1. Introduction
This manual provides comprehensive instructions for the safe and effective use of your Superun 2-in-1 Portable Treadmill. Designed for both home and office environments, this treadmill offers a convenient way to incorporate walking and jogging into your daily routine. Please read this manual carefully before initial use and keep it for future reference.
Key features include a powerful 2.5HP motor, a 2-in-1 sport mode, a speed range of 0.6-3.8 mph, and a weight capacity of up to 300 lbs. It features an anti-slip, shock-absorbing 5-layer running belt for a comfortable workout, an LED display for real-time data monitoring, and a remote control for easy speed adjustments. The treadmill is also designed for easy movement and storage with built-in wheels and a slim profile.
Video: Overview of the Superun 2-in-1 Portable Treadmill's features and usage scenarios.
2. Safety Precautions
Before using this product, please read all instructions carefully.
Warning: Please follow the instructions below to avoid injury to yourself or others.
- Before using the treadmill, make sure it is properly grounded to avoid any accidents or dangers.
- Please start with proper exercise, as excessive exercise may affect your health.
- (1) Wear appropriate sports shoes when exercising (avoid running in slippers, as slippers will tangle with the machine and cause malfunctions).
- (2) Keep the room clean and tidy to avoid static electricity adsorption that may bring lumps into the treadmill and cause treadmill malfunction.
- This treadmill is designed for one person. Do not allow children or pets to approach when the treadmill is running.
- When the treadmill is fully extended, the minimum distance required (between the treadmill and walls and furniture) is not less than 3 feet on left and right and not less than 6 feet in front and back.
- If the treadmill or power cord is faulty or damaged, do not use the treadmill. Please contact your local dealer immediately for repair.
- Do not touch any moving parts with your hands. Do not squeeze or stuff anything into the treadmill.
- The treadmill can only be used indoors. Do not use it outdoors or in the gym.
- Place the treadmill on a clean, dry and moisture-free surface, keep the treadmill well ventilated, and make sure there are no sharp objects nearby.
- Do not get off the treadmill until it has completely stopped.
- Do not use the treadmill when using respiratory equipment or sprays near the treadmill.
- To keep the treadmill running properly, do not install or attach any accessories or parts that are not for this machine.
- All parts of the treadmill must be assembled correctly and securely. The various parts of the treadmill need to be checked regularly to ensure that they are firmly fixed. Parts that show signs of damage should be replaced immediately.
- Turn off the power and unplug the treadmill immediately after use.
- After each use of the treadmill, wipe key areas such as the console with a clean towel or cloth to wipe off sweat and dirt. Be careful not to use the treadmill near water and heat sources.
- The product features easy transportation and is equipped with wheels for seamless handling. Before moving the treadmill, please confirm that the plug has been inserted in and folded correctly.
- Proper maintenance helps keep the treadmill in the best condition, while improper maintenance may damage or shorten the life of the treadmill; clean and maintain the treadmill regularly to ensure that all parts remain intact.
3. Parts List
Before assembly, please ensure all parts are present and undamaged.
| No. | Name | Quantity |
|---|---|---|
| 1 | Main Frame | 1 piece |
| 2 | Power Cord | 1 piece |
| 3 | Remote Controller | 1 piece |
| 4 | Refueling Bottle | 1 piece |
| 5 | L-type hex socket (dual purpose) | 1 piece |
| 6 | Manual | 1 piece |
| 7 | Quick & Easy Guide | 1 piece |
4. Setup
Note: If your device includes an activation warranty benefit, please follow the instructions on the quick operation card to activate the device before normal use.
Placement
Place the machine on a level surface with a gap of 19.7 inches/0.5m in front and back. Make sure the machine is balanced and the rubber pads are firm and in contact with the ground.

Power Connection
Plug in the power supply and turn on the machine.
Remote Control Setup
Make sure the batteries are properly installed in the back of the remote controller, then press the "On/Off" key. Note that before operation, a 3-second delay will be displayed on the panel.

First Use
Once powered on and the remote is ready, you can start using the machine. The initial speed after the 3-second countdown is 0.6mph/1kph.
5. Operating Instructions
Remote Control
The remote control allows you to manage the treadmill's speed and power.
- Speed- key: Reduces the speed of the machine.
- Speed+ key: Increases the speed of the machine.
- On/Off key: Slowly starts or stops the machine.
In standby mode, pressing the "On/Off" key directly will initiate a 3-second countdown on the display. A beep will sound each second. After the countdown, the motor will start at 0.6mph/1kph, and you can then adjust the speed using the "Speed+" and "Speed-" keys.
Display and Keys
When the machine is running, the display window automatically switches every 5 seconds to show different information. The indicator light at the bottom changes with the displayed window.

- "wifi" window: Displays the WiFi connection status. The icon lights up when connected successfully.
- "bluetooth" window: Displays the Bluetooth connection status. The icon lights up when connected successfully.
- "speed" window: Shows the current speed. Initial value: 0.6/1.0.
- "time" window: Displays the exercise time. Initial value: 0:00, range: 0:00-99:59.
- "distance" window: Displays the moving distance. Initial value: 0.00, range: 0.00-99.99.
- "calories" window: Displays the calorie consumption value. Initial value: 0.00, range: 0.00-9999.
Note:
- If the WiFi connection fails or disconnects, wait until the WiFi signal is stable before restarting the treadmill and reconnecting to the Internet.
- If the treadmill is not connected to PitPat, the Bluetooth icon on the treadmill will be inactive. Conversely, if the treadmill has successfully connected to the app, the Bluetooth symbol on the machine should be active.
PitPat App Connection Guide
The treadmill allows connection to your phone via Bluetooth for enhanced control and tracking.
- Download the PitPat App on your phone (iOS 13 or above; Android 6.0 or above) or scan the QR code.
- Open the PitPat App and follow the instructions to sign in or register your account.
- Connect the treadmill:
- Turn on Bluetooth and location services on your mobile phone.
- Open the PitPat App and grant necessary permissions.
- Go to the app home page and click the treadmill icon in the upper right corner to enter the search interface.
- Your phone will automatically search for nearby devices. Turn on the treadmill (the device that starts with PitPat-T represents your treadmill) to enable connection.
When the treadmill makes a beep, the connection is successful, and the Bluetooth icon on the treadmill panel will light up. Ensure your phone has an active internet connection to control the treadmill via Bluetooth. For network configuration details, refer to the app's descriptions.

6. Maintenance
Belt Adjustment
The running belt may stretch with continued use, causing wear or slippage. Adjust the belt for optimal performance.
- Lateral Adjustment:
- If the belt tilts left, turn the left screw 1-2 turns clockwise.
- If the belt tilts right, turn the right screw 1-2 turns clockwise.
Test run the treadmill and repeat until the belt is aligned.
- Tension Adjustment:
- If the belt is too tight (causing resistance), turn both screws 1-2 turns counter-clockwise to loosen.
- If the belt is too loose (slipping), turn both screws 1-2 turns clockwise to tighten.
Warning! Do not overtighten the roller! This may cause permanent damage to the bearing!
Lubrication
Lubricate the treadmill after six months or 100 hours of cumulative running time.
- Add 1/3 to 1/2 bottle of lubricant each time.
- To check lubrication status: Turn off the treadmill, lift the running belt from one side, and touch the surface underneath. If lubricant is present, no more is needed. If dry, refill with non-petroleum-based lubricant.
- To apply lubricant:
- Clean the treadmill.
- Turn off power, pull up the running belt, and pour silicone oil onto the inner surface of the running board.
- Start the treadmill and lubricate for 10-20 seconds at a speed of 3mph/4.8kph.
7. Troubleshooting (Error Codes)
If you encounter any issues with your treadmill, refer to the error codes and solutions below.
| Error Code | Description | Solutions |
|---|---|---|
| SAFE | Safety lock detached | Ensure the safety lock is properly engaged. |
| Er1 | Communication failure, electronic panel cannot receive signal | (1) Check if the communication cable is loose, disconnected, or damaged. (2) Check or replace the electronic panel if necessary. (3) Check or replace the controller if necessary. |
| Er3 | Overvoltage | (1) Check if the power supply voltage is at the normal level of AC 120V/220V. (2) Check or replace the controller. (3) Check or replace the motor. |
| Er4 | Overcurrent | (1) Check the overcurrent status. (2) Check if any mechanical moving parts are stuck. (3) Check the release agent level. Insufficient release agent will increase the friction between the running belt and the running board, causing overcurrent. (4) Check if the running board is severely worn. (5) Check if the running belt is severely worn. (6) Check if there is a short circuit in the motor circuit. (7) Check or replace the controller. (8) Check or replace the motor. |
| Er5 | Overload | (1) Check the overload status. (2) Check if any mechanical moving parts are stuck. (3) Check the release agent level. Insufficient release agent will increase the friction between the running belt and the running board, causing overcurrent. (4) Check if the running board is severely worn. (5) Check if the running belt is severely worn. (6) Check if there is a short circuit in the motor circuit. (7) Check or replace the controller. (8) Check or replace the motor. |
| Er6 | Motor not connected | (1) Check if the motor circuit is loose or disconnected. (2) Check or replace the controller. (3) Evaluate whether the controller needs to be replaced. |
| Er7 | The controller receives no signal | (1) Check for loose, disconnected or damaged communication cables. (2) Check or replace the electronic panel. (3) Check or replace the controller. |
| Er13 | IGBT Short Circuit | (1) Determine if the treadmill is severely interfered with by external signals. (2) Check or replace the controller if necessary. |
| Er14 | Load Short Circuit | (1) Check if there is any foreign object at the controller output that causes a short circuit. (2) Check or replace the motor. |
| Er21 | Relay malfunction | Check or replace the controller. |
8. Specifications
Below are the technical parameters for various models within the BA series. Please refer to your product's packaging to identify your specific model.
BA05 Series (Model 1)

| Parameter | C5-Mini / BA05-A | C5-Mini-A2 / BA05-A2 | C5-Normal / BA05-B1 | C5-Normal-B2 / BA05-B2 | C5-Pro / BA05-C |
|---|---|---|---|---|---|
| Max Load (lbs/kg) | 250/113 | 250/113 | 300/136 | 300/136 | 350/159 |
| Product Size (inches/mm) | 38.78*20.17*4.17/ 985*512.4*106 | 38.78*20.17*4.17/ 985*512.4*106 | 42.72*20.17*4.17/ 1085*512.4*106 | 42.72*20.17*4.17/ 1085*512.4*106 | 46.65*20.17*4.17/ 1185*512.4*106 |
| Running Area (inches/mm) | 15.35*31.50/ 390*800 | 15.35*31.50/ 390*800 | 15.35*35.43/ 390*900 | 15.35*35.43/ 390*900 | 15.35*39.37/ 390*1000 |
| Speed (mph/kph) | 0.6-3.8/ 1-6 | 0.6-2.5/ 1-4 | 0.6-3.8/ 1-6 | 0.6-3.8/ 1-6 | 0.6-5.0/ 1-8 |
| Net Weight (lbs/kg) | 37.92/17.20 | 37.92/17.20 | 40.12/18.20 | 40.12/18.20 | 42.55/19.30 |
BA05 Series (Model 2)

| Parameter | C5-Mini / BA05-A | C5-Mini-A2 / BA05-A2 | C5-Normal / BA05-B1 | C5-Normal-B2 / BA05-B2 | C5-Pro / BA05-C |
|---|---|---|---|---|---|
| Max Load (lbs/kg) | 250/113 | 250/113 | 300/136 | 300/136 | 350/159 |
| Product Size (inches/mm) | 38.78*20.17*4.69/ 985*512.4*119 | 38.78*20.17*4.17/ 985*512.4*106 | 42.72*20.17*4.69/ 1085*512.4*119 | 42.72*20.17*4.69/ 1085*512.4*119 | 46.65*20.17*4.69/ 1185*512.4*119 |
| Running Area (inches/mm) | 15.35*31.50/ 390*800 | 15.35*31.50/ 390*800 | 15.35*35.43/ 390*900 | 15.35*35.43/ 390*900 | 15.35*39.37/ 390*1000 |
| Speed (mph/kph) | 0.6-3.8/ 1-6 | 0.6-2.5/ 1-4 | 0.6-3.8/ 1-6 | 0.6-3.8/ 1-6 | 0.6-5.0/ 1-8 |
| Net Weight (lbs/kg) | 39.68/18 | 37.92/17.20 | 40.80/18.50 | 40.80/18.50 | 42.65/19.35 |
BA06 Series

| Parameter | C6-Ultra-Mini/ BA06-S | C6-Mini / BA06-A | C6-Mini-A2 / BA06-A2 | C6-Normal / BA06-B1 | C6-Normal-B2 / BA06-B2 | C6-Pro / BA06-C |
|---|---|---|---|---|---|---|
| Max Load (lbs/kg) | 250/113 | 250/113 | 250/113 | 300/136 | 300/136 | 350/159 |
| Product Size (inches/mm) | 30.63*20.24*4.13/ 778*514*105 | 38.5*20.24*4.13/ 978*514*105 | 38.5*20.24*4.13/ 978*514*105 | 42.44*20.24*4.13/ 1078*514*105 | 42.44*20.24*4.13/ 1078*514*105 | 46.38*20.24*4.13/ 1178*514*105 |
| Running Area (inches/mm) | 15.35*23.62/ 390*600 | 15.35*31.50/ 390*800 | 15.35*31.50/ 390*800 | 15.35*35.43/ 390*900 | 15.35*35.43/ 390*900 | 15.35*39.37/ 390*1000 |
| Speed (mph/kph) | 0.6-1.9/ 1-3 | 0.6-3.8/ 1-6 | 0.6-2.5/ 1-4 | 0.6-3.8/ 1-6 | 0.6-3.8/ 1-6 | 0.6-5.0/ 1-8 |
| Net Weight (lbs/kg) | 32.19/14.6 | 37.94/16.8 | 37.94/16.8 | 38.34/17.39 | 38.34/17.39 | 41.07/18.63 |
BA Jogging Series (BA Ultra Slow Running Series)

| Parameter | BA09-A | BA10-A |
|---|---|---|
| Max Load (lbs/kg) | 250/113 | 250/113 |
| Product Size (inches/mm) | 38.66*19.61*3.94/ 982*498*100 | 38.68*19.69*3.94 / 982.5*500*100 |
| Running Area (inches/mm) | 15.35*31.50/ 390*800 | 15.35*31.50/ 390*800 |
| Speed (mph/kph) | 0.6-2.5/ 1-4 | 0.6-2.5/ 1-4 |
| Net Weight (lbs/kg) | 32.63/14.8 | 31.31/14.2 |
Note: The above data is manually measured and may have some deviations. Please refer to the actual product received.
9. User Tips
- Initial App Setup: While the treadmill can be used without the app after initial setup, some users found the app setup to be a bit involved. Ensure you follow the app instructions carefully for the first-time connection.
- Quiet Operation: Many users praise the quiet motor, making it suitable for use in shared living spaces or while working.
- Sturdy and Portable: The treadmill is noted for being robust and easy to move thanks to its built-in wheels.
- Size Consideration: Taller individuals (e.g., 5'9") might find the running belt length requires some concentration to stay centered. Consider the running area dimensions in the specifications if you are tall.
- Power Issues: One user reported the treadmill tripping electric fuses. If this occurs, check your home's electrical circuit capacity and ensure the treadmill is plugged into a dedicated, grounded outlet as per safety precautions.
- EMF Interference: A user reported strange EMF interference on their monitor and USB devices when using the walking pad. If you experience this, try to increase the distance between the treadmill and sensitive electronics, or use a surge protector.
10. Warranty and Support
This product is exclusively intended for domestic applications. Any anomalies associated with commercial usage will not be subject to our warranty coverage.
If you experience any issues with the functionality of your product, kindly liaise with your local distributor regarding customer support.
Contact Information:
- US Support Service: +1 888-589-0777
- US Email: support@deerruntreadmill.com
- UK Support Service: +44 0800 048 8422
- UK Email: support@deerruntreadmill.com
- EU Email: support@deerruntreadmill.com
WEEE Compliance (EU)
The crossed-out wheeled bin symbol indicates that you are obliged by law to dispose of this equipment separately from unsorted municipal waste. Do not dispose of it in residual waste bins. If the equipment contains portable batteries, accumulators, or lamps that are not permanently installed, these must be removed and disposed of separately. Owners of waste electrical and electronic equipment can return them to designated facilities or collection points provided by producers, retailers, or distant sellers. For more information on collection and take-back sites, please visit: https://e-schrott-entsorgen.org/
Owners are responsible for deleting all personal data from the waste electrical and electronic equipment to be disposed of.

11. Frequently Asked Questions (FAQ)
- Q: Can I use the app or just the remote? Does it come with a warranty?
- A: You can use both the app and the remote control. The app is primarily for initial setup and enhanced tracking, while the remote is for basic operation. The product is intended for domestic use and comes with a warranty for such use. Please contact support for specific warranty details.
- Q: What is the carrying capacity?
- A: The treadmill has a maximum load capacity of 300 lbs (136 kg) for most models. Please refer to the specifications table for your specific model's capacity.