Introduction
Thank you for choosing the HOMCOM Beige Natural Rattan Backrest Armrest Lounge Chair. This manual provides essential information for the safe assembly, operation, maintenance, and care of your new lounge chair. Please read these instructions thoroughly before assembly and retain them for future reference.

Figure 1: HOMCOM Beige Natural Rattan Backrest Armrest Lounge Chair in a home environment.
Setup and Assembly
This lounge chair requires self-assembly. Please ensure all parts are present and undamaged before beginning. Assembly is straightforward with the included illustrated instructions.
Package Contents:
- Chair frame components (rubber wood)
- Rattan backrest panel
- Seat cushion (beige synthetic linen)
- Armrest components
- Assembly hardware (screws, washers, Allen key)
- Instruction manual
Tools Required:
- Included Allen key
- Phillips head screwdriver (recommended, not always included)
Assembly Steps:
- Unpack all components and lay them out on a clean, soft surface to prevent scratching.
- Identify all parts against the parts list in the included manual.
- Attach the side frames (including armrests) to the seat frame using the provided screws. Do not fully tighten screws until all components are loosely assembled.
- Secure the rattan backrest panel to the assembled frame.
- Attach the remaining legs to the frame, ensuring they are stable and aligned.
- Once all components are in place, gradually tighten all screws until secure. Avoid over-tightening.
- Place the seat cushion onto the chair.
- Verify the chair is stable and all connections are firm before use.

Figure 2: Detail of a frame connection point, indicating assembly.
Operating Instructions
The HOMCOM lounge chair is designed for comfortable seating and relaxation in indoor environments. Its ergonomic design and natural materials contribute to a welcoming atmosphere.
Design and Comfort Features:
- Bohemian Style: The natural rattan backrest and rubber wood frame provide a relaxed, exotic, and natural aesthetic.
- Wide Seat Depth: Offers ample space for comfortable seating.
- Slightly Inclined Backrest: Designed to support a natural, relaxed back posture.
- Wide Armrests: Provide comfortable support for your arms.
- High-Density Foam Cushion: A 5 cm thick cushion (28D density) ensures plush comfort.
- Linen-Touch Fabric: Upholstered with 230g/m² synthetic linen (100% polyester) for excellent ventilation and temperature regulation.
Ensure the chair is placed on a flat, stable surface before use. Avoid standing on the chair or using it as a step stool. The maximum load capacity is 120 kg.

Figure 3: Visual representation of the chair's bohemian style, cane back, and wooden legs.

Figure 4: Details on cushion thickness, fabric, and armrests for enhanced comfort.
Maintenance and Care
Proper care will extend the life and appearance of your lounge chair.
General Care:
- Regularly check and tighten all screws and fasteners to ensure stability.
- Avoid exposing the chair to direct sunlight or extreme humidity, which can damage the wood and rattan.
- Do not place hot items directly on the wooden surfaces.
- Keep sharp objects away from the fabric and rattan to prevent tears or damage.
Cleaning Instructions:
- Wood Frame: Wipe clean with a soft, damp cloth. Dry immediately with a clean, dry cloth. Avoid abrasive cleaners.
- Rattan Backrest: Gently dust with a soft brush or vacuum with a brush attachment. For spills, wipe immediately with a damp cloth and dry thoroughly.
- Fabric Cushion (Synthetic Linen): Spot clean with a mild detergent and a damp cloth. Blot dry. Do not machine wash or tumble dry the cushion cover unless specifically indicated on a care label.
Troubleshooting
Here are solutions to common issues you might encounter:
Chair Wobbles:
- Ensure the chair is on a flat, even surface.
- Check all assembly screws and tighten them evenly. Sometimes loosening all screws slightly, sitting on the chair to level it, and then re-tightening can resolve wobbling.
Creaking Noises:
- Creaking often indicates loose connections. Re-tighten all screws.
- If creaking persists, disassemble the affected joint, apply a small amount of wood glue (if appropriate for the joint type and material), and reassemble.
Cushion Appears Flat:
- Rotate and flip the cushion regularly to ensure even wear.
- Fluff the cushion by hand to redistribute the foam filling.
Specifications

Figure 5: Detailed dimensions of the lounge chair.
| Feature | Detail |
|---|---|
| Model Number | 839-183 |
| Color | Wood, Beige |
| Materials | Rubber wood, Natural rattan, Synthetic linen (100% polyester), Foam (28D density) |
| Overall Dimensions (L x W x H) | 63 cm x 69 cm x 78 cm |
| Seat Dimensions (L x W x H) | 52 cm x 52 cm x 13 cm |
| Seat Height | 48 cm |
| Backrest Dimensions (L x W x H) | 51 cm x 3 cm x 36 cm |
| Armrest Dimensions (L x W) | 58.5 cm x 6 cm |
| Armrest Height (from seat) | 16 cm |
| Maximum Load Capacity | 120 kg |
User Tips
While no specific user reviews or Q&A were provided, here are some general tips for maximizing your experience with the HOMCOM lounge chair:
- Placement: Consider placing the chair in a cozy corner with a small side table and a reading lamp to create a perfect relaxation spot.
- Decor: The bohemian and natural aesthetic of the chair makes it ideal for combining with indoor plants, soft throws, and decorative pillows to enhance its inviting feel.
- Floor Protection: If placing on delicate flooring, consider adding felt pads to the bottom of the chair legs to prevent scratches.
Warranty and Support
For any questions regarding assembly, missing parts, or product defects, please contact the retailer or HOMCOM customer support directly. Please have your model number (839-183) and proof of purchase ready when contacting support.
Specific warranty details may vary by region and retailer. Refer to your purchase documentation for warranty information.