1. Introduction
Thank you for choosing the Onedo high-quality Dashcam. This product utilizes mainstream high-end Dashcam chips for main control encoding and decoding, providing truly high-definition driving recording footage.
Designed with vehicle structure in mind, this product is compact, elegant, and tailored for specific car models, allowing for a completely hidden installation. Users can easily install and configure it themselves.
Equipped with a high-performance, low-light HD image sensor and a unique installation design, this Dashcam adapts to various vehicle models, enhancing convenience, safety, and daily life. It captures high-definition video at up to 30 frames per second (fps), with optional audio recording. Features include automatic overwrite, loop recording, and compatibility with external memory cards up to 128GB (TF card).
This versatile innovation is primarily designed for in-vehicle driving recording, serving as an effective tool for enhancing road safety and accident evidence collection.
Before using, please read this user manual carefully and keep it in a safe place.
Figure 1.1: Onedo 4-Lens Hidden Dash Cam Overview
Figure 1.2: Key Features of the Dash Cam
Figure 1.3: Multi-Camera View Examples
Figure 1.4: Four-Lens 360° Panorama Coverage
2. Safety Precautions
- Do not operate the dashcam or view its display while driving.
- Ensure the dashcam is securely mounted and does not obstruct the driver's view or interfere with vehicle controls.
- Avoid exposing the dashcam to extreme temperatures or direct sunlight for prolonged periods.
- Use only the provided power cables or compatible replacements that meet DC 5V/2.5A specifications.
- Do not insert or remove the TF card while the device is powered on to prevent data corruption or damage.
- Keep the device away from water and moisture.
- Professional installation is recommended for hardwiring to the fuse box.
3. Package Contents
Please check the package for the following items:
- Main Dash Cam Unit (with integrated front, left, and right lenses)
- Rear Camera (optional, depending on model)
- Cigarette Lighter Power Supply Cable
- Fuse Box Hardwiring Kit (Default)
- Rear Camera Connection Cable
- User Manual (this document, also available as PDF: Download PDF)
- Mounting Accessories (e.g., adhesive pads, cable clips)
Figure 3.1: Dash Cam and Power Supply Cables
4. Product Overview
4.1. Main Unit
The main unit houses the primary recording module, display screen, and control buttons. It typically includes the front, left, and right cameras.
Figure 4.1: Dash Cam Buttons and Indicator Lights
4.2. Buttons and Ports
Refer to Figure 4.1 for button locations.
- RESET Hole: Used to restart the device in case of a freeze.
- OK Button: Long press (2s) to cycle modes (Recording, Photo, Playback). Short press (1s) to start/stop recording, capture photo, or play/pause video.
- UP Button: Short press to scroll up in menus/galleries or enable/disable WiFi connectivity (Live Recording Preview mode).
- Mode/Menu Button: Short press to switch modes (Recording/Photo/Playback). Long press (2s) to enter main menu settings.
- DOWN Button: Short press to scroll down in menus/galleries or cycle camera views (Front, Left, Right, Rear) in Live Recording Preview mode.
- Power Button: Long press (3s) to power on/off. Single press to turn screen off/on (screen protection).
5. Installation
5.1. Power Supply Options
The dashcam requires a DC 5V/2.5A power supply. We do not recommend using your own power supply and cables unless they meet these specifications.
5.1.1. Cigarette Lighter Power Supply (Requires separate purchase)
Advantages: Easy to install; simply plug into the car's cigarette lighter socket.
Limitations: No power when the car is off, so parking monitoring cannot be used.
Figure 5.1: Cigarette Lighter Power Supply Installation Diagram
5.1.2. Fuse Box Power Supply (Hardwiring Kit, Default)
Advantages: Allows continuous recording for 24/7 monitoring. Equipped with a chip that cuts off power when the car battery voltage is low, protecting the battery.
Limitations: Requires manual installation and wiring to the car's fuse box. Professional installation is strongly recommended.
Figure 5.2: Fuse Box Power Supply Wiring Diagram
Important Notice: Due to variations in vehicle models, professional installation is strongly recommended for fuse box wiring. These instructions are for reference only. Refer to your vehicle's owner's manual for exact fuse box position.
5.2. Main Unit and Power Supply Installation
- Installation Location: Suggest installing the recorder host as shown in diagrams. Hide the connection line along the front windshield into the ceiling and connect it to the fuse box through the A-pillar.
- Wiring Steps (for Fuse Box Power Supply):
- Connect the yellow power cable to a 12V constant fuse slot.
- Connect the red ACC ignition control wire to an ACC fuse slot.
- Connect the black wire to a metal ground bolt/screw.
- Start the car engine. When the blue light turns on and starts flashing, the device will power up and enter automatic recording mode.
Figure 5.3: Hidden Installation Steps
5.3. Rear Camera Installation
Ensure the power cable is properly connected to the dashcam, and the red wires from the rear camera are connected to the reverse light.
You have two options for rear camera installation:
- Install the rear camera above the inside of the windshield.
- Install the rear camera above the license plate light at the rear of the vehicle.
Figure 5.4: Rear Camera Installation Options
Figure 5.5: Rear Camera Cable Connection
5.4. Micro SD Card Installation
The dash cam does not have built-in storage. To enable normal recording, you must correctly insert a Micro SD card (TF card) into the dash cam's card slot.
- Use a high-speed Micro SD card with a capacity of no less than 8GB. The maximum supported capacity is 128GB.
- For stable multi-channel video recording, use a brand SD card of at least V30 class or higher. For 4K video, a V90 class or higher card (authentic SanDisk or Samsung recommended) is required. If the card's write speed is insufficient, the device will automatically downgrade to 1080P or 720P.
- Insert the Micro SD card in the correct orientation. Reverse insertion may damage the device/card.
- After insertion, the Micro SD card becomes the default storage space.
- For optimal performance, format the Micro SD card once per month.
Critical Warning: Do not insert/remove the TF card while powered on. This may cause card corruption or data loss.
6. Operation
6.1. Indicator Light Instructions
- Blue Light Flashing: The device is recording.
- Blue Light Solid: Recording has stopped; the device is in standby mode.
- Blue Light Fast Flashing: The device is updating its firmware.
6.2. WiFi / App Download & Setup
To use the Dashcam with a smartphone, download the companion app:
Figure 6.1: QR Code for App Download
- In the dashcam's settings menu, turn on the WiFi hotspot. The hotspot name (SSID) and password will be displayed on the recording screen.
- On your smartphone, go to WiFi settings, find the dashcam's WiFi hotspot, and connect using the default password:
12345678. - After connecting, open the app. The dashcam's time will sync with your smartphone's current time. Use the app to format the Micro SD card.
Note: If the WiFi hotspot is not connected within 5 minutes, it will automatically turn off.
6.3. Auto-Recording Function
- Automatic Startup: The dash cam powers on automatically when the vehicle engine starts, with the charging indicator illuminated and recording indicator flashing.
- Recording Management:
- Videos are saved in segmented files on the TF card.
- Older recordings are automatically overwritten when the card is full (Loop Recording).
- Segment duration settings (selectable via settings-Loop recording): 1 min / 2 min / 3 min / 5 min / OFF.
6.4. Date & Time Settings
Important: Set accurate time before first use for valid accident evidence time stamps.
Setup Procedure:
- Enter Settings Menu: In standby mode, long-press the [M] button for 2 seconds to enter the main menu settings. Short-press [M] to navigate system settings.
- Navigate to Date/Time: Use the Up/Down buttons to highlight "Date & Time". Short-press [OK] to enter adjustment mode.
- Adjust Values: Use Up/Down buttons to modify numbers. Press [Mode] button to switch between Year → Month → Day → Hour → Minute.
- Save & Exit: Press [OK] to confirm.
6.5. Voice Control Commands (Currently supports Chinese commands only)
- "关闭屏幕" (Turn off screen)
- "打开屏幕" (Turn on screen)
- "打开前录" (Start front recording)
- "打开后录" (Start rear recording)
- "打开录音" (Enable audio recording)
- "关闭录音" (Disable audio recording)
- "我要拍照" (Take a photo)
6.6. Rearview Camera (Reverse Assist)
When powered on, the dashcam will automatically start recording. In any mode, if the vehicle is put into reverse, the rearview image will be displayed. After reversing, the dashcam will automatically return to recording mode.
6.7. Motion Detection
In motion detection mode, the dashcam will start recording when movement is detected. If no movement is detected for 30 seconds, recording will stop. To exit motion detection mode, simply turn off the motion detection feature.
6.8. Gravity Sensor Function (G-Sensor)
Collision Detection & Locking: When a severe collision is detected, the dashcam automatically locks the relevant video segment (duration matches current loop recording setting). Protected files cannot be overwritten.
Key Details:
- File Naming: Locked files:
LOC_XXXX, Normal files:MOV_XXXX. - Sensitivity Adjustment: Available settings: High/Medium/Low/Off (adjustable in settings menu).
6.9. Parking Surveillance Mode (Requires Hardwiring Kit)
When activated while the device is powered off, the G-Sensor detects minor vehicle vibrations and automatically powers on, records a 30-second video clip, and then powers down. If another impact is detected after 1 minute, the cycle repeats.
File Protection: All parking surveillance recordings are automatically locked and protected from being overwritten during loop recording.
6.10. Time-Lapse Recording (Requires Hardwiring Kit)
Operation Modes:
- When Time-Lapse is OFF:
- Device operates in normal loop recording mode.
- Automatically powers off when vehicle ignition is turned off (ACC disconnected) or ACC power line is cut.
- When Time-Lapse is ON:
- Normal loop recording while driving.
- Automatically switches to time-lapse recording mode when ACC ignition line is disconnected.
- Continues loop recording in time-lapse mode.
Important Notes:
- Screen Behavior: A blank screen indicates power-saving mode (screen saver active).
- No TF Card Installed: No pop-up notifications will appear, and time-lapse mode will not activate.
Video 6.1: Example Driving Footage from Dash Cam
7. Product Specifications
| Feature | Specification |
|---|---|
| Product Name | Four-Channel Dashcam |
| Product Features | High-definition camera, HD recording |
| Lens | A+ grade high-resolution ultra-wide-angle lens |
| Aperture | F1.5 |
| Resolution | 4K/2K/1080P/720P (Camera Resolution: 2560x1440) |
| Image Quality | 12M/10M/8M/5M/3M/2M/1.3M (Pixels: 1200Mega) |
| File Format | MOV |
| Video Format | H.264 (Video Code: AVC) |
| Photo Format | JPEG |
| Auto Power On/Off | Supports auto power-on when the car starts and auto power-off when the car stops (optional motherboard feature) |
| Language Support | English, Traditional Chinese, Simplified Chinese, Japanese, French, German, Korean, Italian, Portuguese, Russian, Spanish |
| Loop Recording | Seamless loop recording without missing seconds |
| Motion Detection | Supported |
| G-Sensor | 3-Axis Collision Detection |
| Parking Monitoring | Supported |
| Time-Lapse Recording | Supported |
| Light Frequency | 50Hz/60Hz |
| Date/Time Stamp | Supported |
| Audio Recording Switch | Supported |
| Memory Cards | Micro SD Card, 8-128GB, V30/U3 or Higher (Required Reading Speed: Class 10, Max External Memory: 128G) |
| Audio | Built-in mic & speaker (Audio Recorded: Yes) |
| WiFi | Supported (APP Compatibility: Yes) |
| Power Input | 5V/2.5A (Power Source: Corded Electric, Is Batteries Included: No) |
| Working Temperature | -20~70°C |
| Cable Length | 6m |
| Weight | 0.53 kg |
| Built-in Screen | Yes (Display: IPS, Display Size: 3"-5", Screen Ratio: 16:9) |
| Touch Screen | No |
| NightShot Function | Yes |
| Rear Camera | Yes |
| Original Package | Yes |
| View Angle | 170° |
| Frames Per Second | 30 |
| Number Of Lenses | 4 |
| Assembly Mode | Hidden Type |
| Chipset Manufacturer | RK |
| Item Type | Car DVR |
| Interface | AV-In, Wi-fi, Micro SD/TF |
| Special Features | G-Sensor, motion detection, sd/mmc card, Anti Surge Voltage Impact, Anti Fog, Anti Vibration, Real Time Surveillance, Automatic White Balance, Wide Dynamic Range, wifi function, Voice Control, Parking Monitor, 3D DNR |
Note: Specifications subject to change without notice.
8. Troubleshooting (FAQ)
8.1. Rear Camera Not Displaying or One Camera Displaying Abnormally
- Check the connections between the rear camera and its cable, and between the cable and the dashcam, to ensure they are securely attached.
- Verify that the power supply is compatible. We recommend using the power supply included in the packaging (DC 5V/2.5A). If using a third-party power supply, ensure it provides 5V and consistently delivers greater than 2.5A.
- Check whether your Type-C cable supports a current transmission of greater than 2.5A (avoid three-in-one charging cables).
Figure 8.1: Compatible Power Adapter and Cable
8.2. WiFi Connection Issues
If you are having trouble connecting the app via WiFi:
- Ensure the dashcam's WiFi hotspot is enabled in the settings menu.
- Confirm you are using the correct default password (
12345678). - Remember that the WiFi hotspot automatically turns off if not connected within 5 minutes.
- Some users report difficulty maintaining a stable WiFi connection or activating it consistently, though others successfully connected by following setup instructions carefully.
8.3. Recording Issues (e.g., sequence recording, cyclicality)
- To record a sequence, navigate through the menu using the physical buttons. The interface might be small, but it's functional once configured.
- If cyclical recording is off but videos are still segmented (e.g., 5 minutes), this is normal behavior. The dashcam saves videos in segmented files. When the card is full, older recordings are automatically overwritten if loop recording is enabled.
8.4. Power and Battery
- The dash cam does not include an internal battery. It requires continuous external power from either the cigarette lighter or hardwiring to the fuse box.
- Using the fuse box power supply enables reliable 24/7 monitoring and stable operation when properly installed.
9. User Tips
- SD Card Quality: Invest in a high-quality V90-grade SD card to ensure full 4K Ultra-HD recording potential and stable performance.
- Installation: The compact design allows for discreet installation. Many users find installation straightforward, especially when routing cables discreetly.
- App Connectivity: The app generally recognizes the dash cam instantly and functions well for viewing and downloading recordings.
- Cable Length: The rear camera cable length is suitable for sedans. For larger vehicles like trucks, an extender might be necessary.
10. Warranty and Support
This product is covered by a standard manufacturer's warranty. For specific warranty details, please refer to the documentation provided at the time of purchase or contact your retailer.
For technical support, troubleshooting assistance, or inquiries regarding your product, please contact the seller or manufacturer directly.