Introduction
This manual provides essential instructions for the safe and effective use of your BIUBLE Jump Starter Car Battery Booster Pack. Please read this manual thoroughly before operating the device and retain it for future reference. This powerful and versatile device is designed to jump start 12V vehicles, charge electronic devices, and provide emergency lighting.

Image: BIUBLE Jump Starter unit with smart jumper cables and charging adapter.
Safety Information
Always observe the following safety precautions to prevent injury or damage to the device and vehicle:
- Read all instructions before use.
- Do not operate the jump starter if it is damaged or has been dropped.
- Keep out of reach of children.
- Do not short-circuit the jumper clamps.
- Ensure proper polarity connection to the vehicle battery (red clamp to positive, black clamp to negative). The device features built-in reverse polarity protection.
- Do not expose the device to extreme temperatures (above 60°C / 140°F or below -20°C / -4°F), direct sunlight, or moisture.
- Do not attempt to jump start a frozen battery.
- Remove the jump starter from the vehicle battery within 30 seconds after the vehicle starts.
- Use only the provided smart jumper cables and charging accessories.

Image: The jump starter unit emphasizing its Spark Proof and Reverse Polarity Protection features.
Package Contents
Verify that all items are present in your package:
- BIUBLE Jump Starter Unit
- Smart Jumper Cables with Clamps
- USB Charging Cable (Type-C)
- User Manual
Product Overview
The BIUBLE Jump Starter is a compact and powerful device designed for emergency vehicle starting and portable power needs.
Key Features:
- High Peak Current: Up to 3000A for reliable starting.
- Vehicle Compatibility: Designed for 12V vehicles, including cars, trucks, SUVs, motorcycles, and boats with up to 7.0L gas or 5.5L diesel engines.
- Smart Jumper Cables: Equipped with reverse polarity protection and spark-proof technology for safe operation.
- Power Bank Function: Features USB 3.0, USB 2.0, and Type-C ports for fast charging of mobile phones, tablets, and other electronic devices.
- LED Emergency Light: Integrated LED light with multiple modes (Lighting, SOS, Strobe, Warning) for various situations.
- Durable Design: Robust construction for outdoor and emergency use.

Image: Heavy-duty smart jumper cables with reverse polarity protection and operation indicator.

Image: The jump starter unit displaying its USB 3.0, USB 2.0, and Type-C fast charging ports.
Specifications
| Feature | Specification |
|---|---|
| Peak Current | 3000A |
| Output Voltage | 12V |
| Battery Capacity | > 30000 mAh |
| Conversion Rate | > 90% |
| Number of Built-in Batteries | 2 |
| Engine Compatibility | Up to 7.0L Gas / 5.5L Diesel |
| USB Output | USB 3.0, USB 2.0, Type-C (Fast Charge) |
| Certifications | ROHS, FCC, CE, UL |

Image: Vehicle compatibility chart for the jump starter, showing support for 7.0L Gas and 5.5L Diesel engines.
Setup
Charging the Jump Starter:
Before first use, fully charge the jump starter. It is recommended to fully charge the unit every 3-6 months to maintain battery health.
- Connect the provided USB charging cable to the Type-C input port on the jump starter.
- Connect the other end of the USB cable to a suitable USB wall adapter (not always included) or a powered USB port.
- The LED indicator lights on the jump starter will illuminate to show the charging progress. All lights will be solid when fully charged.
Operating Instructions
1. Jump Starting a Vehicle:
Ensure the jump starter is fully charged before attempting to jump start a vehicle.
- Insert Jumper Cable: Firmly insert the blue plug of the smart jumper cable into the 12V jump start port on the jump starter unit. Ensure a secure connection.
- Connect Clamps:
- Connect the RED (+) clamp to the positive (+) terminal of the vehicle's battery.
- Connect the BLACK (-) clamp to the negative (-) terminal of the vehicle's battery.
- Start Vehicle: Once the smart clamp indicator is green, start your vehicle's engine.
- Remove Cables: As soon as the vehicle starts, immediately remove the jumper clamps from the vehicle battery, then disconnect the smart jumper cable from the jump starter unit.

Image: Step-by-step visual guide for jump starting a vehicle.
2. Using as a Portable Power Bank:
The jump starter can charge various electronic devices.
- Connect your device's charging cable to one of the available USB output ports (USB 3.0, USB 2.0, or Type-C) on the jump starter.
- The jump starter will automatically begin charging your device.
- Monitor the charge level of your device and disconnect when fully charged.
3. Using the LED Emergency Light:
The built-in LED light offers multiple modes for different emergency situations.
- Press and hold the power button for a few seconds to turn on the LED light (Lighting mode).
- Press the power button briefly to cycle through the modes: Lighting → SOS → Strobe → Warning.
- Press and hold the power button again to turn off the LED light.

Image: Diagram illustrating the four LED light functions: Lighting, SOS, Strobe, and Warning.
Maintenance
- Recharge Regularly: To prolong the lifespan of the internal battery, fully recharge the jump starter every 3-6 months, even if not in use.
- Cleanliness: Keep the unit and clamps clean and free of dust, dirt, and moisture. Use a dry, soft cloth for cleaning.
- Storage: Store the jump starter in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure it is stored with a partial charge.
- Cable Inspection: Periodically inspect the jumper cables and clamps for any signs of damage, wear, or corrosion. Replace if necessary.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Vehicle does not start | Jump starter battery is low. Incorrect clamp connection. Vehicle battery is severely damaged. | Recharge the jump starter. Check clamp connections (red to +, black to -). Ensure smart clamp indicator is green. Consult a mechanic. |
| Smart clamp indicator is red/flashing | Reverse polarity connection. Short circuit. Vehicle battery voltage too low. | Disconnect and reconnect clamps with correct polarity. Check for any metal touching both clamps. Try again after a few minutes, or if persistent, the vehicle battery might be beyond jump-starting. |
| Jump starter not charging devices | Jump starter battery is low. Cable or device issue. | Recharge the jump starter. Try a different USB cable or device to isolate the problem. |
| LED light not working | Jump starter battery is low. Button not pressed correctly. | Recharge the jump starter. Press and hold the power button for a few seconds to activate. |
User Tips
- Always keep your jump starter charged, especially before long trips or during cold weather.
- For optimal performance, ensure the jump starter is at room temperature before use. Cold temperatures can reduce battery efficiency.
- After jump starting, allow your vehicle to run for at least 15-20 minutes to recharge its own battery.
- If your vehicle doesn't start after 2-3 attempts, stop and investigate the underlying issue. Continuous attempts can damage the jump starter or vehicle.
Warranty and Support
For warranty information or technical support, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.