1. Introduction
Thank you for choosing the Ohayo X3 Portable Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker. The Ohayo X3 is designed to deliver high-quality audio with powerful features, making it ideal for various indoor and outdoor activities.
Key Features:
- 40W High-Powered Audio: Experience deep bass and clear sound.
- RGB Colorful Lights: Dynamic lighting effects that sync with your music.
- TWS Pairing: Connect two Ohayo X3 speakers for true stereo sound.
- IPX7 Waterproof Protection: Fully protected against water immersion, suitable for harsh environments.
- Tri-Bass EQ Effects: Switch between Extra Bass, Transparency, and Standard modes.
- Multiple Connectivity: Supports Bluetooth 5.3, TF Card, AUX in, and USB drives.
- Built-In Microphone: For convenient hands-free calling.
- Extended Playtime: Up to 18 hours of music playback on a single charge.

2. Package Contents
Ensure all items are present in the box:
- 1 x Ohayo X3 Bluetooth Speaker
- 1 x User Manual
- 1 x Type-C Charging Cable
- 1 x 3.5mm Audio Cable

3. Specifications
| Model | Ohayo X3 |
| Bluetooth Version | 5.3 |
| Bluetooth Profile | A2DP V1.3, AVRCP V1.4, HFP V1.6 |
| Audio Codec | SBC |
| Bluetooth Range | Up to 20m / 66ft (open area) |
| IP Rating | IPX7 Waterproof |
| Output Power | 40W |
| Input Power | Type-C 5V/2A |
| Frequency Range | 80Hz – 20kHz |
| Battery Capacity | 6600mAh |
| Playtime | Up to 18 Hours (at 30% volume) |
| Charging Time | 3 Hours |
| Dimensions (H x W x D) | 122mm x 101mm x 101mm (4.80in x 3.97in x 3.97in) |
| Weight | 720 ± 10g (1.59 lbs) |
| Signal-to-Noise Ratio | 80 dB |
| Material | Plastic, Metal |
| Control | Volume control, Playback, EQ, Input selector |
| Sound Modes | Extra Bass Mode, Transparency Mode, Standard Mode |
| Built-in Microphone | Yes |
| Support Memory Card | Yes (TF Card) |
4. Setup Guide
4.1. Charging the Speaker
Before first use, fully charge your Ohayo X3 speaker.
- Open the protective flap on the side of the speaker to reveal the charging port.
- Connect the provided Type-C charging cable to the speaker's Type-C port.
- Connect the other end of the cable to a 5V/2A USB power adapter (not included).
- The charging indicator light will show the charging status. A full charge takes approximately 3 hours.
- Once fully charged, disconnect the cable and securely close the protective flap to maintain IPX7 waterproof rating.

4.2. Power On/Off
- To Power On: Long press the Power button (
) for 3 seconds. You will hear an audible prompt "Bluetooth" and the RGB light will illuminate. - To Power Off: Long press the Power button for 3 seconds.
4.3. Bluetooth Pairing
- Power on the speaker. It will automatically enter Bluetooth pairing mode, indicated by a flashing blue RGB light.
- On your mobile device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
- Select "Ohayo X3" from the list of devices.
- Once connected, you will hear a confirmation sound, and the blue light will become solid or change to a different pattern.
Note: The speaker will automatically try to reconnect to the last paired device when powered on.
4.4. TWS (True Wireless Stereo) Pairing
To achieve a more immersive stereo sound experience, you can pair two Ohayo X3 speakers together.
- Ensure both Ohayo X3 speakers are powered on and not connected to any other Bluetooth device.
- On one of the speakers (this will be your primary speaker), double-click the Play/Pause button (
). The speaker will enter TWS pairing mode. - The two speakers will automatically connect to each other. You will hear a confirmation tone once TWS pairing is successful.
- Now, connect your mobile device to the primary speaker via Bluetooth as described in section 4.3.

5. Operating Instructions
The Ohayo X3 speaker features intuitive controls for easy operation. Refer to the diagram below for button functions:

5.1. Button Functions:
- Power Button (
):- Long Press (3 seconds): Power On/Off.
- Play/Pause Button (
):- Short Press: Play/Pause music, Answer/Hang up calls.
- Twice Press: Enter TWS Pairing Mode.
- Volume Up (+) Button:
- Short Press: Increase volume.
- Long Press: Next song.
- Volume Down (-) Button:
- Short Press: Reduce volume.
- Long Press: Previous song.
- EQ Button:
- Short Press: Change EQ (3D/Extra Bass/Vocal).
- Long Press: Disconnect Bluetooth.
- Mode Button:
- Short Press: Change play mode (Bluetooth/TF Card/AUX/USB).
Note: To turn RGB lights on/off, press the Volume Up (+) and Volume Down (-) buttons simultaneously.
5.2. Sound Modes (EQ Setting)
The Ohayo X3 offers three distinct sound modes to enhance your listening experience:
- Extra Bass Mode: Ideal for enhancing music, parties, gaming, and movie moments.
- Standard Mode (Balance): Provides a balanced audio profile suitable for general listening.
- Vocal Mode: Makes calls, podcasts, online meetings, and audiobooks clearer and more engaging.
Short press the EQ button to cycle through these modes.



5.3. Hands-Free Calling
With the built-in microphone, you can answer calls directly through the speaker when connected via Bluetooth.
- Answer/End Call: Short press the Play/Pause button.
- Reject Call: Long press the Play/Pause button.

5.4. Other Connectivity Options
The Ohayo X3 supports playback from various sources:
- TF Card Playback: Insert a TF (MicroSD) card with music files into the TF card slot. The speaker will automatically switch to TF card mode and begin playback.
- AUX Input: Connect your device to the speaker using the provided 3.5mm audio cable. The speaker will automatically switch to AUX mode.
- USB Drive Playback: Insert a USB drive with music files into the USB port. The speaker will automatically switch to USB mode and begin playback.
Short press the Mode button to cycle through Bluetooth, TF Card, AUX, and USB modes.

5.5. RGB Colorful Lights
The speaker features dual circular breathing lights that change colors in sync with the music. To toggle the lighting effects on or off, press the Volume Up (+) and Volume Down (-) buttons simultaneously.

6. Maintenance
- Cleaning: Use a soft, damp cloth to clean the speaker's surface. Do not use abrasive cleaners or solvents.
- Waterproof Seal: Always ensure the protective rubber flap covering the charging and input ports is securely closed when the speaker is exposed to water to maintain its IPX7 waterproof rating.
- Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the speaker frequently. Charge it regularly, even if not in use for extended periods.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Low battery. | Charge the speaker using the provided Type-C cable. |
| Cannot pair with Bluetooth device. | Speaker not in pairing mode; device Bluetooth off; too far apart; already connected to another device. | Ensure speaker is powered on and flashing blue. Turn on Bluetooth on your device. Move device closer to speaker. Disconnect from other devices or long press EQ button to disconnect. |
| No sound or low volume. | Volume too low on speaker or device; incorrect input mode; faulty cable. | Increase volume on both speaker and connected device. Short press Mode button to select correct input (BT/TF/AUX/USB). Check 3.5mm audio cable if using AUX. |
| TWS pairing fails. | Speakers already connected to other devices; incorrect pairing procedure. | Ensure both speakers are disconnected from other devices. Follow TWS pairing steps carefully (double-click Play/Pause on one speaker). |
| Sound distortion. | Volume too high; poor audio source quality. | Reduce volume on both speaker and device. Try a different audio source or EQ mode. |
8. User Tips
- The Ohayo X3 speaker is highly versatile and can be used for various activities, including camping, hiking, and family gatherings.
- Its IPX7 waterproof rating makes it perfect for use by the pool, at the beach, or even in the shower.
- The speaker's multiple input options (Bluetooth, TF Card, AUX, USB) allow you to play music from almost any source.
- The USB-C charging port ensures compatibility with modern charging standards.
- The speaker connects seamlessly with iPhones and other Bluetooth-enabled smartphones.
- Consider using the AUX input for connecting to laptops or desktop computers for enhanced audio during movies or presentations.

9. Safety Information
WARNING:
- Do not disassemble, repair, or modify the product. This may cause fire, electric shock, or complete damage to the product.
- Do not expose the product to extreme temperatures (hot or cold), direct sunlight, or humid environments.
- Keep the product away from water and liquids unless the port cover is securely sealed.
- Do not use the product during a thunderstorm to avoid electric shock.
- Keep out of reach of children.
- Dispose of the battery and product according to local regulations. Do not dispose of with household waste.
10. Warranty and Support
For detailed warranty information, technical support, or further inquiries, please refer to the official user manual PDF or contact Ohayo customer support.
Official User Manual (PDF): Click here to view/download
You can also visit the Ohayo website or contact their support team via email at support@ohayo.com.cn.





