1. Product Overview
The Staniot K300 is a wireless touch keypad designed to enhance your home security system. It features a stylish exterior, wireless connectivity, and a range of intelligent functions for convenient and secure operation. This keypad is intended to be used in conjunction with a compatible Staniot alarm host (e.g., Secpanel 3, Secpanel 5, Secpanel 7, Secpanel 7 Pro, SecCube 3).
Key Features:
- Wireless Touch Keypad
- Compatible with Staniot home security burglar alarm systems (GSM/4G)
- RFID Tag support for quick arm/disarm (2 RFID cards included)
- 433MHz Wireless Frequency
- Breathing backlight for enhanced visibility
- Multi-user codes (1 Admin, 3 User codes)
- Built-in 1500mAh lithium battery for extended operation
- Anti-dismantling alarm for tamper protection
- Doorbell button functionality
- Automatic wake-up via Microwave proximity sensor
- Automatic backlight adjustment via Light sensor

The Staniot K300 Keypad highlighting its main features: Doorbell, Backlight, RFID, Low Voltage Alert, and 1500mAh battery.

Visual representation of the keypad's key features.
2. Setup Instructions
2.1 Pairing with Alarm Panel
The K300 keypad must be paired with a compatible Staniot alarm host to function. Follow these steps to pair your keypad:
- On your Staniot alarm host, navigate to the 'Accessory' or 'Keypad' pairing menu.
- Select the option to add a new keypad. The alarm host will prompt you to 'Please trigger accessories'.
- On the K300 keypad, press the 'OK' (check mark) button. The keypad will emit a sound, and the alarm host should display 'Pair ok'.
- Confirm the pairing on the alarm host.
Video demonstrating the pairing process of the Staniot K300 Keypad with an alarm panel, followed by arming and disarming operations using both a code and an RFID tag.
2.2 Physical Installation
Choose a suitable location for your keypad, typically near an entry/exit point. Ensure it is within the wireless range of your alarm host (up to 100 meters in open space). The keypad can be mounted using screws or adhesive pads (not specified if included, assume standard mounting options).
2.3 Setting User Codes
The keypad supports one Admin code and up to three user codes. Refer to your Staniot alarm host's manual for detailed instructions on how to set and manage these codes, as code management is typically handled by the main alarm panel.
2.4 Adding RFID Tags
The keypad supports up to 10 RFID tags for quick arming and disarming. To add an RFID tag:
- Enter the programming mode on your alarm host (refer to your alarm host manual).
- Select the option to add an RFID tag.
- Tap the RFID tag against the RFID reader area on the K300 keypad. The alarm host will confirm the successful addition of the tag.

Quick and secure arming/disarming using an RFID tag.
3. Operating Instructions
3.1 Arming and Disarming
The K300 keypad allows for easy arming and disarming of your security system:
- Arm (Away Mode): Enter your user code and press the 'Arm' button (shield icon). The system will begin a countdown before fully arming.
- Arm (Home Mode): Enter your user code and press the 'Home' button (house icon). This arms specific zones while allowing movement in others.
- Disarm: Enter your user code and press the 'Disarm' button (unshielded icon). Alternatively, tap a registered RFID tag on the RFID reader area.

The keypad provides hassle-free arming and disarming for secure entry and exit.

The K300 Keypad seamlessly integrates with your Staniot alarm panel.

The keypad works wirelessly with your Staniot alarm panel.
3.2 Doorbell Function
The keypad features a doorbell button. When pressed, the connected alarm host will chime, alerting you to visitors.

The doorbell button on the keypad activates a chime on the alarm host.
3.3 Smart Sensors (Microwave Proximity & Light)
- Microwave Proximity Sensor: The keypad will automatically wake up and illuminate when a human body approaches within approximately 1 meter.
- Light Sensor: The keypad's backlight brightness will automatically adjust according to the ambient light conditions, ensuring optimal visibility and power saving.

The keypad features microwave proximity and light sensors for automatic wake-up and backlight adjustment.
4. Maintenance
4.1 Battery Charging
The K300 keypad has a built-in 1500mAh lithium battery. When the battery level is low, the keypad will provide a low voltage alert. Connect the keypad to a DC5V 1A power source using a compatible cable (not specified if included, assume standard micro-USB or USB-C) to recharge the battery.

The keypad is powered by a built-in 1500mAh battery for long-lasting performance.
4.2 Cleaning
To clean the keypad, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or spray directly onto the device, as this may damage the surface or internal components.
5. Troubleshooting
5.1 Anti-dismantling Alarm
If the keypad is tampered with or forcibly removed from its mounting location, the anti-dismantling alarm will trigger, sending an alert to your alarm host.

The anti-dismantling alarm provides an additional layer of security against tampering.
5.2 Pairing Issues ('Please trigger accessories')
If your alarm host displays 'Please trigger accessories' during pairing and the keypad does not respond, ensure the keypad is powered on and within range. Try pressing the 'OK' (check mark) button on the keypad again. If issues persist, try resetting the keypad (refer to your alarm host manual for accessory reset procedures) and re-attempt pairing.
5.3 Connectivity Problems
If the keypad is not communicating with the alarm host, check the following:
- Ensure both the keypad and alarm host are powered on.
- Verify the keypad is within the effective wireless range (up to 100 meters in open space). Walls and other obstructions can reduce this range.
- Check for any sources of wireless interference.
- Re-pair the keypad with the alarm host if necessary.
6. Specifications

Product dimensions: 135mm x 100mm.

Detailed product parameters for the Staniot K300 Keypad.
| Parameter | Value |
|---|---|
| Brand Name | staniot |
| Model Number | K300 |
| Smart Home Platform | Tuya |
| Power Supply | DC5V 1A |
| Built-in Battery | 3.7V 1500mAh lithium battery |
| Working Current | <10mA |
| Standby Current | <100uA |
| Relative Humidity | <95% (no condensation) |
| Wireless Parameters | 433MHz, eV1527 |
| Receiving Distance | 100 meters (open space) |
| Working Temperature | -10°C~50°C |
| Product Size | 135×100mm |
7. User Tips
- Multiple Keypads: The Staniot alarm system supports the use of multiple keypads. You can install more than one K300 keypad in different entry points or areas of your home for added convenience.
- RFID Tag Management: Keep your RFID tags secure. If a tag is lost or stolen, promptly remove it from your alarm host's registered devices to prevent unauthorized access.
- Battery Life: While the 1500mAh battery offers long life, regularly check the low voltage alert to ensure continuous operation. Consider a charging schedule to avoid unexpected power loss.
8. Warranty and Support
For further assistance, video guidelines, or warranty information, please visit the official Staniot YouTube channel or contact Staniot customer support.
Official YouTube Channel: https://www.youtube.com/channel/UC0omnisV9_rZOcGsSMH1hLQ