a wireless remote, a dedicated mobile application, and can also be operated manually. The thermostat allows for setting up to 6 distinct periods each day with varying temperature preferences, optimizing comfort and energy usage.
Key features include:
- Smart WiFi wireless connectivity
- Large LCD display for clear information
- Weekly programmable with 6 periods per day
- Supports comfort, economy, party, holiday, and program modes
- Control via mobile app and wireless remote
- Voice control compatibility with Amazon Alexa, Google Assistant, and IFTTT
- Internal and external sensor capabilities


2. Setup and Installation
2.1 Component Identification
The ME901 system consists of two main components: the Thermostat Display Unit and the Wireless Receiver Unit.

2.2 Power Supply
- Thermostat Display Unit: Requires 2 x No. 7 (AAA) batteries. Insert them into the battery compartment on the rear of the unit.
- Wireless Receiver Unit: Connects directly to AC230V, 50/60Hz power supply.
2.3 Wiring Diagram for Wireless Receiver
The wireless receiver unit must be wired to your floor heating system. It typically connects to the power supply and the heating actuator. Consult a qualified electrician for installation if you are unsure.

2.4 Pairing the Thermostat and Receiver
To establish communication between the thermostat and the receiver:
- Ensure both the thermostat and receiver are powered on.
- Locate the "Pair Code" button on the wireless receiver unit (refer to Figure 2).
- Press and hold the "Pair Code" button on the receiver until its indicator light starts flashing, indicating it's in pairing mode.
- Follow the specific pairing instructions on your thermostat display unit or refer to the quick start guide for detailed steps to initiate pairing from the thermostat side.
- Once successfully paired, the indicator light on the receiver will stop flashing and remain solid, and the thermostat display will show a connection icon (e.g., WiFi symbol).
3. Operating Instructions
3.1 Basic Controls and Display
The large LCD screen displays essential information such as current time, day, set temperature, room temperature, and heating status. Use the physical buttons on the thermostat to navigate menus and adjust settings.

3.2 Operating Modes
The thermostat supports various operating modes to suit your needs:
- Comfort Mode: Maintains a consistent, preferred temperature.
- Economy Mode: Sets a lower temperature to save energy.
- Party Mode: Allows for temporary temperature adjustments for social gatherings.
- Holiday Mode: Sets a reduced temperature for extended periods when the home is unoccupied.
- Program Mode: Follows a pre-set weekly schedule.
- Manual Control: Allows direct adjustment of the temperature, overriding any programmed schedule until the next scheduled event or manual change.
3.3 Weekly Programming
The ME901 offers 5+1+1 weekly programming, meaning you can set different schedules for weekdays (Monday-Friday), Saturday, and Sunday. Each day can have up to 6 distinct time periods with individual temperature settings. Refer to the thermostat's on-screen menu for detailed programming steps.
3.4 Mobile App Control
Control your thermostat remotely using the dedicated mobile application. This allows you to adjust settings, change modes, and monitor temperatures from anywhere with an internet connection.

3.5 Voice Control
Integrate your ME901 thermostat with smart home assistants like Amazon Alexa, Google Assistant, and IFTTT for convenient voice control. This feature allows you to adjust your heating hands-free.

4. Maintenance
- Cleaning: Wipe the thermostat and receiver units with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: Replace the 2 x No. 7 (AAA) batteries in the thermostat display unit when the low battery indicator appears on the screen. Ensure correct polarity.
- Firmware Updates: Periodically check the mobile application for any available firmware updates for your thermostat to ensure optimal performance and access to new features.
5. Troubleshooting
If you encounter issues with your ME901 thermostat, try the following:
- No Display/Power:
- Check batteries in the thermostat display unit and replace if necessary.
- Ensure the wireless receiver unit is properly connected to the AC230V power supply.
- No Heating:
- Verify the thermostat is set to a temperature higher than the current room temperature.
- Check if the receiver unit's "Heating on" indicator is lit.
- Ensure the thermostat and receiver are properly paired. Re-pair if necessary.
- Inspect wiring connections to the heating system (consult an electrician if unsure).
- App Control Issues:
- Ensure your home WiFi network is active and the thermostat is connected.
- Check your smartphone's internet connection.
- Restart the mobile application.
- If issues persist, try re-connecting the thermostat to your WiFi network via the app.
- Inaccurate Temperature Reading:
- Ensure the thermostat is not exposed to direct sunlight, drafts, or heat sources that could affect its internal sensor.
- If an external sensor is used, ensure it is correctly installed and positioned.
For persistent issues, contact customer support or consult a professional.
6. Specifications
| Feature | Specification |
|---|---|
| Model Number | ME901 |
| Type | Floor Heating Thermostat |
| Power Supply (Thermostat) | 2 pcs No.7 battery |
| Power Supply (Wireless Receiver) | AC230V, 50/60Hz |
| Consumption | <1.5W |
| Accuracy | -1~1℃ |
| Load Current | 3A |
| Temperature Setting Range | 5-90℃ |
| Wireless Frequency | 868MHZ/433MHZ |
| Wireless Transmission Distance | 100~200m in open area |
| Dimensions (H/W/D) | 87.5/135/23.3mm (Thermostat) |
| Certification | CE |
| Application | Hotel, Household |
| Design Style | Modern |
7. User Tips
No specific user tips were available from provided reviews or Q&A. General tips for smart thermostats include:
- Optimal Placement: Place the thermostat in a central location away from direct sunlight, drafts, or heat-emitting appliances for accurate temperature readings.
- Energy Saving: Utilize the weekly programming and economy mode to optimize heating schedules and save energy when you are away or asleep.
- App Familiarity: Spend some time exploring the mobile application's features to fully leverage the smart capabilities of your thermostat.
8. Warranty and Support
This product comes with a 2-year warranty from the date of sale.
For technical assistance, troubleshooting, or warranty claims, please contact customer support. Services include online technical support, return, and replacement options.
