1. Introduction
Thank you for choosing the Dongcheng Lithium Electric Angle Grinder, Model DCSM03-100. This powerful and versatile cordless tool is designed for efficient metal cutting, grinding, and polishing tasks. Its brushless motor ensures strong performance, long service life, and low maintenance. Please read this manual carefully before operation to ensure safe and effective use of the product.
2. Safety Information
Always wear appropriate personal protective equipment (PPE) including safety glasses, gloves, and hearing protection when operating the angle grinder. Ensure the workpiece is securely clamped. Keep hands clear of the rotating disc. Do not operate in damp conditions or near flammable materials. Disconnect the battery before changing accessories or performing maintenance.
3. Product Overview
Familiarize yourself with the components of your angle grinder:

Figure 1: Angle Grinder Components
- 20V Lithium Battery: Provides cordless power.
- Soft Rubber-Coated Handle: For comfortable and secure grip.
- Start Switch: Activates the tool.
- Shaft Lock: Used to secure the spindle for disc changes.
- Heat Dissipation Port: Ensures efficient cooling of the motor.
- Dustproof Seal: Protects internal components from dust and debris.
4. Setup
4.1 Battery Installation
- Ensure the battery is fully charged.
- Align the battery pack with the battery port on the tool handle.
- Slide the battery into place until it clicks securely.
4.2 Grinding Wheel / Cutting Disc Installation
- Ensure the tool is switched off and the battery is removed.
- Press and hold the shaft lock button to prevent the spindle from rotating.
- Use the provided wrench to loosen and remove the outer flange nut.
- Place the desired grinding wheel or cutting disc onto the inner flange, ensuring it is centered.
- Replace the outer flange nut and tighten it firmly with the wrench while holding the shaft lock button.

Figure 2: Safety Shaft Lock
4.3 Auxiliary Handle Attachment
Screw the auxiliary handle into one of the threaded holes on the gear housing. Ensure it is tightened securely for optimal control and safety during operation.
5. Operating Instructions
5.1 Powering On/Off
To start the grinder, press the start switch. To stop, release the switch. Some models may feature a lock-on button for continuous operation; press the switch, then the lock-on button, and release the switch. To turn off from lock-on, press and release the switch again.
5.2 Cutting and Grinding
The angle grinder is suitable for various tasks including metal cutting and grinding. The brushless motor provides strong power and efficient operation.

Figure 3: Metal Cutting Application

Figure 4: Metal Grinding Application

Figure 5: Wood Polishing Application
For optimal performance and safety:
- Always hold the tool firmly with both hands.
- Allow the disc to reach full speed before contacting the workpiece.
- Apply steady, even pressure. Do not force the tool.
- Maintain a proper angle for cutting or grinding as recommended for the specific disc type.
- Ensure proper ventilation and clear the work area of bystanders.
5.3 Operational Video
Video 1: Demonstrates the angle grinder in various cutting, grinding, and polishing applications, highlighting its brushless motor and quick disc change feature.
6. Maintenance
6.1 Cleaning
Regularly clean the tool, especially the heat dissipation ports and dustproof seal, to prevent overheating and maintain performance. Use a dry cloth or compressed air. Do not use solvents or abrasive cleaners.

Figure 6: Heat Dissipation and Dustproof Seal
6.2 Battery Care
Store batteries in a cool, dry place away from direct sunlight. Do not expose batteries to extreme temperatures. Charge batteries fully before storage and periodically during long periods of inactivity to prolong their lifespan.

Figure 7: 20V 4.0Ah Lithium Battery with Overcurrent Protection
6.3 Brushless Motor
The brushless motor design eliminates carbon brush loss, leading to lower maintenance requirements and a longer tool life compared to brushed motors.

Figure 8: Brushless Motor Performance Upgrade
7. Troubleshooting
- Tool does not start:
- Check if the battery is properly installed and charged.
- Ensure the start switch is fully engaged.
- Reduced power or overheating:
- Clean the heat dissipation ports to ensure proper airflow.
- Avoid applying excessive pressure during operation.
- Allow the tool to cool down if it becomes hot.
- Excessive vibration:
- Check if the grinding wheel/cutting disc is correctly installed and not damaged.
- Ensure the disc is suitable for the application.
8. Specifications
The following table outlines the key specifications for the DCSM03-100 angle grinder:
| Feature | Specification |
|---|---|
| Product Model | DCSM03-100 |
| Voltage | 20V |
| Battery Configuration (Bare Machine) | None |
| Battery Configuration (With 1 Battery) | 4.0Ah |
| Battery Configuration (With 2 Batteries) | 4.0Ah x 2 Group |
| Maximum Diameter of Grinding Wheel | 100mm |
| Grinding Wheel Aperture | Ø 16mm |
| Rated Speed | 8500 r/min |
| No-load Speed | 9000 rpm |
| Main Spindle Thread | M10 |
| Net Weight | 4.6 Kg |
| Wattage | 800W-999W |
| Certification | CE |
| Power Source | DC |
Note: Specifications may vary slightly depending on the specific package (bare tool vs. kit with batteries).

Figure 9: Specifications for DCSM03-100 (Bare Tool)

Figure 10: Specifications for DCSM03-100 (Kit with 2 Batteries)
9. Warranty and Support
For warranty information, please refer to the terms and conditions provided by your retailer or the manufacturer. Keep your purchase receipt as proof of purchase. For technical support or service inquiries, please contact the seller or an authorized service center.