Introduction
The OLOPKY Mix400 Pro is an ultra-low noise 4-channel stereo line mixer designed for professional and enthusiast audio applications. It allows you to combine audio signals from various sources such as microphones, instruments, and playback devices into a single output. Featuring independent volume control for each channel, a robust full-metal housing, and customizable RGB lighting effects, the Mix400 Pro delivers high-quality sound and versatile functionality for home recording, live streaming, music creation, and audio production.

Product Features
- 4-Channel Stereo Line Mixer: Combines audio from up to four sources into a single stereo output.
- Ultra-Low Noise Design: Optimized circuit design ensures clear signal transmission and minimizes background noise.
- Independent Volume Control: Each of the four input channels has its own volume knob for precise level adjustment.
- Master Output Control: A dedicated knob controls the overall output volume.
- Mono/Stereo Switch: Each channel features a switch to select between mono or stereo input.
- Multiple Input Sources: Compatible with various devices including speakers, microphones, pianos, guitars, and basses.
- RGB Lighting Effects: Features a light knob with 10,000 colors and 7 switchable light effects for visual customization.
- Durable Construction: Housed in a full-metal casing for even heat dissipation and rust resistance.
- Type-C Power Interface: Convenient Type-C port for power supply.
- 6.35mm Audio Interfaces: Standard 6.35mm (1/4 inch) jacks for all inputs and outputs.

Setup Guide
1. Unpacking and Inspection
- Carefully unpack the Mix400 Pro mixer and all accessories.
- Verify that all items listed in the "Package Contents" section are present.
- Inspect the unit for any signs of physical damage. If damage is found, contact customer support immediately.
2. Component Identification

- Indicator Light: Shows power status.
- Power Switch: Turns the unit on/off.
- Mono/Stereo Switch Button: Selects input mode for each channel.
- Volume Control (Level 1-4): Adjusts individual channel input levels.
- Master Volume Control (Output): Adjusts the overall output level.
- Ground Wire Terminal (GND): For connecting a ground wire if needed to reduce hum.
- Type-C Interface (DC5V): Power input port.
- 6.35mm Output Connector: Main audio output.
- 6.35mm Input Connectors (Input 1-4): Individual audio input channels.
3. Power Connection
- Ensure the power switch on the Mix400 Pro is in the "OFF" position.
- Connect the provided power adapter to the Type-C interface (DC5V) on the rear panel of the mixer.
- Plug the power adapter into a suitable electrical outlet (AC110V/AC220V, depending on your region and adapter type).
- Turn the power switch to "ON". The indicator light should illuminate.
4. Audio Connections

- Input Devices: Connect your audio sources (e.g., microphones, guitars, keyboards, media players) to the INPUT 1-4 jacks on the rear panel using 6.35mm (1/4 inch) TS or TRS cables.

Understanding TS (Mono) and TRS (Stereo) input/output connections. - Output Device: Connect the OUTPUT jack on the rear panel to your amplifier, powered speakers, or recording interface using a 6.35mm (1/4 inch) cable.
- Grounding (Optional): If you experience hum or noise, connect a ground wire from the GND terminal to a suitable ground point in your audio setup.
Operating Instructions
1. Power On/Off
- To power on, flip the power switch to the "ON" position. The red indicator light will illuminate.
- To power off, flip the power switch to the "OFF" position. The indicator light will turn off.
2. Adjusting Volume Levels

- Individual Channel Volume: Use the "LEVEL 1" through "LEVEL 4" knobs to adjust the volume of each connected input source independently. Start with these knobs at a low setting and gradually increase them.
- Master Output Volume: Use the "OUTPUT" knob to control the overall volume of the mixed signal. Adjust this knob to achieve the desired listening or recording level.
- Gain Staging: It is recommended to set the individual channel volumes to a healthy level (not clipping) before adjusting the master output. This ensures optimal signal-to-noise ratio.
3. Mono/Stereo Input Selection
- Each input channel (1-4) has a switch to select between MONO and STEREO input modes.
- If your input source is mono (e.g., a single microphone or guitar), set the switch to MONO.
- If your input source is stereo (e.g., a keyboard with left/right outputs, or a media player), set the switch to STEREO. Note that for stereo input, you would typically use two channels on the mixer, one for left and one for right, or a single TRS cable if the device supports it. The diagram shows a single TRS input for stereo.
4. RGB Lighting Effects

- The mixer features an RGB light strip around the master output knob.
- This light strip can be switched between 7 different light effects to enhance your studio or performance environment.
- Refer to the product's specific controls (if any are present beyond the image) for changing these effects.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the mixer. Do not use liquid cleaners or solvents, as they may damage the finish or internal components.
- Storage: When not in use for extended periods, store the mixer in a cool, dry place away from direct sunlight and extreme temperatures.
- Cable Management: Ensure all cables are neatly organized and not under strain to prevent damage to the connectors or the mixer's ports.
- Ventilation: The full metal housing is designed for heat dissipation. Ensure the mixer is placed in a location with adequate airflow and not covered, to prevent overheating.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound output |
|
|
| Humming or buzzing noise |
|
|
| Distorted sound |
|
|
| RGB light not working |
|
|
Specifications
| Feature | Detail |
|---|---|
| Model | MIX400 Pro |
| Brand | OLOPKY |
| Channels | 4-Channel Stereo Line Mixer |
| Audio Interface | 6.35mm (1/4 inch) Input/Output |
| Power Supply Interface | Type-C (DC 5V) |
| Maximum Power Per Channel | No Power (Line Mixer) |
| Volume Adjustment | Independent for each channel, plus master output |
| RGB Lighting | Yes, with 7 light effects |
| Material | Aluminum Alloy (Full Metal Housing) |
| Product Dimensions (L x W x H) | 108mm x 76mm x 22mm (approx. 4.25 in x 2.99 in x 1.25 in) |
| Net Weight | 250g (approx. 0.55 lbs) |
| Certification | CE |

User Tips
- Start Low: Always begin with all volume knobs (individual channels and master output) at their lowest setting before powering on or connecting new devices. Gradually increase levels to avoid sudden loud noises or damage to equipment.
- Cable Quality: Using high-quality, shielded 6.35mm (1/4 inch) cables can significantly reduce noise and improve sound clarity, especially in complex setups.
- Power Source: Ensure you use the provided power adapter or a compatible 5V Type-C power source to prevent damage to the unit.
- Experiment with Mono/Stereo: Depending on your input source, experiment with the MONO/STEREO switch on each channel to achieve the best sound. For instruments with a single output, MONO is usually appropriate.
- Grounding for Noise: If you encounter persistent hum, try connecting the GND terminal to a known good ground point in your audio system.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact details provided by your retailer or the manufacturer's official website. Keep your purchase receipt as proof of purchase for any warranty claims.