1. Product Overview
The Navceker ZY-SKD200 is an 8K DP USB 3.0 KVM Switch designed to control two computers or laptops using a single set of keyboard and mouse, while sharing two DisplayPort monitors and three USB 3.0 hub ports. This KVM switch enhances productivity by allowing seamless switching between workstations and helps maintain a tidy workspace.

Figure 1: Navceker 8K DP USB3.0 KVM Switch 2x2 with included accessories.
2. Key Features
- High-Definition Video: Freely switch high-definition video sources between two computers.
- DisplayPort 2.0: Compatible input and output ports, supporting resolutions up to 8K@60Hz, 4K@240Hz (DSC), 2K@360Hz, and 1080P@360Hz.
- Deep Color & EDID: Supports Deep Color and EDID adaptive technology.
- Plug & Play: No driver required for operation.
- USB Device Support: Connect USB devices such as keyboards, mice, U-disks, and printers via the integrated USB 3.0 hub.
- Switching Modes: Features both a physical button on the unit and a wired desktop remote control for switching.
- High Compatibility: Auto-matches source and display devices, compatible with Windows, macOS, Linux, UNIX, and other operating systems.
- Automatic Adjustment: Built-in system for smooth, clear, and stable image display.
- ESD Protection: Integrated ESD protection system.
- Separate Audio Output: Supports stereo audio output for microphones.
3. Package Contents
Please check the package for the following items:
- 1 x DP 2.0 KVM USB Switch (2x2)
- 1 x Desktop Controller (Wired Remote Switch)
- 2 x USB 3.0 Data Cables
- 1 x 5V Power Adapter
- 1 x User Manual (this document)

Figure 2: All items included in the package.
4. Setup Instructions
4.1. Hardware Requirements
- The computer graphics card must support a DisplayPort output interface.
- The monitor must have a DisplayPort input interface.
- DisplayPort cables with version 2.0 or higher are required. For optimal performance, use cables shorter than 1.5 meters.
4.2. Connection Diagram

Figure 3: Detailed connection diagram for the KVM switch. Connect all DP cables, USB cables, and power cables for optimal performance.
4.3. Connection Steps
- Power: Connect the 5V power adapter to the DC/5V port on the KVM switch.
- Monitors: Connect your two DisplayPort monitors to the 'DP OUT A' and 'DP OUT B' ports on the KVM switch using DisplayPort 2.0 cables.
- Computers (PC1 & PC2):
- For PC1: Connect its two DisplayPort outputs to 'DP IN 1 A' and 'DP IN 1 B' on the KVM switch. Connect a USB 3.0 data cable from PC1's USB port to 'USB IN 1' on the KVM switch.
- For PC2: Connect its two DisplayPort outputs to 'DP IN 2 A' and 'DP IN 2 B' on the KVM switch. Connect a USB 3.0 data cable from PC2's USB port to 'USB IN 2' on the KVM switch.
- Peripherals: Connect your USB keyboard, USB mouse, and other USB 3.0 devices (like a printer or U-disk) to the 'USB 3.0 OUT' ports on the KVM switch.
- Audio: Connect your microphone to the red audio jack and your headphones/speakers to the green audio jack on the front panel of the KVM switch.
- Remote Switch: Connect the desktop controller (wired remote switch) to the 'SWITCH' port on the KVM switch.
- Power On: Turn on the KVM switch using the ON/OFF button on the front panel.
5. Operating Instructions
5.1. Switching Between Computers
The KVM switch offers two methods for switching between connected computers:
- Physical Button: Press the '1' or '2' button on the front panel of the KVM switch to select the corresponding PC.
- Wired Remote Switch: Press the button on the desktop controller to cycle between PC1 and PC2.

Figure 4: Switching methods: Physical button on the unit and wired remote switch.
5.2. Display Modes
The KVM switch supports both Extended and Mirror (Duplicate) display modes, allowing for flexible screen configurations across your monitors.

Figure 5: Seamlessly switch between duplicate and extend modes for presentations or multitasking.
5.3. Initial Resolution Setting
Before debugging or if you encounter display issues, set your computer's resolution to 1080P or 720P. Once a stable image is displayed, you can adjust the resolution to your desired setting.
5.4. Laptop Extended Mode
If connecting a laptop to an external KVM switch and monitor, press WIN+P on your keyboard to bring up the extended display mode options.
6. Maintenance
To ensure the longevity and optimal performance of your Navceker KVM switch:
- Keep the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid exposing the device to water or other liquids.
- Clean the exterior with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Ensure all cables are securely connected but do not force them.
7. Troubleshooting
7.1. Common Pitfalls & Solutions

Figure 6: Guide to avoid common configuration pitfalls and solutions for non-dual DP computers.
- No Display/Flickering:
- Ensure each computer has two DisplayPort outputs.
- Verify your computer supports dual-screen mode and is set to dual-display.
- Check all 6 connections (DP cables, USB-A cables, power cord).
- For 8K@60Hz, use DP 1.4 or higher cables.
- Screen may go black for 3-5 seconds when switching as DP signals re-identify.
- If your monitor doesn't have DP ports, use appropriate adapters (e.g., DP-HDMI, DP-VGA).
- Using adapters, converter cables, or docking stations may cause compatibility issues. Contact support for compatible accessories.
- If experiencing flickering or display connection dropping out at high refresh rates (e.g., over 100Hz with HDR and VRR enabled), try reducing the refresh rate or disabling HDR/VRR to find a stable configuration.
- No Keyboard/Mouse Response:
- Ensure USB 3.0 data cables are securely connected from both PCs to the KVM switch.
- Try connecting the keyboard/mouse directly to the PC to confirm they are working.
- Restart the KVM switch and computers.
- Audio Issues:
- Ensure audio cables are correctly plugged into the KVM switch and your headset/speakers.
- Check audio output settings on your computer.
8. Specifications
| Category | Parameter | Description |
|---|---|---|
| Video | Standards | DisplayPort 2.0 |
| Resolution Range | Up to 8K@60Hz, 4K@240Hz, 2K@240Hz (depending on system and hardware) | |
| Maximum Data Rate | 40Gbps | |
| USB | Interface Protocols | USB 3.0 |
| PC Input | USB-A * 2 | |
| Output | USB-A * 3 | |
| General | Power Supply | DC 5V Power |
| Power Dissipation | MAX 2.5W | |
| Operating Temperature | -5°C ~ +70°C | |
| Operating Humidity | 5% ~ 90% | |
| Dimensions (L*W*H) | 120 * 65.5 * 19.2 mm |
9. User Tips
- Switching Delay: Note that without EDID emulation, there might be a 2-3 second delay each time you switch between computers as the display re-establishes connection.
- High Refresh Rate Stability: If you plan to use very high refresh rates (e.g., 150Hz+) with HDR and VRR enabled, be aware that some users have reported flickering or display connection drops. You may need to experiment with lower refresh rates or disable HDR/VRR to achieve stable performance.
- Cable Quality: Always use high-quality DisplayPort 2.0 cables, preferably shorter than 1.5 meters, to ensure signal stability, especially at higher resolutions and refresh rates.
10. Warranty and Support
This Navceker KVM switch comes with a one-year free warranty.
For technical support or any inquiries, please contact:
Email: support@lavstek.cn