NICEHCK NX8

Contents

NICEHCK NX8 HiFi Earphone User Manual

Model: NX8

1. Product Information

The NICEHCK NX8 is a HiFi in-ear earphone designed for personal audio listening. It features an 8-driver hybrid configuration per side (1DD+6BA+1PZT) and a high-precision 3D printed resin cavity. The earphones are intended for connection to compatible audio devices such as smartphones, music players, DACs, amplifiers, or computers for sound playback.

Product Name: NICEHCK HiFi In-ear Earphone
Brand: NICEHCK
Model: NX8 (also known by YD520, X39, StringSnow, Tears, DB2, NX7 MK4, F1 Pro, HIMALAYA, NX8 Special Edition, Rockies)
Batch Number: HCKX-EJ001

NICEHCK NX8 HiFi Earphones

NICEHCK NX8 HiFi Earphones with starry texture faceplate.

2. Safety & Warnings

▲ Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in product damage, hearing damage, or personal injury.

Warnings:

  • Keep the volume at a safe level to protect your hearing.
  • Never plug the earphones directly into a power outlet.
  • Children should use this product only under adult supervision.
  • Do not use the earphones while driving, cycling, riding an electric scooter, or walking on the road to avoid traffic accidents.
  • Avoid prolonged use in high-temperature or high-humidity environments to prevent damage and shorten the product's lifespan.
  • Store the earphones and accessories properly to maintain optimal performance.

3. Setup and Operation

Initial Setup:

  1. Burn-in Period: For optimal sound quality, it is recommended to 'burn-in' the earphones for at least 50 hours. This allows the diaphragm to reach a maturely stable status.
  2. Connecting the Cable: The NX8 features a 0.78mm 2Pin detachable design. To connect the cable, align the pins and insert the earphone and cable in a straight, parallel motion. Avoid twisting or rocking the connector sideways or up and down to prevent pin damage.
  3. Identifying Left and Right: The earphone shells are marked with “L” for the left ear and “R” for the right ear near the cable connectors. Ensure you connect each earphone to its corresponding channel.
  4. Eartip Selection: Choose the silicone eartips that best fit your ears. A proper fit ensures comfort, a secure seal to minimize sound leakage, and optimal low-frequency performance.
NX8 Earphones connected to a digital audio player

NX8 Earphones connected to a digital audio player, showcasing the detachable cable.

Detachable 0.78mm 2Pin cable connection

Close-up of the 0.78mm 2Pin detachable cable connection, enhancing flexibility.

General Operation:

Connect the earphone cable to your audio source (smartphone, music player, DAC, amplifier, or computer). Adjust the volume to a comfortable and safe listening level. The NX8 is designed to provide a full soundstage with excellent frequency response.

Product overview video showcasing the NX8 earphones and their features.

4. Maintenance

  • Cleaning: Regularly clean the driver housing and mesh with a soft, dry cloth or a soft-bristled brush. Gently remove any debris from the driver mesh without pushing it deeper.
  • Cable Care: Wipe the cable with a slightly damp cloth and dry it immediately.
  • Storage: Store the earphones in a protective case when not in use to prevent damage and prolong their lifespan.
  • Avoid Chemicals: Do not use chemical cleaners or expose the earphones to water.
  • Connector Lifespan: Avoid excessively plugging and unplugging the earphone connector during use, as this may reduce its lifespan.
  • Plug Cleaning: Periodically clean the earphone plug to prevent poor contact caused by dirt or debris.
NX8 Earphone packaging and accessories

The NX8 comes with a protective carrying case for safe storage.

5. Troubleshooting

  • No Sound or Intermittent Audio:
    • Ensure the cable is securely connected to both the earphones and the audio source.
    • Check the L/R markings on the earphone shells to ensure they are connected to the correct channels.
    • Clean the earphone plug and the audio source's jack to remove any dirt or debris that might be causing poor contact.
    • Test with a different audio source or cable to rule out issues with other equipment.
  • Poor Sound Quality (e.g., lack of bass, tinny sound):
    • Verify that the eartips are properly seated and provide a good seal in your ear canal. An improper seal can lead to sound leakage and reduced low-frequency response.
    • Ensure the acoustic tubes are clear of earwax or debris. The NX8 features replaceable acoustic tubes; if blocked, they can be replaced.
    • Check the audio settings on your device (equalizer, volume levels).
  • Discomfort or Poor Fit:
    • Experiment with the different sizes and types of ear tips provided (NICEHCK C04 for expansive soundstage, NICEHCK 07 for balanced dynamic sound) to find the most comfortable and secure fit.
Replaceable Acoustic Tubes Design

The NX8 features a replaceable acoustic tube design, allowing for easy maintenance and sound customization.

Two sets of ear tips for diverse listening needs

Two sets of ear tips are included to ensure a comfortable fit and optimal sound.

6. Specifications

FeatureSpecification
Brand NameNICEHCK
ModelNX8
Product TypeIn-ear Monitor
Driver Unit1DD+6BA+1PZT Hybrid
Impedance19Ω
Sensitivity111dB/mW
Frequency Response Range20 - 30000Hz
Plug3.5mm/4.4mm (Line Type)
Connector0.78mm 2Pin
CableOCC+silver plated mixed
Cavity MaterialResin
MaterialMetal
Headphone Pads MaterialSilicone
With MicrophoneNo
WaterproofNo
CommunicationWired
StyleWired in-ear headphones
Package ListUser Manual, Carrying Bag, Replaceable Pads Set, Detachable Audio Cable
Diagram of NX8 Eight Drivers Hybrid Configuration

Detailed diagram of the NX8's eight-driver hybrid configuration, including 10mm Titanium-coated Dual Magnetic Dynamic, Self-designed Crossover Board, Professional BA Drivers, PZT Driver Unit, and 3D Printed Resin Cavity.

NX8 Frequency Response Graph

Frequency response graph illustrating the NX8's professional optimization for exceptional three-frequency experience.

7. User Tips

  • Optimal Sound: Many users find that a 'burn-in' period of at least 50 hours significantly improves the sound quality, allowing the drivers to settle.
  • Enhanced Experience: Consider purchasing and installing additional filters, as some users report a 30% increase in satisfaction with their sound.
  • Comfortable Fit: The NX8's shell is designed to be small and comfortable. Experiment with the included ear tips to achieve the best fit for your ears, which is crucial for both comfort and sound quality.
  • Sound Profile: While designed for a balanced sound, some users perceive a slightly bass-oriented profile, with clear and refreshing sound across all frequencies.

8. Warranty and Support

For any product inquiries, technical support, or warranty claims, please contact the manufacturer or their authorized representative using the information below.

Manufacturer Information:

Manufacturer: Shenzhen Huachuang Kexin Electronic Technology Co.,Ltd.
Address: LiXinLu No.2 FuYongJiChuangMaTou 309, FuHaiJieDao, BaoAn, Shenzhen, Guangdong, China
Email: support@nicehck.com
Website: https://nicehck.cn

EU Authorized Representative:

Company Name: XDH Tech
Address: 37 passage du Ponceau Bureau 270, Paris, France
Email: xdh.tech@outlook.com
Telephone: 33652768898

A detailed user manual in PDF format is also available for download: NICEHCK NX8 User Manual (PDF)

Compliance markings including CE, RoHS, UKCA

Compliance markings for the product.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.