Jessinie STM32H743XIH6, FK743M4-XIH6, FK743M5-XIH6

Contents

STM32H743XIH6 Development Board Module User Manual

Models: STM32H743XIH6, FK743M4-XIH6, FK743M5-XIH6

1. Product Overview

This manual provides essential information for the safe and effective use of the Jessinie STM32H743XIH6, FK743M4-XIH6, and FK743M5-XIH6 Core System Learning STM32 Development Board Modules. These modules are compatible with OpenMV and LCD displays, designed for learning and development purposes.

Overview of FK743M4-XIH6 and FK743M5-XIH6 development boards with an STM32H743IIT6 chip.
Figure 1: Overview of the FK743M4-XIH6 and FK743M5-XIH6 development boards, alongside an STM32H743IIT6 chip.

Product Information

  • Product Name: STM32H743XIH6 STM32H743 FK743M4-XIH6 FK743M5-XIH6 Core System Learning STM32 Development Board Module Compatible with OpenMV LCD
  • Model: STM32H743XIH6, FK743M4-XIH6, FK743M5-XIH6
  • Batch/Serial Number: 1005008125910683
  • Brand: Jessinie

2. Safety & Warnings

Read all instructions carefully before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.

3. Setup and Installation

3.1. Pre-Installation Considerations

Prior to integration, ensure that the operational environment aligns with specified technical parameters. It is recommended to verify compatibility with existing systems to facilitate seamless implementation.

3.2. Installation Process

Follow established procedures for component placement and connection. Proper handling is essential to maintain integrity and prevent potential performance degradation.

The development board modules are designed for easy integration. When connecting components like LCDs or programmers, ensure correct pin orientation. Refer to the wiring diagrams below for specific connections.

Assembly of FK743M2 board with RGB043M2 LCD and ST-LINK/V2 programmer connected.
Figure 2: Example assembly of an FK743M2 board with an RGB043M2 LCD and ST-LINK/V2 programmer.

3.3. Wiring Diagrams

Detailed wiring for power (3V3, GND, DIO, CLK) and USB power input on the development board.
Figure 3: Power wiring for the development board. Power can be supplied via USB or the 5V and GND pins.
Detailed wiring for ST-LINK/V2 programmer connection (VDD, SWDIO, SWCLK, GND) to the development board.
Figure 4: Wiring for ST-LINK/V2 Programmer connection. Ensure correct pin mapping: VDD (PIN1) RED, SWDIO (PIN7) GREEN, SWCLK (PIN9) PURPLE, GND (PIN20) BLACK.

3.4. Assembly Video

Video 1: Product overview and assembly demonstration.

4. Operating Notes

During use, maintain conditions within the prescribed ranges. Continuous monitoring of performance indicators is advised to sustain operational excellence.

The product is designed and manufactured in accordance with industry-standard specifications to ensure optimal performance and reliability. Users are expected to adhere to the following guidelines to maximize component functionality and service life.

5. Maintenance & Care

Implement routine maintenance protocols to uphold product standards. Periodic inspections are encouraged to ensure ongoing compliance with quality expectations. Store the module in a dry place and keep it away from children.

6. Troubleshooting

If you encounter issues, first verify all connections are secure and correctly oriented according to the diagrams in Section 3.3. Ensure the power supply meets the specified voltage requirements.

For complex issues, consult the official documentation or contact the support team. The manufacturer assumes no liability for outcomes resulting from non-compliance with these instructions, improper use, or unauthorized modifications.

7. Specifications

Attribute Value
Brand Name Jessinie
Type Voltage Regulator
Application Computer
Condition New
Origin Mainland China
Package Module
Dissipation Power low
Supply Voltage - (Not specified, typically 3.3V/5V via USB)
Operating Temperature normal
Is Customized Yes
High-concerned chemical None
Package Dimensions (L x W x H) 10 cm x 10 cm x 1 cm
Package Weight 0.185 kg

Module Dimensions

  • FK743M4-XIH6: 71mm x 38mm
  • FK743M5-XIH6: 72mm x 41mm
FK743M4-XIH6 development board with dimensions 71mm x 38mm.
Figure 5: FK743M4-XIH6 Development Board Dimensions.
FK743M5-XIH6 development board with dimensions 72mm x 41mm.
Figure 6: FK743M5-XIH6 Development Board Dimensions.

8. User Tips

  • FFC Connector Orientation: The display module's FFC connector may not have pin 1 clearly marked. Exercise caution and refer to diagrams to ensure correct orientation to prevent accidental damage. The dedicated STM32 modules from the same manufacturer often include additional resistors on several lines, providing some protection against reverse connection.
  • Mounting Plate Alignment: If using a mounting plate, be aware that the holes may not perfectly align with the development board. Minor adjustments or alternative mounting solutions might be necessary.
  • Documentation: Comprehensive documentation, including schematics, may be available in PDF format from the seller. It is recommended to review these resources for detailed technical information and examples.

9. Compliance Information

CE Marking

This product conforms to the following EU Directives:

  • 2014/35/EU (Low Voltage Directive)
  • 2014/30/EU (Electromagnetic Compatibility Directive)

RoHS Declaration

This product is in compliance with Directive 2011/65/EU and its amendment (EU) 2015/863, concerning the restriction of hazardous substances (Pb, Cd, Hg, etc.) in electrical and electronic equipment.

10. Manufacturer & Support

Manufacturer

  • Company Name: Shenzhen ZhengYi Electronic Technology Co., Ltd
  • Full Address: Jia An Road XA 41 D3-6F, Bao An District, ShenZhen, Guangdong Province, China
  • Email: 1020636662@qq.com

EU Authorized Representative

  • Company Name: eVatmaster Consulting GmbH
  • Full Address: Raiffeisen Street2 B11, 63110 Rodgau, Hessen, Germany
  • Email: contact@evatmaster.com

For further details or support, consult the official documentation or contact the support team directly.

© 2024 Jessinie. All rights reserved. Specifications are subject to change without prior notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.