Ubricks MC001 RC Electric Anti-aircraft Tank Instruction Manual

Introduction

Thank you for choosing the Ubricks MC001 RC Electric Anti-aircraft Tank building block toy. This manual provides essential information for the assembly, operation, and maintenance of your model. Please read it thoroughly before use to ensure proper function, safety, and to maximize your enjoyment.

Figure 1: Ubricks MC001 RC Electric Anti-aircraft Tank

Safety Warnings

• CHOKING HAZARD: This product contains small parts and is not suitable for children under 3 years of age. Adult supervision is highly recommended during assembly and operation.
• This product contains a Lithium battery. Handle with care. Do not puncture, heat, or expose to water. Follow all local regulations for battery disposal.
• Do not aim the bullet launcher at people, animals, or fragile objects. Always ensure a clear and safe firing range.
• Keep the product away from water, moisture, and extreme temperatures to prevent damage to electronic components.
• Ensure all building block connections are firm and secure before operating the RC vehicle to prevent parts from detaching.
• California Proposition 65 Warning: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Package Contents

Your Ubricks MC001 package should contain the following items:

• Building blocks for the Anti-aircraft Tank (approx. 600 pieces)
• 2.4G Remote Control unit
• Rechargeable Lithium Battery
• Charging Cable
• Bullet Clips (2 pairs, each holding 5 bullets)
• 20 Bullets
• Instruction Card (with QR code for digital assembly instructions)

Figure 2: Complete Accessories - Bullet Clips and Lithium Battery

Assembly Instructions

The Ubricks MC001 is a building block kit. Detailed assembly instructions are provided digitally. Please scan the QR code on the included instruction card to access the step-by-step guide.

1. Unpack all components and verify them against the package contents list.
2. Sort the building blocks by type and color to facilitate the assembly process.
3. Follow the digital instructions carefully to construct the Anti-aircraft Tank. Pay close attention to the orientation of parts.
4. Ensure all connections are firm and secure as you build. Loose connections can affect the tank's stability and functionality.
5. Install the rechargeable Lithium battery into its designated compartment only after the main structure is complete and all wiring (if any) is connected according to the digital instructions.

Charging the Battery

The Anti-aircraft Tank is powered by a rechargeable Lithium battery. Proper charging ensures optimal performance and battery longevity.

1. Connect the charging cable to the Lithium battery.
2. Plug the other end of the charging cable into a suitable USB power source (e.g., computer USB port, USB wall adapter).
3. Allow the battery to charge fully before first use. Charging time may vary depending on the power source and battery level.
4. Do not overcharge the battery. Disconnect the charging cable once the battery is fully charged.

Operating Instructions

Remote Control Functions

The 2.4G Remote Control allows for easy and interference-free operation of multiple tank functions.

Figure 3: 2.4G Remote Control Layout and Functions

• Left-forward / Right-forward: Controls the forward movement of the left and right tracks, respectively.
• Left-back / Right-back: Controls the backward movement of the left and right tracks, respectively.
• Adjust the Turret: Controls the vertical angle of the anti-aircraft gun.
• Shoot Bullets: Activates the bullet firing mechanism for single or continuous shots.
• Indicator: Provides visual status feedback for the remote control.

Special Maneuver: To rotate the tank 360° in place, press the forward button on one side and the backward button on the opposite side simultaneously.

Driving the Tank

The tank features an ingenious crawler base designed for flexible steering and strong passability across various terrains.

Figure 4: Simulated Base Flexible Steering

• Use the forward/backward controls to move the tank in a straight line.
• Combine left and right track controls for precise steering and turning.
• The optimized structure, featuring curved edges and a 2.2cm high chassis, enhances the tank's ability to overcome obstacles and navigate challenging landscapes.

Figure 5: Strong Passability Features

Firing Bullets

The tank is equipped with a wide firing range and an adjustable 40° angle for engaging targets.

Figure 6: Wide Firing Range with Adjustable Angle

1. Load the bullet clips with the provided bullets. Each clip holds 5 bullets.
2. Insert the loaded bullet clips securely into the anti-aircraft gun's firing mechanism.
3. Use the "Adjust the Turret" control on the remote to set the desired firing angle (up to 40°).
4. Press the "Shoot Bullets" button on the remote for single or continuous shots to knock down targets.

Figure 7: Shooting Challenges - Single/Continuous Shot

Product Demonstration Video

Maintenance

• Cleaning: Regularly wipe the tank and remote control with a dry, soft cloth to remove dust and debris. Do not use water, harsh chemicals, or abrasive cleaning agents.
• Battery Care:
  • Always fully charge the Lithium battery before storing the product for an extended period.
  • If the product is not used for more than three months, charge the battery every 3 months to maintain its lifespan and prevent deep discharge.
  • Do not expose the battery to extreme temperatures (hot or cold) as this can degrade performance and safety.
• Storage: Store the product in a cool, dry place, away from direct sunlight and out of reach of small children.
• Part Inspection: Periodically inspect all building block connections and moving parts for any signs of wear or looseness. Re-secure or replace as necessary.

Troubleshooting

Specifications

Figure 8: Product Dimensions

User Tips

• For optimal performance and extended play sessions, always ensure the Lithium battery is fully charged before each use.
• When assembling, take extra care to firmly press all self-locking bricks together. This ensures the structural integrity of the tank and prevents parts from detaching during dynamic movements.
• Experiment with the unique 360° steering in place feature by simultaneously pressing the forward button on one side and the backward button on the opposite side of the remote control for impressive maneuvers.
• The tank's advanced suspension system provides excellent shock absorption. Don't hesitate to test its strong passability on various indoor terrains, but avoid excessively rough or wet surfaces.

Warranty and Support

For any issues regarding defective parts, wrong parts received, or missing components, please contact customer support immediately. To expedite the process, provide a detailed list of the parts needed.

A replacement patch for missing or defective parts will be provided free of charge for one instance. Please note that due to the very high cost of international freight, returns for minor part issues are generally not accepted; instead, replacement parts will be dispatched.