1. Product Overview
The EWIND M-95A Dual-Band WiFi Repeater is designed to extend your existing wireless network coverage, eliminating Wi-Fi dead zones in areas like kitchens, bathrooms, bedrooms, yards, or garages. It supports both 2.4GHz and 5GHz bands, offering a combined wireless speed of up to 1200Mbps.


2. Package Contents
- 1x EWIND M-95A WiFi Extender
- 1x User Manual (English)

3. Setup Guide
3.1 Initial Power-On and Indicator Lights
- Plug the WiFi Repeater into a power outlet.
- Wait for approximately 13 seconds for the device to power on.
- The first indicator light (Power LED) will illuminate, indicating the device is powered on.
3.2 Connecting and Configuration (Repeater Mode)
Follow these steps to set up your WiFi Repeater in Repeater Mode using a mobile phone:
- Take out your mobile phone and open its settings.
- Turn on Wi-Fi.
- In the list of available Wi-Fi networks, look for a signal starting with "WIFI_CE3B46" or "Repeater-XXXXXX" (where XXXXXX are the last 6 digits of the repeater's MAC address).
- Connect to this network. Your phone should automatically enter the settings screen for the repeater.
- On the settings interface, select "Trunk Mode" (Repeater Mode) and click "Next".
- The repeater will scan for nearby Wi-Fi networks. Once the list appears, select the Wi-Fi network you wish to extend.
- Enter the password for your selected Wi-Fi network.
- (Optional) If you wish to change the name of the expanded Wi-Fi network, check the box provided and enter a new name. If left unchecked, the expanded network name will be the original name with an "_ext" suffix.
- Click "Next" and then "Complete Configuration".
- Wait for approximately 30 seconds for the device to restart. During this time, the indicator lights will flash and then stabilize.
- Once the restart is complete, you will be able to find and connect to your newly configured expanded Wi-Fi network using the password you entered.

4. Operating Modes
The EWIND M-95A WiFi Repeater supports two main operating modes:
4.1 Repeater Mode (Wireless Signal Extender)
In this mode, the device extends your existing Wi-Fi signal wirelessly, reducing wiring troubles and expanding coverage to hard-to-reach areas. It can also extend your Wi-Fi signal with a cable, connecting your device and extender stably.


4.2 AP Mode (Wired Signal Extender / Access Point)
Use this mode to get better Wi-Fi speed by connecting the router and the extender with a network cable in areas with poor Wi-Fi signal. This effectively turns the repeater into a wired access point.

5. Maintenance
5.1 Resetting the Device
If you need to reset the device to its factory default settings, locate the reset button on the side of the device. With the repeater powered on, use a pin or a similar pointed object to press and hold the Reset button for about 8 seconds. The power indicator light will flash rapidly, indicating the reset process has begun. Once the power light stabilizes, the reset is complete, and you can reconfigure the device.

6. Troubleshooting (FAQ)
Q1: What should I do if I cannot access the Repeater's web management page?
- Make sure your computer or mobile device is connected to the extended network.
- Ensure your device is set to obtain an IP address automatically (DHCP).
- If the Repeater is connected to your main router, check your router's DHCP client list to find the Repeater's current IP address.
- If issues persist, reset the Repeater to factory defaults and try again.
Q2: Why does the wireless transmission rate slow down even when the wireless signal is stronger after being repeated?
In compliance with wireless transmission protocols, Repeater devices typically operate in half-duplex mode. This means the Repeater processes one-way communication at a time between your root Wireless router (or AP) and the terminal clients. This can effectively double the transmission time and decrease speed. It is recommended to use the extender when your home network connection is poor, or when you primarily need a larger wireless coverage to eliminate "dead zones" rather than maximum speed.
Q3: Why can't devices connected to the Repeater get an IP address or access the Internet?
- Check if you have enabled a wireless MAC filter, wireless access control, or an Access Control List (ACL) on your main router. If so, log into your router and disable these features.
- Ensure the Repeater has successfully connected to your main router. If not, reset the Repeater and reconfigure it.
- It's possible that the IP address range of the router is fully utilized, or the number of wireless devices connected to the router has reached its limit. Try rebooting your main router, then reset and reconfigure the Repeater.
7. Specifications
| Feature | Specification |
|---|---|
| Product Type | 5G & 2.4G 1200M WIFI Repeater / 2.4G 300M WIFI Repeater |
| Color | White |
| Plug Type | EU plug or US plug |
| Voltage | AC 110-240V |
| Wireless Security | WPA/WPA2, WPA/WPA-PSK2 encryptions |
| Antenna Type | Fixed, 2dBi omnidirectional antennas (4 total) |
| Networks | Wireless 2.4G and 5G |
| LAN Port | 1 x 10/100Mbps RJ45 Ethernet port |
| WAN Ports | 1 x 10/100Mbps |
| Wi-Fi Standard | IEEE 802.11n/g/b, IEEE 802.11ac, IEEE 802.11a |
| Wireless Transmission Rate | 1200Mbps (Combined) |
| 5G Wi-Fi Transmission Rate | Up to 867Mbps (11ac) / Up to 54Mbps (11a) |
| 2.4G Wi-Fi Transmission Rate | Up to 300Mbps (11n) / Up to 54Mbps (11g) / Up to 11Mbps (11b) |
| Wi-Fi Supported Frequency | 2.4G & 5G (Dual-Band) |
| Supports WPS | Yes |
| Supports WDS | No |
| Function | Firewall |
| Application | Home |
| With Modem Function | No |
| Certification | CE |
| Package Dimensions (L x W x H) | 15cm x 15cm x 10cm |
| Package Weight | 0.18 kg |



8. User Tips
- The passwords for your repeater are the same as your main router's Wi-Fi password.
- If you experience slow speeds or dropped connections, it might be due to a poor signal connection between the repeater and your main router.
- If you don't see your desired wireless network during setup, try moving the range extender closer to your main router and scanning again, as it might be out of range.
- For optimal performance, ensure the repeater is placed in a central location between your router and the area needing extended coverage.
9. Warranty and Support
For detailed warranty information and further technical support, please refer to the official product documentation or contact the seller directly. A comprehensive user manual in PDF format is available for download: User Manual (PDF).