Introduction
The UGREEN ES702 is a versatile 2-in-1 device designed to provide emergency jump-starting for vehicles and portable power for electronic devices. Featuring a 12000mAh battery capacity and 1000A peak current, it is capable of jump-starting a wide range of gasoline and diesel vehicles. This manual provides essential information for the safe and effective use of your device.
Image: UGREEN ES702 Car Jump Starter with smart ignition clamps and storage bag.
Safety Information
Please read all safety warnings and instructions before using this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
- Keep out of reach of children.
- Do not expose the device to rain or wet conditions.
- Do not disassemble or modify the device.
- Use only the provided smart ignition clamps.
- Ensure correct polarity when connecting to a car battery.
- Do not jump start a frozen battery.
- Do not operate in explosive atmospheres.
- Store in a cool, dry place.
Image: Built-in safety protections including low battery, reverse connection, overcurrent, and high temperature protection.
Package Contents
- UGREEN ES702 Car Jump Starter
- Smart Ignition Clamps
- USB Charging Cable
- Storage Bag
- User Manual (this document)
Image: UGREEN ES702 Car Jump Starter, smart clamps, USB cable, and storage bag.
Setup and Charging
Charging the Jump Starter
Before initial use, fully charge the UGREEN ES702. The device features a digital display to show the battery level, ensuring you always know its charge status.
- Connect the provided USB charging cable to the input port (5V2.4A) on the jump starter.
- Connect the other end of the USB cable to a suitable USB power adapter (not included).
- The digital display will indicate the charging progress.
- A full charge is recommended for optimal performance, especially before jump-starting a vehicle.
Image: Digital display indicating battery charge level.
Operating Instructions
Jump Starting a Vehicle
The UGREEN ES702 is designed to jump start 12V gasoline vehicles up to 6.0L and diesel vehicles up to 3.5L. Ensure the jump starter's power is above 60% before attempting to jump start.
- Connect: Connect the smart ignition wire to the jump starter's output port. Turn on the jump starter.
- Clamping: Open the car hood. Connect the red clamp to the positive (+) terminal of the car battery and the black clamp to the negative (-) terminal. The smart clamps feature anti-reverse connection design to prevent misoperation.
- Ignition: If the green light on the smart clamps is solid, you can start the car. After the car starts, immediately remove the ignition clip from the car battery, then disconnect it from the jump starter.
Image: Step-by-step guide for jump starting a vehicle.
Image: UGREEN ES702 jump starting a high-displacement car.
Using as a Power Bank
The UGREEN ES702 can also function as a portable power bank to charge your electronic devices.
- Connect your device's charging cable to the USB-A or USB-C output port on the jump starter.
- The device will automatically begin charging.
- The total output is 24W Max, suitable for smartphones, tablets, and other USB-powered gadgets.
Image: UGREEN ES702 used as a power bank to charge mobile devices.
Emergency LED Light
The device is equipped with an emergency LED light for various situations.
- Normal Lighting: Press and hold the power button for three seconds to activate.
- Alert Mode: Press the power button once after activating normal lighting.
- SOS Mode: Press the power button twice after activating normal lighting.
Image: Instructions for activating different emergency light modes.
Image: Emergency LED light in use.
Maintenance
- Keep the device charged above 60% to prolong battery life and ensure readiness for emergency use.
- Store the jump starter and its accessories in the provided storage bag in a cool, dry place, away from direct sunlight and extreme temperatures.
- Clean the device with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
- Regularly inspect the smart ignition clamps and cables for any signs of damage or wear. Replace if necessary.
Troubleshooting
- Device not turning on: Ensure the device is charged. If the battery is completely depleted, it may take a few minutes of charging before it responds.
- Car not starting:
- Check that the jump starter's battery level is above 60%.
- Verify that the smart ignition clamps are securely connected to the correct battery terminals (red to positive, black to negative).
- Ensure the green light on the smart clamps is solid before attempting to start the car.
- The device has built-in protections against reverse connection and other misoperations. If an error light appears on the clamps, refer to the clamp's indicator guide (if available) or re-check connections.
- If the car battery is severely damaged or completely dead, the jump starter may not be able to start it.
- Device not charging external devices: Ensure the jump starter has sufficient charge. Try a different USB cable or device to rule out cable/device issues.
Frequently Asked Questions (FAQ)
- Q: Is this device also an air pump to inflate tires?
- A: No, the UGREEN ES702 is not an air pump. It functions as a car jump starter and a portable power bank.
Specifications
| Parameter | Value |
|---|---|
| Name | UGREEN Car Jump Starter |
| Model No. | ES702 |
| Battery Capacity | 12000mAh |
| Input | 5V2.4A |
| Output | 5V2.4A |
| Total Output | 24W Max |
| Starting Current | 600A |
| Peak Current | 1000A |
| Net Weight | 470g |
| Dimensions (H x W x T) | 161.5mm x 85mm x 33mm |
| Applicable Vehicle Types | 12V Gasoline cars up to 6.0L, 12V Diesel cars up to 3.5L |
| Certifications | UL, RoHS, CE |
| Material | Flame-retardant materials (glow-wire test up to 750°C) |
Image: Detailed product parameters table.
Image: Physical dimensions of the UGREEN ES702.
Image: High current capability and internal battery structure.
Warranty and Support
UGREEN provides a 1-year warranty for this product. For any questions or support needs, please contact UGREEN online customer service. Our team is available 24 hours a day to assist you.
Image: Summary of warranty and customer service details.
User Tips
- Always ensure the jump starter is charged above 60% before attempting to jump start a vehicle for optimal performance and safety.
- Double-check the polarity when connecting the clamps to the car battery to avoid issues, although the device has built-in protection.
- Keep the device in its storage bag when not in use to protect it from dust and damage.
- Remember that this device is a jump starter and power bank; it does not function as an air compressor for tires.