1. Introduction
The AVATTO WT598-1T1 is a smart WiFi thermostat designed for intelligent temperature control of water and gas boilers. It features an RF433 wireless receiver for reliable communication and can be controlled via a rotatable knob, a mobile application (Tuya Smart/Smart Life), or voice commands through Amazon Alexa, Google Home, and Yandex Alice. This thermostat offers programmable scheduling, precise temperature management, and a user-friendly interface to enhance your home comfort and energy efficiency.


2. Setup
2.1. Package Contents
Please ensure all components are present:
- AVATTO Smart Thermostat (Control Panel)
- RF433 Wireless Receiver
- Mounting accessories (screws, anchors - not explicitly shown but implied for wall mount)
- User Manual (this document)
2.2. Power Supply
The thermostat control panel can be powered by two methods:
- Type-C Port Power Supply: Connect a standard Type-C USB cable to the port on the back of the control panel.
- Battery Power Supply: Insert 3 AAA alkaline batteries (LR03) into the battery compartment on the back of the control panel.

2.3. Installation Methods
The thermostat control panel offers flexible installation options:
- Desktop Placement: Use the included stand to place the thermostat on any flat surface.
- Wall Mount: Securely mount the thermostat to a wall using appropriate screws and anchors. Ensure the mounting location allows for optimal temperature sensing and accessibility.

2.4. Wiring Instructions (Receiver)
The RF433 wireless receiver must be wired to your boiler system. It is highly recommended that a qualified electrician performs this installation.
- Power Connection: Connect the 110-220V power supply to the receiver (terminals L and N).
- Boiler Connection: Connect the boiler control wires to the appropriate terminals on the receiver.
- Actuator/Pump Connection: If using actuators or a pump, connect them to the designated NO (Normally Open), NC (Normally Close), COM (Common Terminal), or M (Pump) terminals as required by your system.


Terminal Definitions:
| Terminal | Description |
|---|---|
| N | Neutral |
| L | Live |
| M | Pump |
| NO | Normally Open |
| COM | Common Terminal |
| NC | Normally Close |
| NO1 | Normally Open 1 |
| NC1 | Normally Close 1 |
Remark: Some boilers may require connecting COM and NC terminals. Always refer to your boiler's specific wiring manual for detailed instructions.
2.5. App Pairing
Download the 'Tuya Smart' or 'Smart Life' app from your smartphone's app store. Follow the in-app instructions to add your AVATTO Smart Thermostat and connect it to your home WiFi network. This will enable remote control and advanced features.

3. Operating Instructions
3.1. Display Overview
The thermostat's display provides essential information and status indicators:

- Lock: Indicates Child Lock is active.
- Week: Current day of the week.
- Time: Current time.
- Cooling mode: Indicates cooling function is active (if supported by boiler).
- Room Temp: Current ambient room temperature.
- Manual mode: Thermostat is operating in manual mode.
- Auto mode: Thermostat is operating based on programmed schedule.
- RF: RF433 wireless signal strength.
- WiFi: WiFi connection status.
- Heating mode: Indicates heating function is active.
- Battery status: Current battery level.
- Equipment at work: Indicates boiler/heating system is active.
- Set temperature: Desired temperature setting.
- Time period: Current programmed time period.
3.2. Basic Controls
- Rotatable Knob: Turn the knob to adjust the set temperature or navigate through settings.
- Touch Buttons: Use the touch-sensitive buttons on the display for mode selection, menu access, and confirmation.
3.3. Operating Modes
The thermostat supports three main operating modes:

- Manual Mode: Allows you to set a constant temperature that the thermostat will maintain until changed.
- Auto Mode (Program Mode): Follows a pre-set schedule for temperature changes throughout the day and week.
- Temporary Mode: Temporarily overrides the current mode (Manual or Auto) to a new set temperature for a specified duration, after which it reverts to the previous mode.
3.4. Programming Mode
The thermostat supports flexible programming schedules:
- Weekly Programs: Choose between 5+2 (weekdays + weekend), 6+1 (weekdays + one weekend day), or 7-day programming.
- Daily Time-Modes: Set up to 6 distinct time periods per day with different temperature settings to optimize comfort and energy usage.

3.5. Voice Control
Integrate your thermostat with smart home assistants for convenient voice control:
- Amazon Alexa
- Google Home
- Yandex Alice
Example command: "Alexa, set the temperature to 22.5 degrees Celsius."

3.6. Child Lock
Activate the Child Lock feature to prevent unintended changes to settings, especially useful in households with children.

3.7. Temperature Calibration
If you notice a discrepancy between the thermostat's displayed temperature and the actual room temperature, you can calibrate it. The temperature calibration range is from -9.9°C to 9.9°C.

4. Maintenance
- Cleaning: Wipe the thermostat's surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: When the battery status indicator shows low power, replace the 3 AAA alkaline batteries in the control panel. Ensure correct polarity.
- Firmware Updates: Periodically check the Tuya Smart/Smart Life app for available firmware updates to ensure optimal performance and access to new features.
5. Troubleshooting
- Thermostat not powering on: Check battery installation (polarity, charge) or Type-C power cable connection.
- No WiFi connection: Ensure your home WiFi network is active and the thermostat is within range. Re-attempt pairing through the app.
- RF signal issues: Ensure the receiver is powered on and within range of the control panel. Obstructions can interfere with RF signals.
- Incorrect temperature readings: Use the temperature calibration feature in the app to adjust the reading if necessary.
- Boiler not responding: Verify the wiring connections to the receiver. Check the boiler's own power and status. Ensure the thermostat is in an active heating/cooling mode.
- No heating/cooling function: Check if the thermostat is set to the correct mode (heating or cooling, if applicable to your boiler system). Some boilers may only support heating.
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | WT598-1T1 |
| Brand Name | AVATTO |
| Power Supply | 3*AAA Alkaline Battery (LR03) / Type-C Port |
| Certification | CE |
| Origin | Mainland China |
| Name | Smart Thermostat |
| Type | Intelligent temperature control |
| Features | Smart Electric Water Gas Boiler, Remote operation, WiFi wireless constant temperature, RF 433 Wireless Receiver, Easy to install |
| APP Compatibility | Smart Life / Tuya Smart |
| Voice Control | Alexa, Google Home, Yandex Alice |
| Protection Level | IP20 |
| Temperature Sensor | NTC |
| Working Temperature | -10°C ~ 40°C |
| Temperature Precision | ±1°C |
| Control Temperature Range | 5°C ~ 35°C |
| Temperature Hysteresis | 0.5°C ~ 10°C |
| Minimum Temperature Setting | 0.5°C |
| Control Panel Dimensions | 13.3cm x 8.6cm x 4.8cm (5.24in x 3.39in x 1.89in) |
| Receiver Dimensions | 9.5cm x 8.6cm x 2.8cm (3.74in x 3.39in x 1.12in) |


7. User Tips
- Heating/Cooling Functionality: While the thermostat display shows icons for both heating and cooling, its actual functionality (e.g., summer/winter mode) depends on the capabilities of your connected boiler system. Most boiler systems are primarily for heating. Consult your boiler's manual to understand its operational modes.
- Optimal Placement: For accurate temperature readings, place the thermostat in a central location away from direct sunlight, drafts, or heat sources.
- Battery Life: To maximize battery life, consider using the Type-C power supply option if available.
8. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.