GODIAG GT110

Contents

GODIAG GT110 CAN-Bus UDS IMMO System Test Platform Cable

User Manual

1. Introduction and Overview

The GODIAG GT110 CAN-Bus UDS 4th Generation IMMO System Test Platform Cable is a specialized tool designed for Volkswagen (VW), Audi, Skoda, and Seat vehicles. It facilitates offline POGO PIN data reading and writing, primarily for dashboard key programming, including boot probe functions, across all UDS systems for these brands.

This device provides real-time display of working voltage and current, features an independent power switch, and simulates an ignition switch. A built-in buzzer provides audible prompts for ignition start and shutdown. It supports CANH UDS communication indication, CR2032 remote key battery detection, and enables key and IMMO instrument synchronization tests. The GT110 also assists with intelligent IMMO system emergency start area induction detection, offline diagnosis of IMMO combination instruments, IMMO data reading and writing, mileage repair, and key matching functions.

The GODIAG GT110 is compatible with various diagnostic and programming tools such as HEX V2, V-A-G-C-O-M V-C-D-S 5053, V-A-S5054A, VAS6154, SUPER VAG K+CAN, Obdstar, Lonsdor, AVDI, ZEDFULL, VVDI2, Key Tool Plus, X300 DP Plus, and AUTEL devices.

GODIAG GT110 device with cables and POGO PIN

Figure 1: GODIAG GT110 CAN-Bus UDS IMMO System Test Platform Cable

2. Product Features

  • POGO PIN functionality for reading and writing data to the dashboard.
  • Offline connection capability to convert the dashboard to standard OBD2.
  • Ability to perform key chip and instrument synchronization tests.
  • Independent power switch for enhanced control.
  • Simulated ignition switch for testing purposes.
  • Real-time display of current working voltage.
  • CR2032 remote key battery detection.
  • Display of current instrument working current.
  • CANH UDS communication indicator light.
  • Key induction adapter with integrated light.
  • POGO PIN design ensures stable connection and prevents cable damage.

3. Setup and Connection

3.1 POGO PIN Usage Steps

  1. Connect the power supply to the GT110. Note: Ensure the power switch is OFF before connecting.
  2. Press the IGN ignition power button. The IGN ignition switch must be turned ON.
  3. Connect the instrument plug to the GT110.
  4. Identify the correct POGO PIN connection point on the corresponding instrument (dashboard) and connect it with the provided probe.
  5. Turn on the main power switch for approximately 3-5 seconds. When the instrument's ABS light begins flashing, it indicates that the POGO PIN read and write mode has been successfully entered.
POGO PIN positioning on a VDO NEC dashboard

Figure 2: POGO PIN Positioning - VDO NEC Dashboard (showing four motors and one speaker)

POGO PIN positioning on a Typ 8 Skoda Fabia dashboard

Figure 3: POGO PIN Positioning - Typ 8 Skoda Fabia Dashboard (showing two motors and one speaker)

4. Operating Instructions

4.1 Intelligent IMMO System Emergency Start Area Induction Detection

To detect the vehicle's key emergency start sensing area, press the vehicle's start switch. Then, bring the GT110's key identifier close to various areas of the vehicle. If the key identifier light flashes or illuminates, that specific area is the vehicle's key emergency start sensing area. This feature is useful if a smart key runs out of power; placing the dead smart key in this detected area can allow the vehicle to start.

5. Specifications

Attribute Value
Brand Name GODIAG
Origin Mainland China
Certification CE
Package Length 16 cm
Package Width 12 cm
Package Height 5 cm
Package Weight 0.179 kg

6. Troubleshooting

6.1 Car IMMO Start and Key Chip Detection Test Result Analysis

  • Key identifier light flashes and then goes out: This indicates that the IMMO chip and the chip key are functioning correctly.
  • Key identifier light flashes for a long time: This suggests that the chip key and the vehicle's IMMO system do not match. The chip key will need to be re-matched or reprogrammed.
  • Key identifier light does not flash: This indicates a fault within the vehicle's IMMO system. Further diagnosis of the vehicle's IMMO system is required.

7. Package Contents

  • 1 x GODIAG GT110 CAN-Bus UDS 4th Generation IMMO System Test Platform Cable with POGO PIN

8. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your authorized GODIAG dealer or the manufacturer's customer service. Please retain your purchase receipt for warranty validation.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.