Introduction
The UGEE UT2 Fun Drawing Pad is a versatile 10.36-inch graphic tablet monitor designed for creative expression, note-taking, and general multimedia use. Featuring a 2K resolution display, Android 14 operating system, and a pressure-sensitive U-Pencil, it offers a natural and responsive digital art experience. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device.
Package Contents
Before you begin, please ensure all items listed below are present in your package. If any items are missing or damaged, please contact customer support.
Figure 1: UGEE UT2 Fun Drawing Pad Package Contents
- UGEE UT2 Fun Drawing Pad
- U-Pencil Stylus
- Eject Pin
- Replacement Nib (x1)
- Nib Extractor
- Smart Folio (Case)
- Drawing Glove
- Power Adapter (18W)
- USB-C Cable
- Quick Guide
- Warranty Card
Setup Guide
1. Initial Charging
The UGEE UT2 comes with a built-in 7000mAh battery. For optimal performance, fully charge the device before first use.
- Connect the provided USB-C cable to the tablet's USB-C port.
- Connect the other end of the USB-C cable to the provided 18W Power Adapter.
- Plug the Power Adapter into a wall outlet.
- The charging indicator will illuminate. A full charge typically takes approximately 1 hour.
Figure 2: 7000mAh Battery with 18W Fast Charging
2. Powering On/Off
- To Power On: Press and hold the Power button (usually located on the side) until the UGEE logo appears on the screen.
- To Power Off: Press and hold the Power button until a power-off menu appears. Select "Power Off" and confirm.
- To Restart: Press and hold the Power button until a power-off menu appears. Select "Restart" and confirm.
3. Stylus (U-Pencil) Usage
The U-Pencil is an active capacitive stylus designed for precise input on your UT2 tablet.
- The U-Pencil features 4096 pressure levels and 60 degrees of tilt support for a natural drawing and writing experience.
- It has a low response time of 20ms and an accuracy of ≤0.5mm.
- To replace a nib: Use the provided nib extractor to gently pull out the old nib, then insert a new replacement nib until it is secure.
Operating Instructions
1. Android 14 Operating System
The UGEE UT2 runs on the latest Android 14 operating system, providing a familiar and intuitive user interface. You can download and install various applications from the Google Play Store to enhance your experience.
Figure 3: Android 14 OS and Creative Applications
2. Display Features
The 10.36-inch IPS screen boasts a 2K resolution (2000x1200) with a 16:10 aspect ratio. The NanoMatte finish provides a paper-like texture, reducing glare and enhancing the drawing experience. It supports 16.7 million colors and covers over 72% NTSC color gamut, ensuring vibrant and accurate visuals. The display also features 10-point multi-touch for intuitive gesture control.
Figure 4: Paper-touch Screen Details
3. Creative Workflow with PaintPal
Unleash your creativity using the pre-installed PaintPal application, designed to assist in enhancing your artwork and sparking new ideas. The U-Pencil's precision and the tablet's responsive display make digital art creation seamless.
4. Connectivity
- Wi-Fi: Supports 5G Wi-Fi for fast internet access.
- Bluetooth: Equipped with Bluetooth V5.3 for connecting wireless accessories.
- USB: Features a Type-C port for charging, data transfer, and OTG (On-The-Go) functionality.
- TF Card: Expand storage up to 1TB using a TF (microSD) card.
- Earphone: Type-C 3.5mm earphone jack for audio output.
5. Cameras and Audio
- Cameras: 8MP Auto-Focus (AF) Rear Camera and 8MP Fixed-Focus (FF) Front Camera.
- Audio: Features 2 speakers and 2 microphones for clear audio input and output.
- Video: Supports 2K 30fps / H.265 video decode and 1080P 60fps video re-encode.
- Sampling Rate: Audio sampling rate from 8kHz to 192kHz.
6. Sensors
The tablet includes GPS, Gravity, Light, and Hall sensors for various functionalities and enhanced user experience.
Maintenance
1. Cleaning Your Device
- Screen: Use a soft, lint-free cloth, slightly dampened with water or a screen cleaner, to gently wipe the display. Avoid harsh chemicals or abrasive materials.
- Body: Wipe the metal body with a soft, dry cloth.
- Stylus: Keep the U-Pencil clean and free from dust. Replace the nib if it shows signs of wear for optimal performance.
2. Battery Care
To prolong the life of your 7000mAh battery:
- Avoid extreme temperatures.
- Do not let the battery completely drain frequently.
- Use the original 18W charger and USB-C cable for charging.
- The tablet offers up to 130 hours of operating time and 60 days of standby time on a full charge.
3. Storage Management
The UGEE UT2 comes with UFS 2.2 128GB internal storage. You can expand this by inserting a TF (microSD) card up to 1TB into the designated slot. Regularly manage your files and applications to ensure smooth operation.
Troubleshooting
If you encounter issues with your UGEE UT2, refer to the following common solutions:
- Device not turning on: Ensure the battery is charged. Connect the charger and wait a few minutes before attempting to power on again.
- Stylus not responding: Check if the nib is properly inserted. If the nib is worn, replace it. Ensure the screen is clean.
- Slow performance: Close unnecessary background applications. Clear cache and temporary files. Consider performing a factory reset if the issue persists (back up your data first).
- Connectivity issues (Wi-Fi/Bluetooth): Try toggling Wi-Fi or Bluetooth off and on. Restart the tablet. Ensure you are within range of the network/device.
- Apps crashing: Ensure apps are updated to their latest versions. Clear the app's cache or reinstall it.
Specifications
Figure 5: UGEE UT2 Key Features and Specifications
| Feature | Specification |
|---|---|
| Brand Name | UGEE |
| Type | Pen Tablet Monitor, Digital Tablets |
| Model | UT2 |
| Dimensions | 247.06 x 156.82 x 7.53mm |
| Weight | 466g |
| Operating System | Android 14 |
| Processor | 6nm Octa-core (MediaTek MT8781) |
| RAM | LPDDR4X 6GB 3200Mbps |
| Storage | UFS 2.2 128GB (Expandable up to 1TB via TF Card) |
| Screen Size | 10.36 inch |
| Resolution | 2000x1200 (2K) |
| Color Gamut | NTSC > 72% |
| Colors | 16.7 Million |
| Aspect Ratio | 16:10 |
| Multi-Touch | 10-Point |
| Battery Capacity | 7000mAh |
| Charger | 18W |
| Charging Time | 1 hour |
| Operating Time | 130 hours |
| Standby Time | 60 days |
| Rear Camera | 8MP AF |
| Front Camera | 8MP FF |
| Speakers | 2 |
| Microphones | 2 |
| Video Decode | 2K 30fps / H.265 |
| Video Recode | 1080P 60fps |
| Audio Sampling Rate | 8kHz to 192kHz |
| Sensors | GPS, Gravity, Light, Hall |
| Wi-Fi Display | Support |
| Bluetooth | V5.3 |
| Earphone Port | Type-C 3.5mm |
| USB Port | Type-C |
| TF Card Support | Max. 1TB |
| OTG | Support |
| Stylus Type | Active Capacitive |
| Stylus Pressure Levels | 4096 |
| Stylus Tilt Support | 60 degrees |
| Stylus Response Time | 20ms |
User Tips
- Handwriting Recognition: While the tablet supports precise stylus input, dedicated handwriting recognition features often depend on specific applications. Explore the Google Play Store for apps that offer advanced handwriting-to-text conversion.
- Connecting to Other Devices: The UT2 supports OTG (On-The-Go) via its Type-C port, allowing you to connect USB peripherals like keyboards, mice, or external storage. For connecting to a mobile phone, direct display output might not be universally supported; check your phone's compatibility with display mirroring or casting features.
- Note-Taking: The tablet is ideal for note-taking. Utilize the U-Pencil and various note-taking apps available on Android to digitize your notes, sketches, and annotations efficiently.
- Portability: Weighing only 466g and with a slim 7.5mm profile, the UT2 is designed for portability. Use the Smart Folio for protection when traveling.
Figure 6: Lightweight and Portable Design
Figure 7: UT2 for Note Taking
Warranty and Support
The UGEE UT2 Fun Drawing Pad comes with a 1-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
For technical assistance, warranty service, or any other inquiries, please contact UGEE customer support through their official website or the contact information provided in your Quick Guide or Warranty Card.
