Introduction
This manual provides detailed instructions for the proper use and maintenance of your Radtel RT-900 Two Way Radio. Please read this manual thoroughly before operating the device to ensure safe and efficient communication.
The Radtel RT-900 is an 8W full band ham radio walkie-talkie featuring 256 channels, air band reception, NOAA weather radio, VOX hands-free transmission, and Type-C fast charging. It is available in two versions: a Standard Version and a Bluetooth Version, with the latter offering app programming and noise reduction capabilities.

Figure 1: Radtel RT-900 with key features.
Product Overview
Radio Buttons & Knobs
The RT-900 features a user-friendly interface with clearly labeled buttons and knobs for easy operation.
- Channel Knob: Used to select channels.
- Power Knob: Controls the power on/off and volume.
- Indicator Light: Provides status indications.
- PTT Button: Push-to-Talk button for transmitting.
- PF2 Button: Short press to turn on FM RADIO; long press to switch High/Middle/Low power.
- PF3 Button: Short press to SEEK frequency from nearby radio; long press to open squelch.
- Numeric Keypad: For direct frequency input and menu navigation.
- VFO/MR Button: Switches between Channel Mode and Frequency Mode.
- OK Button: Confirms selections in menus.
- A/B Button: Switches between A/B bands.
- EXIT Button: Exits current menu or function.
- Type-C Charger Port: For charging the device.
- Headphone Jack: For connecting external audio accessories.
- Microphone Jack: For connecting external microphone accessories.
- Speaker: Audio output.

Figure 2: Radtel RT-900 physical features.
LCD Display and Menu Content
The RT-900 features a high-resolution color screen (1.77 inches) that displays channel number, frequency, and channel name. The display provides essential information for operation.

Figure 3: Large LCD Display.
Icon Description
| Icon | Description |
|---|---|
| CT | Analog Sub-audio Tone Indicator. |
| DCS | Digital Sub-audio Tone Indicator. |
| H | High Power Indicator. |
| M | Medium Power Indicator. |
| L | Low Power Indicator. |
| N | Narrowband Mode Indicator. |
| W | Wideband Mode Indicator. |
| + | Frequency Mode (+ Frequency Offset). |
| - | Frequency Mode (- Frequency Offset). |
| R | Frequency/Channel Mode Inverted Frequency. |
| T | Simplex Mode. |
| SC | SC (Encryption) Indicator. |
| AM | AM Modulation Indicator. |
| SCR | Scrambler Function. |
| VOX | VOX (Voice-Operated Transmission). |
| DW | Dual Standby. |
| MO | Monitor Function Enabled. |
| Side Tone Enabled. | |
| Keypad Lock. | |
| RSSI | Signal Strength. |
| AB | A/B Band. |
| VOL | Transmit Audio Volume. |
| Battery Status. |
Setup
Package Contents
Before starting, please ensure all items are present in the package:
- Radtel RT-900 Two Way Radio
- Antenna
- Rechargeable Battery
- Belt Clip
- USB Type-C Charging Cable
- Power Adapter (EU/US plug standard, depending on region)
- User Manual (this document)

Figure 4: Radtel RT-900 Package Contents.
Battery Installation and Charging
- Align the battery with the compartment on the back of the radio and slide it into place until it clicks securely.
- To charge the battery, connect the Type-C charging cable to the radio's Type-C port and the other end to the power adapter. Plug the adapter into a power outlet.
- The radio supports Type-C fast charging and offers 3-5 days of standby time.

Figure 5: Type-C Charging.
Antenna Attachment
Screw the antenna clockwise onto the connector at the top of the radio until it is finger-tight.
Bluetooth App Programming (Bluetooth Version Only)
For the Bluetooth version of the RT-900, you can program channels and settings via a mobile application. This feature also enables noise reduction.
- Download the official Radtel app for Android or iOS by scanning the QR codes provided below or visiting the specified URL for Android.
- Ensure Bluetooth is enabled on your mobile device and the RT-900.
- Follow the in-app instructions to connect and program your radio.

Figure 6: App Download QR Codes (Bluetooth Version Only).
Android App Download URL: https://radio-software.s3.amazonaws.com/kdh-RT-900-v1.0.0-2024-08-27.apk

Figure 7: Bluetooth Programming and Noise Cancellation.
Operating Instructions
Basic Operations
- Power On/Off: Rotate the Power Knob clockwise to turn on the radio. Rotate counter-clockwise to turn off.
- Volume Adjustment: Rotate the Power Knob to adjust the volume.
- Main Frequency Band Selection (A Band or B Band): On the standby screen, press the A/B key to select the main frequency. The frequency highlighted in blue indicates the main frequency, while those not highlighted in blue are secondary frequencies.
- PTT Function: When operating on the A band, press the PTT key to transmit on the A band frequency. When operating on the B band, press the PTT key to transmit on the B band frequency.
- AM Air Band Mode: Press VFO/MR to switch to frequency mode. Directly input the air band frequency within the range of 108 MHz to 136 MHz. The radio will automatically enter AM reception mode, and the channel status will display AM. This mode is primarily used to receive AM modulated signals.
Menu Function Operation
- Press the [MENU] key and use the UP/DOWN keys to select the desired menu.
- Press the [MENU] key again to enter the selected menu.
- Use the UP/DOWN keys or the channel knob to choose menu options, or input keypad number to enter the function quickly.
- Press the [MENU] key to confirm and return to the main menu.
- Press [EXIT] to exit the menu and return to normal operation mode.
Note: Frequency step, repeater shift direction, and frequency shift can only be set in frequency mode.
Scanning Mode
You can assign the scanning function to the side keys PF2/PF3 or long press button 1 to start frequency or channel scanning. The RT-900 offers three scanning modes:
- Time Operation Mode (TO): When the walkie-talkie detects a signal, it stops scanning and stays at the same frequency. After 5 seconds, it will resume scanning, even if the signal is still present.
- Carrier Operation Mode (CO): The walkie-talkie stops scanning and remains at the same frequency when it detects a signal, until the signal disappears. There is a 2-second delay before scanning resumes after the signal is lost.
- Search Operation Mode (SE): Upon detecting a signal, the walkie-talkie exits the scan and stays on this frequency.
Commercial FM Radio Broadcast Reception (Long Press Button 0)
- Long press the button 0 to turn on the FM RADIO; the screen will display the current frequency.
- Use the UP/DOWN keys or the channel knob to adjust the frequency. You can also input a frequency directly via the keypad. Press the OK button to switch the FM RADIO band between 65-76 MHz and 76-108 MHz.
- Simultaneously press the # key to enter automatic channel search mode. Long press the button 0 again to turn off the FM RADIO.
Frequency Sweep Function / Copy Frequency
This function is used to seek the frequencies and sub-tones of nearby radios for immediate communication. After defining the side keys (PF buttons) as SEARCH, press the button until the LCD displays "SEARCH/SEEK...". Press the Menu button to select the frequency band from UHF/VHF/200M/300M. After capturing a frequency, it will continue to seek sub-tone CTCSS/DCS. If no sub-tone is found, the LCD will display "NONE." At this point, you can press the [MENU] key to save the frequency to a specified channel, or press the UP or DOWN key to start the next frequency scan.
Weather Forecast NOAA Function
Press the designated side key (defined as NOAA from Menu 22-24) to activate this function. The radio has 10 built-in fixed frequencies. You can press the UP/DOWN keys to select the frequency you want to listen to. Note: The NOAA weather forecast function is available only in countries and regions that support the NOAA channels.
Channel Mode and Frequency Mode Switch
Press the VFO/MR button to switch between channel mode and frequency mode.
DTMF Encode Sending
Fast Operation: Press and hold the PTT button while entering the number keys 0-9, MENU, UP, DOWN, EXIT, *, and #. The radio will transmit DTMF codes 0-9, A, B, C, D, *, and #. Release the button to stop sending codes.
Editing DTMF Code: In standby mode, long press the DTMF button to enter the DTMF code editing interface. You can enter codes 0-9, OK, UP, DOWN, Exit, *, and # via the keypad. Press PTT to send the DTMF code.
PTT-ID Function
Transmit identity codes or call codes via DTMF. There are 15 sets of call codes, configurable through "Programming Software → Edit → DTMF". Each signal or A/B band can independently select the call code group to be sent. Configure identity code parameters via "Programming Software → Edit → DTMF → Local ID Code". There are three transmission methods:
- Send on Press: After pressing the PTT, the call code/identity code is sent first, followed by the voice signal.
- Send on Release: After releasing the PTT, the call code/identity code is sent, then the transmission ends.
- Send Both: The call code/identity code is sent both when the PTT is pressed and released.
Note: Since the identity code operation is independent of the call code, if there is a conflict between the identity code and the call code settings, the identity code will be sent.
Shortcut Keys Combination
| Long Press Number | Function | Description |
|---|---|---|
| 1 | SCAN | Enter scanning function |
| 2 | Memory Channel | Store frequency into channel |
| 3 | Frequency step | Set frequency step |
| 4 | Power Select | Select High, Middle, Low power |
| 5 | Squelch | Adjust squelch levels |
| 6 | Dual Standby | Turn on/off dual standby |
| 7 | CTCSS | Set CTCSS sub tone |
| 8 | Shift Direction | Set repeater shift direction |
| 9 | Offset | Set repeater offset frequency |
| 0 | FM Radio | Turn on FM Radio broadcast |
| * | DTMF | DTMF tone edit |
| # | Keypad lock | Lock/Unlock keypad |
Menu Function List
| No. | Menu | Second Menu | Setting |
|---|---|---|---|
| 0 | SQL | 0,...,9 | Adjusts squelch level. 0 opens squelch entirely, 9 is highest sensitivity. |
| 1 | STEP | 2.50K, 5.00K, 6.25K, 10.00K, 12.50K, 20.00K, 25.00K, 50.00K | Sets frequency step in VFO/frequency mode. |
| 2 | TXP | HIGH, Middle, LOW | Sets transmit power to High, Middle, or Low. |
| 3 | SAVE | 1.Normal Mode, 2.Super Mode, 3.Deep Mode | Selects power save ratio (sleep cycles to awake cycles). Higher number means longer battery life but may miss first syllables. |
| 4 | VOX | OFF, 1,2,...,9 | Activates VOX function. Level 1 is most sensitive. |
| 5 | W/N | WIDE, NARROW | Sets wideband (25Khz) or narrowband (12.5Khz) mode. |
| 6 | ABR | ON, 5s/10s...3min | Background light always on or auto switch off time. |
| 7 | TDR | OFF, ON | Dual frequency standby off or on. |
| 8 | BEEP | OFF, ON | Operate beep off or on. |
| 9 | TOT | 15S,..., 75S | Time out timer for transmit. |
| 10 | MEMCH | 001,...,256 | Creates new channels. |
| 11 | DELCH | 001,...,256 | Deletes a stored channel. |
| 12 | R-CTCSS | OFF, 67.0Hz,..., 254.1Hz | Receive Standard CTCSS. |
| 13 | R-DCS | OFF, D023N,..., D754I | Receive Standard DCS. |
| 14 | T-CTCSS | OFF, 67.0Hz,..., 254.1Hz | Transmit Standard CTCSS. |
| 15 | T-DCS | OFF, D023N,..., D754I | Transmit Standard DCS. |
| 16 | VOICEPRI | OFF, ON | Subtone encryption on/off. |
| 17 | CH-NAME | Channel Name | Input channel name. |
| 18 | ROGER | OFF, ON | Sends an end-of-transmission tone. |
| 19 | TONE | 1200, 1450, 1750, 2100 | Sends a burst tone. |
| 20 | BCL | OFF, ON | Busy channel lockout. |
| 21 | SC-REV | TO, CO, SE | Scanning resume method (Time, Carrier, Search). |
| 22 | PF2 | SOS/LAMP/RADIO/TXPOWER/SCAN/SEARCH/NOAA | Assigns function to short press of PF2 key. |
| 23 | PF2 LONG PRESS | SOS/LAMP/RADIO/TXPOWER/SCAN/SEARCH/NOAA | Assigns function to long press of PF2 key. |
| 24 | PF3 | SOS/LAMP/RADIO/TXPOWER/SCAN/SEARCH/NOAA | Assigns function to short press of PF3 key. |
| 25 | OFFSET | 0.0000 | Frequency difference between radio transmission and reception. |
| 26 | SFT-D | OFF, +, - | Repeater shift direction. |
| 27 | POWER ON MSG | LOGO, VOLTAGE | Power on show Logo or Voltage. |
| 28 | S-CODE | 1,2,3...15 | DTMF Signal codes. |
| 29 | DTMF CODE | OFF, BOT, EOT, BOTH | Transmit DTMF code (Off, Begin of Transmission, End of Transmission, Both). |
| 30 | DTMFST | DT-ST, ANI-ST, DT+ANI | DTMF auto sending code options. |
| 31 | AUTOLOCK | OFF, 5S, 10S, 15S | Time to auto keypad lock. |
| 32 | SCAN ADD/Delete | ADD, Delete | Add or delete channels from scan list. |
| 33 | TONE | 1000hz, 1450hz, 1750hz, 2100hz | Burst tone frequency. |
| 34 | PTT-LT | 0,100,...,1000Ms | Delay time before automatic DTMF transmitting. |
| 35 | MENU EXIT TIME | 5,10,...,60S | Delay time for exiting menu due to no operation. |
| 36 | VOX DELAY | 0.5SEC...2.0SEC | VOX delay time. |
| 37 | STE | OFF, ON | Squelch tail noise eliminate set off/on. |
| 38 | AL-MOD | ON SITE, SEND SOUND, SEND CODE | Field alarm mode. |
| 39 | SCRAMBLE | OFF/ON | Voice scrambler function. |
| 40 | NOISE REDUCTION | ON/OFF | Noise Reduction/Cancellation (Bluetooth Version Only). |
| 41 | BLUETOOTH | ON/OFF | Bluetooth connect with mobile app (Bluetooth Version Only). |
| 42 | RESET | VFO, ALL | Menu initialization (VFO or All). |
| 43 | VERSION | Firmware, Hardware | Displays Firmware and Hardware version. |
Maintenance
- Cleaning: To clean the equipment and/or the battery charger, ensure it is OFF and use an antistatic cloth (preferably) or a humid (not wet) cloth. Do not spray directly with any liquid or product. Never use polish home products, detergents, alcohol, or solvent.
- Battery Care: Avoid replacing the battery pack with an incompatible one to prevent explosion risk.
- General Care: Do not expose the equipment or battery charger directly to water or sunlight for extended periods. Avoid placing it near heat sources (radiators, etc.), or in areas with excessive dust or dirt, fire, or explosive conditions. Do not store the transceiver inside a vehicle that is parked in direct sunlight.
- Humidity Condensation: If humidity condensation occurs (e.g., moving from a cold to a warm environment), clean with a dry cloth and wait until it dries off before powering on.
Troubleshooting
- Radio Receiving but Not Transmitting: If the RT-900 is receiving but not transmitting, check the display for any error messages or indicators. Ensure the PTT button is functioning correctly and that the selected channel is not busy (BCL function).
- Partial Keyboard Lighting: If the keyboard lights up only partially, this may indicate a minor display issue. If it affects functionality, contact support.
- Missing Parts: If any parts, such as the belt clip fastening screw, are missing upon arrival, contact the seller or manufacturer for replacement.
- Poor Reception (SatCOM): While the device has a wide frequency range, specific reception quality on SatCOM may vary. Ensure the antenna is properly attached and consider environmental factors.
- Reception While Charging: The radio should receive properly while charging. If reception is affected, ensure the charging cable and adapter are functioning correctly and not causing interference.
Specifications
Technical Specification
| Category | Specification |
|---|---|
| General | |
| Frequency Range | 18-108MHz TX/RX, 108-136MHz RX, 136-999MHz TX/RX (European: 144-146Mhz / 430-440Mhz TX/RX; USA/Canada: 144-148Mhz / 420-450Mhz TX/RX; Other Country: 136-999Mhz) |
| Storage Channels | 256 |
| Antenna | Dual Band U/V Antenna |
| Frequency Stability | ±1ppm |
| Dimensions | 126*57*36cm (included antenna) |
| Weight | 320g |
| Operating Temperature | -20 °C to +60°C |
| Antenna Impedance | 50Ω |
| Receiving | |
| Sensitivity | FM(12dB SINAD) -121 dBm, WFM(20dB SINAD) -110 dBm, AM (10dB S/N) -113 dBm |
| Audio Frequency | ≥0.5W |
| Audio Distortion | <10% |
| Transmitting | |
| Output Power | 5W-10W |
| Emission Current | <1.5A |
| Max Freq Deviation | <5Khz@25Khz/≤2.5Khz@12.5Khz |
| Modulation Distortion | ≤5% |
| Stray Power | <7.5uW |

Figure 8: RT-900 Sample Test Data (may not correspond to reality).
User Tips
- Many users praise the RT-900 for its excellent price-to-quality ratio and overall performance.
- The radio is noted for its fast delivery and good tracking information.
- The product generally works perfectly as described by the manufacturer.
- For optimal performance, ensure the antenna is securely attached.
- If you have the Bluetooth version, utilize the app for easier programming and to enable noise reduction.
Safety & General Information
Environmental Protection
All articles displaying the recycling symbol on the body, packaging, or instruction manual must not be thrown away into normal disposal bins but brought to specialized waste disposal centers. Here, the various materials will be divided by characteristics and recycled, thus making an important contribution to environmental protection.General Safety Precautions
- Only use this equipment for its intended purpose. The manufacturer and salesperson will not accept any responsibility, and the guarantee will be invalidated in the event of inadequate use.
- This equipment does not have user-repairable components. Always consult an Authorized Technical Service for any repairs.
- Do not operate the equipment, install, or remove the battery pack while it is turned on. Always use the ON/OFF control.
- Install the battery pack and accessories (optionals) correctly, according to the instructions in this manual.
- Never transmit with the transceiver if the antenna is damaged.
- Do not transmit with the transceiver for extended periods of time.
- Do not touch the antenna with your hand or any part of your body when the equipment is transmitting.
- In the event of malfunction (e.g., scent of burning, smoke), turn it off immediately or disconnect the battery charger from the AC wall outlet and consult Technical Service.
- Do not introduce any object into the speaker holes or transceiver connectors.
- If using an external headset (optional), reduce the volume to the lowest possible maximum level; avoid very high audio levels.
- Do not expose the equipment or battery charger directly to water or sunlight for extended periods. Do not place it near a heat source (radiators, etc.), or in areas with excessive dust or dirt, fire, or explosive conditions. Do not store the transceiver inside a vehicle that is parked in direct sunlight.
- Avoid humidity condensation. If condensation occurs, clean with a dry cloth and wait until it dries off before powering on.
- Do not place anything on the transceiver that can spill onto it.
- If the transceiver causes interference with video recorders, DVDs, radio, television receivers, or any other electronic equipment, move it away from the affected apparatus.
- Do not use this transceiver in the vicinity of other electronic equipment, especially medical equipment, as it can cause interference.
- Turn off and do not use the equipment in areas where its use is restricted or prohibited (e.g., coal gas, areas with explosion atmosphere, areas where it can interfere with the operation of other equipment, on board aircraft).
- Do not operate this transceiver while driving a vehicle; use hands-free systems ("VOX" function) and respect traffic regulations.
- Do not pulverize directly with any liquid or product on the transceiver, battery pack, or battery charger. Never use polish home products, detergents, alcohol, or solvent for cleaning.
- The use of incompatible accessories may limit the operation of the transceiver and could even cause damage, invalidating the guarantee.
Compliance with RF Exposure Standards
This two-way radio uses electromagnetic energy in the radio frequency (RF) spectrum. It uses RF energy or radio waves to send and receive calls. RF energy is one form of electromagnetic energy. Other forms include, but are not limited to, sunlight and x-rays. RF energy, however, should not be confused with these other forms of electromagnetic energy, which when used improperly, can cause biological damage. Very high levels of x-rays, for example, can damage tissues and genetic material.
Experts in science, engineering, medicine, health, and industry work with organizations to develop standards for safe exposure to RF energy. These standards provide recommended levels of RF exposure for both workers and the general public. These recommended RF exposure levels include substantial margins of protection.
All RADTEL two-way radios are designed, manufactured, and tested to ensure they meet government-established RF exposure levels. In addition, manufacturers also recommend specific operating instructions to users of two-way radios. These instructions are important because they inform users about RF energy exposure and provide simple procedures on how to control it.
Please refer to the following websites for more information on what RF energy exposure is and how to control your exposure to assure compliance with established RF exposure limits: http://www.who.int/en/
Local Government Regulations
When two-way radios are used as a consequence of employment, the Local Government Regulations requires users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a product label directing users to specific user awareness information. Your Radtel two-way radio has an RF Exposure Product Label. Also, your Radtel user manual, or separate safety booklet includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements.
Radio License
Governments classify radios, and most classified walkie-talkies require a local government license for operation. For detailed classification and use of your two radios, please contact the local government radio management departments. For the following specified classifications, an individual license is not required: USA/CA FRS, Australian CB, EU PMR446.
ISEDC Warning (Canada)
This product meets the applicable Industry Canada technical specifications. This device complies with ISEDC license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
For body-worn operation, this device has been tested and meets the FCC/ISED RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that positions the face up minimum distance is 25mm. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Warranty & Support
Manufacturer: XIAMEN RADTEL ELECTRONICS CO.,LTD
Address: 502, No.1, Jinyi Wuli, Huli, Xiamen, Fujian, China 361004
Email: support@radtel.com
The manufacturer and the salesperson decline any responsibility for derived damages of an inadequate, incorrect, or imprudent use of the equipment. Equipment internal manipulation, alteration, or change of the technical characteristics performed by personnel unaware of the Technical Service will invalidate the guarantee.
For further assistance or to view the official user manual in PDF format, please refer to the following link: Radtel RT-900 User Manual (PDF).