1. Introduction
The HOBBYWING QuicRun Fusion 8IGHT is an innovative 2-in-1 integrated power system, combining an 80A Electronic Speed Controller (ESC) and a 2300KV brushless sensored motor into a single compact unit. Specifically designed for 1/8 scale RC cars and rock crawlers, this system offers exceptional performance, reliability, and ease of installation. Its Field-Oriented Control (FOC) technology ensures ultra-smooth control, high torque, and nearly silent operation, making it ideal for demanding off-road applications.
Figure 1: The HOBBYWING QuicRun Fusion 8IGHT integrated motor and ESC unit.
2. Safety Precautions
- Always disconnect the battery from the ESC when not in use to prevent accidental operation and potential damage.
- Ensure all wiring connections are secure and properly insulated to avoid short circuits.
- Operate your RC vehicle in a safe environment, away from people, pets, and obstacles.
- High-power systems can generate significant heat. Allow the motor and ESC to cool down after use before handling.
- Use only compatible batteries (2-4S LiPo or 6-12 Cells NiMH) and ensure correct polarity.
- Keep the product away from children.
3. Product Overview
The QuicRun Fusion 8IGHT is engineered for superior performance and durability:
- Integrated Design: Combines motor and ESC for a clean, space-saving installation.
- IP67 Waterproof & Dustproof: Ensures reliable operation in various weather and track conditions, including sand, ice, snow, and water. (Note: IP67 protection provides splash-proof, water-resistant, and dust-proof capabilities under normal use. It is not permanently effective; performance may diminish over time due to wear and aging. Avoid prolonged immersion in water, as it may result in product damage.)
- FOC (Field-Oriented Control) Technology: Delivers ultra-smooth throttle linearity, high torque, and nearly silent operation.
- Super Internal BEC: Features a built-in high-performance BEC with adjustable output voltages (6V/7.4V/8.4V) and a maximum continuous output current of 6A (switch mode), capable of powering standard and high-voltage servos, light sets, and winches.
- Smart Torque: The ESC intelligently adjusts torque output to match driving conditions, automatically increasing torque to overcome resistance and accelerate uphill. It also reduces torque to stabilize vehicle speed when descending, ensuring precise speed control.
- Multiple Operating Modes: Supports Fixed Speed Mode (direct forward and reverse), Normal Mode (forward and reverse with brake), and Normal Mode (without fixed speed functionality).
Figure 2: The QuicRun Fusion 8IGHT integrated power system in an RC crawler chassis.
Figure 3: The Fusion 8IGHT system is rated IP67 for all-weather and track conditions.
Figure 4: The system supports three distinct operating modes.
4. Specifications
Figure 5: Detailed specifications of the QuicRun Fusion 8IGHT.
| Feature | Detail |
|---|---|
| Product Name | QuicRun Fusion 8IGHT |
| Product Number | 30120406 |
| Type | 1/8th Scale, Brushless, Sensored, Waterproof |
| Cont./Peak Current | 80A/260A |
| Input Voltage | 2-4S LiPo / 6-12 Cells NiMH |
| BEC Output | 6V/7.4V/8.4V Adjustable, 6A Continuous (Switch Mode) |
| KV | 2300KV |
| Motor Poles | 4 |
| Input Wires | Black-15AWG-250mm*1, Red-15AWG-250mm*1 |
| Input Connectors | XT60 |
| ESC Programming via | LED Program Box (Supported), LCD G2 Program Box/Pro (Supported), Independent programming port (switch position) |
| Firmware Upgrade | Not Supported |
| Motor Dimensions (D/L) | 42mm/69mm |
| Shaft Dimensions (D/L) | 5mm/18.5mm |
| Weight | 338g (including wires & connectors) |
| Applications | 1/8th Rock Crawler |
5. Setup
5.1 Installation
The integrated design of the Fusion 8IGHT (42mm diameter, 69mm length) simplifies installation. Mount the unit securely in your 1/8 scale RC car or rock crawler chassis, ensuring adequate clearance for wires and proper ventilation if applicable.
Figure 6: Integrated design of the Fusion 8IGHT with dimensions (42x69mm).
5.2 Wiring Connections
- Battery Connection: Connect your 2-4S LiPo or 6-12 Cells NiMH battery to the XT60 input connector (Red-15AWG, Black-15AWG wires). Ensure correct polarity.
- Receiver Connection: Connect the signal wire from the Fusion 8IGHT to the throttle channel of your RC receiver.
- Drag Brake Adjustment (Optional): For real-time drag brake adjustments, connect the yellow signal wire from the Fusion 8IGHT to an available channel on your receiver. This allows you to tune the drag brake force directly from your radio.
Figure 7: Example installation and wiring of the Fusion 8IGHT in an RC car.
Figure 8: The yellow signal wire enables real-time drag brake adjustment.
6. Operating Modes
The Fusion 8IGHT supports three distinct operating modes to suit various driving preferences:
- Fixed Speed Mode: Provides direct forward and reverse control, maintaining a consistent speed.
- Normal Mode (with brake): Offers forward and reverse functionality with a braking action.
- Normal Mode (without fixed speed functionality): This mode operates similarly to a traditional brushed motor, where the ESC does not provide a fixed speed function.
Figure 9: Smart Torque management ensures smooth driving during ascents and descents.
7. Parameter Adjustment
The Fusion 8IGHT offers a wide range of customizable parameters, with a total of 13 adjustable settings for fine-tuning performance. These can be adjusted using compatible LED or LCD Program Boxes.
Adjustable Parameters include:
- RPM Decrease Rate
- Punch
- Neutral Range
- Running Mode
- Lipo Cells
- Cutoff Voltage
- Thermal Protection
- Motor Rotation
- BEC Voltage (6V/7.4V/8.4V)
- Drag Brake Force
- And more...
Figure 10: The Fusion 8IGHT offers 13 adjustable settings for fine-tuning.
Figure 11: The ESC is compatible with both basic LED and advanced LCD programming boxes.
8. Maintenance
- After operating in wet or dusty conditions, clean the unit thoroughly. Rinse with fresh water if exposed to saltwater or mud, then dry completely before storage or next use.
- Regularly check all wiring and connectors for signs of wear, damage, or loose connections.
- Keep the motor free from debris and obstructions to ensure proper cooling.
- Store the unit in a dry, cool place away from direct sunlight and extreme temperatures.
9. Troubleshooting
- No Power: Check battery connections, ensure the battery is charged, and verify all wires are securely connected.
- Erratic Behavior/Loss of Control: Inspect receiver connections, check for radio interference, and ensure your transmitter batteries are fresh.
- Overheating: Ensure proper ventilation around the motor and ESC. Check for excessive gearing or binding in the drivetrain that could cause overload.
- Motor Not Spinning Smoothly: Verify all sensor wire connections are secure. Check for any physical obstructions to the motor shaft.
10. User Tips
- This unit is known to be a direct fit for many 1/8 scale rock crawlers, including models like the Ryft, Emo X2, and Emo X3.
- Users have reported excellent low-end torque and smooth operation, even with stock 17-tooth or 18-tooth pinion gears.
- The product is an official HOBBYWING item, ensuring quality and compatibility.
11. Warranty and Support
For warranty claims, technical support, or service inquiries, please contact your authorized HOBBYWING dealer or the official HOBBYWING customer service. Keep your proof of purchase for warranty validation.