1. Introduction
This manual provides essential instructions for the safe and efficient operation of your Feyree 11kW Type2 16A 3Phase Portable EV Charger. Please read this manual thoroughly before use and keep it for future reference. This charger features Wi-Fi and Bluetooth connectivity for smart app control, allowing for real-time monitoring, scheduled charging, and adjustable current settings.

Feyree 11kW Type2 16A 3Phase Portable EV Charger with CEE plug and Type 2 connector
2. Safety Warnings
WARNING! Failure to follow these warnings may result in serious injury or death.
- Do NOT immerse the AC charging connection device in water.
- Do NOT step on, pull, bend, or knot the charging cable.
- Do NOT insert foreign objects into any part of the Charging vehicle connector.
- Refrain from dropping the control box or placing heavy objects on its surface.
- Do NOT install or use the charger near flammable, explosive, harsh, or combustible materials, chemicals, or vapors.
- Ensure the operating ambient temperature of the equipment remains within the range of -30 °C to +55 °C.
- Do NOT use the charger when you, the vehicle, or the charger is exposed to severe rain.
- Do NOT use the charger if it is defective, appears cracked, frayed, broken, otherwise damaged, or fails to operate.
- Do NOT use this product if the enclosure or the EV connector is broken, cracked, open, or shows any other indication of damage.
- Do NOT attempt to open, disassemble, repair, tamper with, or modify the charger.
- This product is exclusively designed for electric vehicle charging purposes.
- Avoid using external wires or adapters.
- This product must be well-grounded when used.
- Never insert your fingers into the charging plug.
- The EV charger is not user serviceable. Contact customer support for any repairs.
- If the device fails to charge normally as per the operation manual, please contact the seller or consider a replacement.
- Never allow children to play with the charger cable.
- To avoid the risk of fire or electric shock, do not use this device with an extension cord.
- Using a worn or damaged AC outlet may cause burns or start a fire.
- Risk of explosion. This equipment has an arc or sparking parts that should not be exposed to flammable vapors.
- Risk of electric shock. Do not remove the cover or attempt to open the enclosure of the charger unit. No user-serviceable parts inside. Refer servicing to qualified service personnel.
3. Precautions Before Charging
CAUTION!
- It is recommended that electrical outlets for your charger should be installed by a licensed and qualified electrician. To avoid serious injury or death, installation must comply with local codes.
- This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to help reduce the risk of electric shock.
- Ensure the power plug and socket are compatible before initiating the charging process.
- Do not charge if the socket is damaged, rusty, cracked, or has a loose connection. In case the socket is dirty or wet, please disconnect the power supply first. Wipe the charging plug with a dry and clean cloth to ensure it is dry and free from any debris.
- Verify that the charging connector, cable, control box, and plug surface are in good condition without any scratches, rust, breaks, or damages.
4. Product Overview
4.1. Unboxing and Components
Video: Unboxing and overview of the Feyree Portable EV Charger components.
4.2. Control Box and LCD Display
The control box features a 2.8-inch LCD screen and three buttons (A, D, T) for manual control and settings adjustment. The display provides real-time charging status and parameters.

Smart LCD and Button Functions: A (Adjust Current), D (Set Delay Time), T (Set Charging Time / Enter Menu)
LCD Display Information (11kW/22kW 3-Phase Example):

Real-time display of charging parameters including temperature, voltage, current, power, charging time, and delay time.
- Device Status: Current temperature (e.g., 31°C), Feyree logo, Wi-Fi/Bluetooth status.
- Current: Displays the set charging current (e.g., 16A).
- Voltage: L1, L2, L3 voltage readings (e.g., 220.6V).
- Current per Phase: L1, L2, L3 current readings (e.g., 0.0A).
- Power: Real-time power consumption (e.g., 0.00kW).
- Energy: Total energy consumed (e.g., 0.00kWh).
- Delay Time: D:00h (Delay hours).
- Charging Time: T:00h (Total charging hours).
4.3. Dimensions

Control Box Dimensions: 100mm (width) x 227mm (length) x 56.5mm (thickness).
5. Specifications
This Feyree portable EV charger is designed for efficient and safe charging of electric vehicles. Below are the detailed specifications:

Key specifications for the 11kW 16A 3Phase model.
| Feature | Specification |
|---|---|
| Power (W) | 11kW Max |
| Current | 8A-10A-13A-16A Adjustable (16A max) |
| Number of phases | 3 phase |
| Voltage | 380V (for 3-phase), 85V-264V (for 1-phase) |
| Charging Type | Type2 IEC 62196-2 |
| Plug Type | CEE Plug |
| Cable Length | 5m |
| IP Rating (Charger Plug) | IP66 |
| IP Rating (Charger Box) | IP66 |
| IP Rating (CEE Plug) | IP55 |
| Operating Temperature | -30 °C ~ +55 °C |
| Storage Temperature | -40 °C ~ +80 °C |
| Leakage Protection | TypeB AC 30mA + DC 6mA |
| Wireless Support | Wi-Fi, Bluetooth |
| Material | Copper alloy, silver plating (for pins), TPU (cable) |
| Weight | 3.3KG |
| Dimensions (Control Box) | 100mm (W) x 227mm (L) x 56.5mm (H) |
5.1. CEE Plug Types
Two types of CEE plugs may be available, Model A and Model B. Both are compatible with the charger.

Model A and Model B CEE plugs with dimensions.
6. Setup
6.1. Initial Connection
- Ensure the electrical outlet is installed by a qualified electrician and is properly grounded.
- Verify that the charger components (cable, connectors, control box) are free from any damage.
- Connect the CEE plug of the charger to a compatible 3-phase CEE socket.
- Connect the Type 2 connector to your electric vehicle's charging port.
6.2. App Installation and Device Pairing
- Download the "Tuya Smart" or "Smart Life" app from your mobile device's app store. The app icon is typically a house or a 'tuya' logo.
- Enable Wi-Fi and Bluetooth on your smartphone.
- Open the app and select "Add Device".
- The app will search for nearby devices. Ensure your charger is powered on and in pairing mode (refer to the LCD display for pairing status).
- When prompted, enter your Wi-Fi network name and password.
- Follow the on-screen instructions to complete the device pairing. Once successfully added, the charger will appear in your app's device list.

App interface for setting weekly charging plans and schedules.

The app can also be used via hotspot/Bluetooth within 10 meters if Wi-Fi is unavailable (requires SIM card signal).
7. Operating Instructions
7.1. Manual Control (Control Box Buttons)
The control box has three buttons: A, D, and T.
- Button A (Adjust Current): Short press to cycle through available current settings (8A, 10A, 13A, 16A). This can only be adjusted when the charger is not actively charging.
- Button D (Set Delay Time): Short press to adjust the delay time (0-15 hours) before charging starts.
- Button T (Set Charging Time / Menu): Short press to set the desired charging duration. Long press (for 10 seconds) to enter the menu page for advanced settings.

Smart LCD and Button Functions: A (Adjust Current), D (Set Delay Time), T (Set Charging Time / Enter Menu)
7.2. App Control (Wi-Fi/Bluetooth)
The Feyree charger can be fully controlled and monitored via the Tuya Smart or Smart Life app.
- Real-time Monitoring: View current temperature, voltage, current per phase, real-time power, total energy consumed, delay time, and charging time directly from the app.
- Adjust Current: Easily adjust the charging current (8A-16A) from the app interface.
- Set Delay/Timed Charging: Schedule charging to start at a specific time or for a specific duration, ideal for off-peak charging.
- Start/Stop Charging: Initiate or terminate the charging process remotely.

App Remote Control: Real-time Monitoring, Remote Control Delay/Timed Charging, Remote control Start/End Charging.

Seamless control and monitoring via the smartphone app.
8. Charging Steps
8.1. Adjust Current
Tap button "A" on the control box or use the app to adjust the current before charging. The charging current set shouldn't be higher than the supply current, otherwise there may be a safety hazard.

Adjustable current settings (8A-16A) and estimated miles per hour.
8.2. Plug in the Charging Connector
Connect the charging plug to the EV (Start Charging).
8.3. End Charging
Do NOT unplug during charging without stopping the process first.
- PLAN A (Automatic Stop): The charger will automatically stop charging when the car is fully charged. You can then directly unplug the connector.
- PLAN B (Power Switch): Turn off the power switch of the electrical outlet to end charging, then unplug the charger.
- PLAN C (Vehicle Control): Stop charging from the electric vehicle itself (usually via a button or touch screen in the car). Then unplug the charger plug.
- PLAN D (App Control): Click "Stop charging" on the app, and then pull out the charger plug.

Automatic stop charging feature protects the car's battery.
9. Maintenance
- Regularly inspect the charging cable, connectors, and control box for any signs of wear, damage, or corrosion.
- Keep the charger clean and free from dust and debris. Use a dry, soft cloth for cleaning. Do not use abrasive cleaners or solvents.
- Ensure the charging environment is dry and well-ventilated.
- Store the charger in a cool, dry place when not in use, away from direct sunlight and extreme temperatures.
- Do not attempt to repair or modify the charger yourself. Any unauthorized modifications will void the warranty and may pose safety risks.

High-quality materials ensure durability and safety.
10. Troubleshooting
If you encounter issues with your charger, refer to the table below for common problems and recommended solutions.
| Fault Name | Reason for Failure | Recommendations |
|---|---|---|
| Over Voltage | AC input voltage is too high | 1. Have an electrician measure the input voltage of the charger's power distribution box. 2. If voltage is over 264V for a short time, wait for the system to restore. If long-term, contact local power supply department. 3. If the electrical system voltage is less than 264V, contact us. |
| Under Voltage | AC input voltage is too low | 1. Have an electrician measure the input voltage of the charger's power distribution box. 2. If voltage is less than 85V for a short time, wait for the system to restore. If long-term, contact local power supply department. 3. If the electrical system voltage is over 85V, contact us. |
| Over Current | AC input current is too high | 1. Cut off power to the charger's power distribution box immediately. 2. Check the charging plug for foreign objects and the car's on-board charger for abnormalities. 3. After troubleshooting, reconnect power supply. If fault persists, contact us. |
| Over TEMP | Charger internal temperature greater than 85°C | 1. Ensure no other heat-generating equipment is near the charging station and ambient temperature is below 50°C. 2. If problem persists, contact us. |
| Elec leakage | Leakage is greater than specified values (TypeA: AC20/30mA, TypeB: AC30mA+DC6mA) | 1. Cut off power to the charger's power distribution box immediately. 2. Check the charging plug for foreign objects and the car for electrical leakage. 3. After troubleshooting, reset leakage protector, reconnect power. If fault persists, contact us. |
| Leakage self check | The sensor for detecting leakage is abnormal | 1. Cut off power to the charger's power distribution box immediately. 2. Check whether the output cable of the charging station is broken or connected to ground. 3. After troubleshooting, reconnect power. If fault persists, contact us. |
| PE Fault | Poor grounding or incorrect wiring | 1. Cut off power to the charger's power distribution box immediately. 2. Check if the charging station is grounded properly. 3. After troubleshooting, reconnect power. If fault persists, contact us. |
| Err:cp | Charging plug CC/CP connection abnormality | 1. Check if the wiring of the charging plug is correct. 2. After troubleshooting, if the fault still exists, please contact us. |
10.1. Resetting Wi-Fi Connection

Steps to reset Wi-Fi connection using the control box buttons.
- Long press button "T" to enter the Menu.
- Press "A" to select "Settings", then press "D" to enter.
- Press "A" to select "Reset Wifi", then press "D" to confirm reset.
11. User Tips
- App Control Convenience: Using the mobile app for current adjustment is more convenient as it allows changes remotely without stopping the charging process.
- Cable Length Consideration: The cable from the 3-phase 16A plug to the housing is relatively short. Consider this for mounting options; direct wall-mounted sockets are ideal.
- Minimum Current: The charger's minimum adjustable current is 8A. Plan your charging needs accordingly.
- Consumption Readings: Be aware that the charger's displayed energy consumption might slightly differ from your household electricity meter.
12. Frequently Asked Questions (FAQ)
- Q: Is this charger 380V or 220V?
- A: The 3-phase version operates at 380V. For single-phase use, it supports 85V-264V.
- Q: Is the charger available with a 7m or 10m cable?
- A: This model comes with a 5-meter cable. Other lengths may not be available for this specific product variant.
13. Warranty and Support
13.1. Customer Service
For any product-related issues or inquiries, please contact Feyree customer service:
- E-mail: tina@feyree.com
13.2. Warranty
- Two-Year Warranty: Feyree offers a two-year warranty to customers who purchase an original Feyree product.
- Lifetime Technical Support: In case of any product-related issues, we encourage you to reach out to us, providing pictures and videos for further assistance.
13.3. Exclusions
The warranty does not cover:
- Any product damage resulting from failure to follow the recommended guidelines.
- Damage caused by unauthorized disassembly of the machine or seeking maintenance from a non-designated service center.
- Purchased not original Feyree products.
- Any modifications or do-it-yourself alterations carried out without guidance from a licensed electrician.
14. FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference; (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and uses can radiate radio frequency energy, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user's authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC's RF exposure guidelines, the distance must be at least 20cm between the radiator and your body, and fully supported by the operating and installation configurations of the transmitter and its antennas.
15. App Download
Scan the QR codes below to download the "Tuya Smart" or "Smart Life" app for your device.

Tuya Smart App

Smart Life App