1. Introduction
This manual provides detailed instructions for the safe and efficient operation of your SUSWE SU700 Variable Frequency Drive (VFD). The SU700 series is designed for precise motor speed regulation, offering a compact and user-friendly solution. It effectively converts single-phase 220V input to three-phase 380V output, making it ideal for applications where industrial three-phase 380V power is unavailable or when rewiring a motor to 220V is not feasible. The product comes with technical support and a 2-year warranty, ensuring reliability and peace of mind.

Figure 1.1: SUSWE SU700 VFD Frequency Converter
2. Safety Instructions
- High Voltage Warning: This device operates with high voltage. Always ensure the power supply is completely disconnected before performing any installation, maintenance, or troubleshooting. Wait at least 5 minutes after power-off for internal capacitors to discharge. The unit displays a 'DANGER 5 min' warning.
- Professional Installation: All installation and wiring procedures must be carried out by qualified and experienced personnel to prevent electric shock, equipment damage, or personal injury.
- Proper Grounding: The VFD must be securely and correctly grounded to prevent electrical hazards and ensure safe operation.
- Environmental Conditions: Install the VFD in a clean, dry, and well-ventilated area. Avoid locations exposed to direct sunlight, excessive dust, corrosive gases, or flammable materials. Ensure adequate clearance for heat dissipation.
3. Product Features
- Precise Motor Speed Regulation: Offers fine-tuned control over connected motor speeds.
- Input/Output Versatility: Designed to convert single-phase 220V input into three-phase 380V output.
- Compact and User-Friendly: Features a small footprint and an intuitive human-machine interactive button panel for ease of use.
- Certified Quality: Bears CE and FCC certifications, ensuring compliance with international safety and quality standards.
- Adaptable Design: Can be customized for specific applications, including conversion to a solar inverter. Please contact customer support for details on solar module replacement.
- Comprehensive Support: Backed by technical support and a 2-year warranty.
4. Specifications
4.1 General Specifications
| Attribute | Value |
|---|---|
| Brand Name | SUSWE |
| Model Series | SU700 (FK-700 series) |
| Type | DC/AC Inverter |
| Input Voltage | Single-phase 220V |
| Output Voltage | Three-phase 380V |
| Output Frequency | 50-60Hz |
| Output Power Range | 0.75KW - 22KW |
| Weight (11KW model) | 3.1kg |
| Dimensions (11KW model) | 240.5mm x 125mm x 166mm |
| Certification | CE, FCC |
| Origin | Mainland China |
| Customization | Yes |
4.2 FK-700 Series Index (Single Phase 220V Input to Three Phase 380V Output)

Figure 4.1: FK-700 Series Specifications Table
The table above provides detailed specifications for various models within the FK-700 series, specifically for single-phase 220V input converting to three-phase 380V output. It includes power capacity, rated input current, rated output current, and adapted motor power (KW/HP).

Figure 4.2: Product Certifications (CE, FCC, RoHS)
5. Installation and Wiring
5.1 Control Panel Overview

Figure 5.1: Control Panel Layout
The control panel features a digital display and various buttons for operation and programming:
- Display Screen: Shows frequency, current, and voltage.
- Knob: For adjusting parameters and speed.
- PRG (Programming Key): Enters programming mode.
- MFK (Multiple Use Key): Multi-functional key.
- Up/Down Arrows (Incremental/Decrement Keys): Navigates menus and adjusts values.
- ENTER Key: Confirms selections.
- RUN Key: Starts motor operation.
- STOP/REST Key: Stops motor operation and resets.
- Shift Key: Used for shifting digits during parameter entry.
- Indicators: Command, Operation, Forward/Reverse, Tuning/Fault.
5.2 Wiring Diagram

Figure 5.2: Terminal Wiring Diagram
The diagram illustrates the wiring method for the frequency converter. Ensure all connections are secure and correctly matched:
- Power Input (R, S, T): Connect your single-phase 220V power supply to the R and S terminals. Consult the full product manual for specific single-phase wiring configurations if needed. A circuit breaker should be installed upstream of the VFD input.
- Motor Output (U, V, W): Connect these terminals to your three-phase motor.
- Ground Wire: Connect the ground terminal to a reliable earth ground.
- Braking Resistance (P+, PB): Connect an external braking resistance if required for dynamic braking applications.
- Control Circuit Terminals: These include multifunctional digital inputs (X1-X4), high-speed pulse input (HDI), common (COM), analog inputs (AI1, AI2 for 0-10V/0-20mA), analog output (A01), open collector output (Y1), high-speed pulse output (HDO), relay outputs (K1A, K1B, K1C), and RS485 communication (A+, B-). A DC24V power supply is also available for control.
5.3 Detachable Operation Panel

Figure 5.3: Detachable Operation Panel
The operation panel is detachable for remote control or easier access. To remove it, press inward on the designated area and gently pull the panel away from the main unit. It can then be connected via an extension cable (not included) to a remote location.
6. Operation
Follow these steps for basic operation of the VFD:
- Power On: Ensure all wiring is correct and secure. Turn on the main power switch to supply single-phase 220V to the VFD.
- Start Motor: Press the RUN key on the control panel to initiate the motor's operation.
- Adjust Speed: Rotate the speed control knob on the panel to increase or decrease the motor's rotation speed. Observe the frequency display on the screen.
- Stop Motor: To stop the motor, press the STOP/REST key. The motor will decelerate and come to a stop.
- Power Off: Once the motor has completely stopped, pull down the main power switch to disconnect power from the VFD.
Video 6.1: Demonstration of VFD Motor Speed Control
7. Troubleshooting
If the VFD does not operate as expected, consider the following:
- Check Connections: Verify that all power and control wiring connections are secure, correct, and free from damage or corrosion.
- Power Supply: Ensure the input power supply voltage (single-phase 220V) is stable and within the VFD's specified operating range.
- Error Codes: If the display shows an error code, consult the full product manual for specific error definitions and troubleshooting steps.
- Motor Compatibility: Confirm that the connected motor's power rating is within the VFD's adapted motor range.
- Overload/Overheat: Check for any signs of motor overload or VFD overheating. Ensure proper ventilation.
For persistent issues that cannot be resolved with these basic checks, please contact technical support.
8. Maintenance
Regular maintenance helps ensure the longevity and optimal performance of your VFD:
- Regular Cleaning: Keep the VFD unit clean and free from dust, dirt, and debris. Dust accumulation can impede cooling and lead to overheating. Use a soft, dry cloth for cleaning.
- Inspect Connections: Periodically inspect all electrical connections, including power input, motor output, and control wiring, for tightness. Look for any signs of wear, fraying, or corrosion.
- Environmental Control: Ensure the operating environment consistently meets the specified temperature and humidity requirements. Extreme conditions can shorten the lifespan of electronic components.
- Ventilation Check: Verify that the VFD's cooling fans and vents are unobstructed and functioning correctly.
9. User Tips
- Power Selection Guidance: When selecting a VFD, if the motor power is relatively low, it is recommended to choose a VFD with one level higher power rating. For applications involving heavy motor loads, consider selecting a VFD with two levels higher power to ensure robust performance and extended operational life.
- Braking Unit Functionality: For smaller power frequency converters, the internal braking unit may be omitted to simplify wiring and prevent potential user errors. If your application specifically requires braking functionality, please contact customer service to discuss options or inquire about models with this feature.
- Solar Inverter Conversion: This VFD can be adapted for use as a solar inverter. If you are interested in this functionality, please reach out to customer service to arrange for the necessary solar module replacement and configuration.
- 220V Bi-phase to 380V Three-phase Applications: The SU700 VFD is well-suited for converting a 220V single-phase (or bi-phase, when correctly wired) power supply into a 380V three-phase output. This makes it a practical solution for powering equipment like 11kW electric car chargers in residential or commercial settings where a standard industrial three-phase 380V supply is not available.
10. Warranty and Support
Your SUSWE SU700 VFD Frequency Converter is covered by a 2-year warranty from the date of purchase.
For any technical assistance, operational queries, or warranty claims, please contact the seller's customer service. While response times may vary due to international time zone differences (e.g., 12-16 hours difference between Western Europe and the USA), all inquiries will be addressed within 24 hours.
We are committed to providing high-quality products and service. Each item is carefully checked before delivery. If you are not satisfied or encounter any issues, please contact us immediately. We will strive to resolve any problems to your satisfaction.

Figure 10.1: SUSWE Factory Environment

Figure 10.2: Product Packaging