AIFEN A902PRO

Contents

AIFEN A902PRO Double Station Soldering Rework Station User Manual

Model: A902PRO | Brand: AIFEN

1. Introduction

The AIFEN A902PRO is a high-performance double station soldering rework station designed for precision work on cell phone PCBs and ICs. Featuring 450W of power and compatibility with C115, C210, and C245 soldering tips, it offers independent operation for two users or simultaneous use of different tip types. This manual provides essential information for safe and effective use of your A902PRO soldering station.

Product demonstration video showcasing features and operation.

2. Safety Information

Please read and understand all safety instructions before operating the AIFEN A902PRO soldering station. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • Electrical Safety: Ensure the station is connected to a properly grounded power outlet. Do not operate with wet hands or in damp environments.
  • Heat Hazard: Soldering tips and handles reach very high temperatures. Always use caution to avoid burns. Allow tips to cool completely before handling or storing.
  • Fumes: Soldering produces fumes. Always work in a well-ventilated area or use a fume extractor to prevent inhalation of harmful vapors.
  • Eye Protection: Always wear safety glasses or goggles to protect your eyes from solder splashes and fumes.
  • Work Area: Keep your work area clean and free of flammable materials. Ensure the station is placed on a stable, heat-resistant surface.
  • Children and Pets: Keep the soldering station out of reach of children and pets.
  • Maintenance: Disconnect power before performing any maintenance or changing accessories.

3. Package Contents

Verify that all items are present in your package:

  • AIFEN A902PRO Host Unit
  • Soldering Handles (210/245 type)
  • Soldering Tips (C115, C210, C245 compatible, typically 6 standard tips included)
  • Ground Wire
  • Power Cord
  • Hub (for cable management)
  • Operation Instructions Manual
  • Certificate of Conformity
  • Warranty Card
AIFEN A902 Pro Soldering Station with two handles and features listed

The AIFEN A902 Pro Soldering Station, highlighting its dual station design and key features.

4. Product Features

The AIFEN A902PRO is equipped with advanced features for efficient and precise soldering:

  • Double Station Design: Allows for completely independent use of two soldering handles simultaneously, or by two different users.
  • High Power Output: 450W for rapid heating and stable temperature recovery.
  • Wide Tip Compatibility: Supports C115, C210, and C245 series soldering tips.
  • Memory Function: Two groups of memory settings for fixed temperature display, allowing quick recall of preferred settings.
  • Anti-splash Tin Design: Integrated design to minimize solder splashing during use.
  • Anti-wash Board Water Coating: Provides protection against water damage to the internal components.
  • Multi-angle Adjustable Bracket: Ergonomic design for comfortable and flexible handle positioning.
  • Stainless Steel Puller: Facilitates safe and easy removal and insertion of soldering tips.
  • Accurate Temperature Control: Button adjustments for precise temperature settings.
  • Soldering Tips Storage Hole: Convenient storage for frequently used tips.
Detailed diagram of AIFEN A902 Pro components and controls

Diagram illustrating the various components and control buttons of the AIFEN A902PRO.

5. Setup Instructions

Follow these steps to set up your AIFEN A902PRO soldering station:

  1. Unpack: Carefully remove all components from the packaging.
  2. Placement: Place the A902PRO host unit on a stable, heat-resistant, and well-ventilated workbench.
  3. Power Connection: Connect the power cord to the station's power input and then to a grounded electrical outlet of the correct voltage (110V or 220V, depending on your model).
  4. Ground Wire: Connect the ground wire to the designated terminal on the station and to a reliable ground point in your work area.
  5. Handle Connection: Plug the soldering handles into the respective ports (A and B) on the station.
  6. Tip Installation: Using the stainless steel puller, carefully insert the desired soldering tip into the handle. Ensure it is seated firmly.
  7. Adjust Brackets: Adjust the multi-angle adjustable brackets to your preferred working position.
  8. Cleaning Materials: Place the cleaning sponge (dampened) and copper wire/brush into their designated cleaning areas.
AIFEN A902 Pro with hand adjusting multi-angle adjustable bracket

Adjusting the multi-angle adjustable bracket for optimal ergonomics.

6. Operating Instructions

Operating the AIFEN A902PRO is straightforward:

  1. Power On: Press the power button to turn on the station. The display will show the current temperature settings.
  2. Temperature Setting:
    • Select the desired channel (CH1 or CH2) for the handle you wish to adjust.
    • Use the UP (^) and DOWN (v) arrow buttons to increase or decrease the temperature.
    • Press the 'SET' button to confirm the temperature or to cycle through preset memory settings.
    • The station features two independent memory groups for each channel (A and B), allowing for quick switching between frequently used temperatures.
  3. Independent A/B Area Control: The A902PRO allows independent control of each soldering area. You can turn ON/OFF each area separately to meet various operational needs.
  4. Changing Soldering Tips:
    • Ensure the tip is cool or use the stainless steel puller to safely remove the hot tip.
    • Insert the new tip firmly into the handle.
    • The station is compatible with C115, C210, and C245 tips.
  5. Cleaning Tips: Regularly clean the soldering tip using the damp sponge or the copper wire/brush provided in the cleaning areas. This helps maintain tip performance and longevity.
  6. Power Off: When finished, press the power button to turn off the station. Allow tips to cool before storing.
Close-up of AIFEN A902 Pro display and tip cleaning area

Close-up view of the AIFEN A902PRO display and anti-splash tin design in the cleaning area.

AIFEN A902 Pro demonstrating the use of the stainless steel puller

Using the stainless steel puller for safe and easy tip changes.

7. Maintenance

Proper maintenance ensures the longevity and optimal performance of your soldering station:

  • Tip Cleaning: Always clean soldering tips before and after use. Use the damp sponge to wipe off excess solder and the copper wire/brush to remove stubborn residue.
  • Station Cleaning: Wipe the exterior of the station with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Replace Consumables: Replace the cleaning sponge and copper wire/brush when they become worn or heavily soiled.
  • Storage: Store the soldering station in a dry, dust-free environment when not in use. Ensure all tips are removed and cooled before storage.
  • Inspection: Periodically inspect the power cord, handle cables, and connections for any signs of damage. Do not use if any damage is found.

8. Troubleshooting

If you encounter issues with your AIFEN A902PRO, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Station does not power onPower cord disconnected, faulty outlet, power switch offCheck power cord connection, try a different outlet, ensure power switch is ON.
Soldering tip not heatingTip not properly installed, faulty handle connection, incorrect temperature settingEnsure tip is fully inserted, check handle cable connection, verify temperature setting is above ambient.
Temperature unstable or fluctuatingLoose tip connection, worn-out tip, environmental factorsRe-seat the tip, replace the tip if worn, ensure stable ambient temperature.
Solder not melting easilyInsufficient temperature, oxidized tip, incorrect tip for applicationIncrease temperature, clean or re-tin the tip, use a tip suitable for the task.

9. Specifications

FeatureDetail
BrandAIFEN
Model NumberA902PRO
OriginMainland China
Power450W
Voltage110V / 220V (selectable)
Compatible TipsC115, C210, C245
CertificationsCE, RoHS, WEEE
Product Dimensions (L x W x H)24.5 cm x 14.3 cm x 15.4 cm (main unit)
Total Height (with antennas)23.5 cm
Product Weight1.52 KG
Package Weight1.95 KG
Diagram illustrating the dimensions and weight of the AIFEN A902 Pro Soldering Station

Dimensions and weight of the AIFEN A902PRO Soldering Station.

10. User Tips

  • Voltage Selection: Ensure you select the correct voltage (110V or 220V) when purchasing to match your region's power supply.
  • Tip Variety: Experiment with different C115, C210, and C245 tips to find the best fit for various soldering tasks, especially for intricate cell phone and IC repairs.
  • Pre-tinning: Always pre-tin new soldering tips to ensure optimal heat transfer and prevent oxidation.
Image showing various soldering tips and two handles

Various soldering tips and handles compatible with the AIFEN A902PRO.

11. Warranty and Support

Your AIFEN A902PRO Soldering Rework Station comes with certain guarantees to ensure your satisfaction:

  • Free Returns: Enjoy free returns within 90 days of purchase.
  • Delivery Guarantee: In case of delayed delivery, a coupon code may be provided. Refunds are available if the package is lost, items are damaged, or if delivery is not completed within 30 days.

For any technical assistance, warranty claims, or further inquiries, please contact the seller or authorized service center. Refer to the included Warranty Card for specific terms and conditions.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.