1. Introduction
Thank you for choosing our product! The BF-T18 is a portable transceiver designed for free use in almost all European countries. This multi-task PMR446 transceiver combines the latest radio communication technology with a sturdy mechanical frame, making it an ideal and effective solution for professionals needing to stay in touch (e.g., on construction sites, in buildings, at trade fairs, or in hotels) or for leisure users who want to connect with friends and family.
RF Energy Exposure and Product Safety Guide
ATTENTION: Before using this product, please read the RF Energy Exposure and Product Safety Guide that ships with the radio. This guide contains instructions for safe usage and RF energy awareness and control to ensure compliance with applicable standards and regulations.
Programming Software (Optional)
The programming software CPS-T11-EU allows you to enhance your radio's performance or reduce its functionality by disabling certain default features (e.g., CTCSS, TOT). For more information, consult the Programming software manual. Any attempt to change frequencies or output power of the radio without proper authorization invalidates the approval.
2. Package Contents
The standard package includes the following items:
- 1 Transceiver
- 1 1500mAh Li-ion rechargeable battery pack
- 1 User manual
- 1 Belt clip
- 1 USB cable
- 1 Wrist-strap
Note: The exact number of items may vary depending on the specific package purchased.

3. Product Overview
The Baofeng BF-T18 PMR446 Transceiver is designed for ease of use and durability. It features a compact design with essential functions for reliable communication.

Main Controls and Parts:
- Antenna: For transmitting and receiving radio signals.
- Flashlight: Provides illumination in low-light conditions.
- Power/Volume Knob: Turn clockwise to power on and increase volume; turn counter-clockwise to decrease volume and power off.
- LED Indicator: Red indicates transmission (TX), Green indicates reception (RX).
- PTT Key (Push-to-Talk): Press and hold to transmit, release to receive.
- DOWN Key: Short press to select the desired channel downwards. Long press to lock or unlock function keys.
- Built-in Microphone: For voice input during transmission.
- LED Digital Display: Shows channel number and other status indicators.
- External Speaker/Microphone Jack: Allows connection of external accessories like headsets or microphones.
- UP Key: Short press to select the desired channel upwards. Long press to enter monitoring state.
- LAMP/FM Key: Short press to turn the flashlight on or off.
- Speaker: For audio output.
- Battery Release Latch: Secures the battery pack.
- Belt Clip: For attaching the radio to clothing or a belt.
- Micro-USB Charging Port: DC5V USB input for charging.
- Charging Indicator: Red light indicates charging, green light indicates fully charged.
4. Setup
Battery Installation and Charging
The radio uses a 3.7V Li-ion rechargeable battery pack. To install, align the battery with the back of the radio and secure it with the battery release latch.
To charge the battery:
- Connect the AC/DC wall adapter to a mains power socket.
- Insert the jack of the wall adapter into the desktop charger plug.
- Place the radio in the desktop charger, ensuring the Micro-USB Charging Port (15) is correctly aligned.
- The Charging Indicator (16) will show a red light during charging. It will turn green when fully charged.
A full recharge typically takes 4-5 hours. For maximum battery life, it is recommended to charge the battery pack when the radio is off and fully discharged.
WARNING: Using a different battery charger other than the one specified can cause damage to your device or may even cause explosions and personal injuries.

5. Operation
Turning Your Radio On and Off
- To turn your radio ON, turn the Power/Volume knob (3) clockwise.
- To turn your radio OFF, turn the Power/Volume knob (3) counter-clockwise.
Setting the Volume
- Increase volume by turning the Power/Volume knob (3) clockwise.
- Decrease volume by turning the Power/Volume knob (3) counter-clockwise.
CAUTION: Do not hold the radio close to your ear if the volume is set to an uncomfortable level, as it could cause hearing damage.
Talking and Listening
All radios in your group must be set to the same channel and Sub-Code to communicate.
- Hold your radio 2-3 cm from your mouth.
- Press and hold the PTT button (5) while speaking. The Transmit (TX) icon will appear on the display.
- Release the PTT button (5) to receive incoming calls. The Receive (RX) icon will appear on the display.
For maximum clarity, hold the radio 2 to 3 cm away and avoid covering the microphone (7) while talking.
Channel Selection
In standby mode, short press the UP key (10) or DOWN key (6) to select the desired channel. The corresponding channel is displayed digitally. When the voice prompt function is enabled, the channel number will be broadcast by voice.
To quickly switch channels, press and hold the UP key (10) or DOWN key (6).
Monitor Function
Press and hold the UP key (10) for 2 seconds to enter Monitor mode. This allows you to listen for weak signals on the current channel and adjust the volume level even when not receiving a signal.
Scan Function
This function can only be activated via programming software. To enable scanning, all 16 channels must be programmed. With the radio turned on, press and hold the UP (10) and DOWN (6) keys simultaneously to start scanning automatically. When a signal is detected, the scan will stop on the busy channel. If you press and hold PTT (5), you will transmit on the last busy channel. Press any function key to exit the scanning state.
Flashlight
With the radio turned on, short press the LAMP/FM key (11) to turn the flashlight on or off.
English/Chinese Language Switch
Press and hold the PTT (5) + DOWN key (6) to turn on the radio and switch the prompt language between English and Chinese.
FM Radio
The frequency range for listening to the FM radio is 88-108MHz. Press and hold the LAMP/FM key (11) to turn on the radio, then use the UP key (10) to search for radio stations automatically. Press the PTT key (5) or turn off the radio to exit FM radio mode.
Squelch
The Squelch function suppresses noise on free channels and allows reception of even weak signals. It has 10 different Squelch levels configurable via programming software:
- Level 0: Squelch is turned off.
- Levels 1-9: Different levels of noise reduction. Higher levels provide more noise reduction but may block weaker signals.
By default, the Squelch level is set to 4. Ensure you do not set an excessively high Squelch level, as this may prevent you from receiving weaker signals. Conversely, an excessively low Squelch value might activate the Squelch even when no signals are present. Always adjust Squelch when no signals are present.
TOT (Time Out Timer)
The Time Out Timer (TOT) is settable from 30 seconds to 270 seconds only through the programming software. This feature is disabled by default.
CTCSS/DCS Tones (Sub-codes)
CTCSS and DCS tones act as access codes, allowing the radio to communicate only with users on the same channel and with the same code. For each channel, you can set up to 50 CTCSS tones and 210 DCS codes. This ensures that undesired signals from other stations on the same frequency but with different tones are not received.
VOX (Voice Operated Exchange)
The VOX feature enables hands-free conversations without needing to press the PTT button. Simply speak into the microphone, and communication will activate automatically. VOX sensitivity can be adjusted in 5 levels (1-5) via programming software. Level 2 is the default with the lowest VOX sensitivity, and level 5 is the lowest. You can enable/disable VOX and select sensitivity levels through the programming software (path: Edit > VOX > Vox Gain).
6. Maintenance
To ensure the longevity and optimal performance of your radio, please follow these suggestions:
- Do not attempt to open the unit. Non-expert handling may damage it and/or void the warranty.
- When using a regulated power supply, ensure the voltage is 5V to avoid damage.
- Avoid storing the radio in dusty or dirty areas, as high temperatures can shorten the life of electronic devices and warp or melt plastics.
- Keep the radio dry. Rainwater or dampness will corrode electronic circuits.
- If the radio emits a peculiar smell or smoke, immediately shut off its power and remove the charger or battery.
- Do not transmit without an antenna.
7. Troubleshooting
If you encounter issues with your BF-T18 walkie talkie, consider the following common solutions:
- No Power: Ensure the battery is fully charged and correctly installed. Turn the Power/Volume knob clockwise to power on.
- Cannot Transmit or Receive: Verify that all radios in your group are on the same channel and sub-code (CTCSS/DCS). Check that the antenna is securely attached.
- Poor Audio Quality: Ensure the microphone is not covered during transmission. Adjust the volume level. Check for obstructions between radios if range is affected.
- Radio Not Charging: Confirm the charger cable and adapter are properly connected. Check the charging indicator light.
- Interference/Noise: Adjust the Squelch level. If using in an area with many other radio users, consider changing channels or sub-codes.
If the problem persists, consult the full user manual (PDF) or contact customer support.
8. Technical Specifications
General Part
| Feature | Specification |
|---|---|
| Frequency Range | 446.00625-446.09375 MHz (PMR446) |
| Working Temperature | -10°C to +40°C |
| Operation Voltage | DC 3.7 V ±10% |
| Operation Mode | Simplex |
| Dimensions | 150mm×54mm×27mm (with Antenna) |
| Weight | 133g (Battery pack included) |
| Antenna Impedance | 50ohm |
| Duty Cycle | 5/5/90% |
| Category | B |
Transmitter Part
| Feature | Specification |
|---|---|
| Frequency Stability | ±2.5ppm |
| RF Output Power | ≤500mW ERP |
| Max Frequency Deviation | ≤2.5KHz |
| Audio Distortion | ≤3% |
| Adjacent Channel Power | ≥60dB |
| Spurious Radiation | Within European legal terms |
| Occupied Bandwidth | Within European legal terms |
Receiver Part
| Feature | Specification |
|---|---|
| Receive Sensitivity | ≤0.2µV @20dB SINAD |
| Audio Distortion | ≤3% |
| Audio Response | 300 Hz ~ 3 KHz |
| Adjacent Channel Selectivity | Within European legal terms |
| Inter Modulation Rejection | Within European legal terms |
| Spurious Response | Within European legal terms |
| Blocking | Within European legal terms |
All specifications may be modified without prior notice or liability.
PMR446 Frequency Chart
| Channel | Frequency (MHz) |
|---|---|
| 1 | 446.00625 |
| 2 | 446.01875 |
| 3 | 446.03125 |
| 4 | 446.04375 |
| 5 | 446.05625 |
| 6 | 446.06875 |
| 7 | 446.08125 |
| 8 | 446.09375 |
| 9 | 446.10625 |
| 10 | 446.11875 |
| 11 | 446.13125 |
| 12 | 446.14375 |
| 13 | 446.15625 |
| 14 | 446.16875 |
| 15 | 446.18125 |
| 16 | 446.19375 |
9. User Tips
While no specific user reviews or Q&A were provided, here are some general tips for optimizing your walkie talkie experience:
- Maximize Range: For the best range, use the radio in open areas with minimal obstructions. In urban environments or areas with dense foliage, range may be reduced.
- Battery Life: To extend battery life, utilize the battery save feature (if enabled via programming software) and ensure the battery is fully discharged before recharging.
- Clear Communication: Always hold the radio 2-3 cm from your mouth and avoid covering the microphone when speaking.
- Channel Etiquette: Always check if a channel is clear before transmitting to avoid interrupting ongoing conversations.
10. Warranty and Support
This radio is designed for durability and long-term use. For warranty information and customer support, please refer to the documentation provided with your purchase or contact the seller directly. Keep your proof of purchase for any warranty claims.
11. Regulatory Information
Disclaimer
While every effort has been made to ensure the accuracy and completeness of this manual, we do not bear responsibility for any possible errors or omissions. Due to continuous technological development, we reserve the right to change the design and specifications of the product without prior notice. No part of this handbook may be copied, modified, translated, or disseminated in any form without our prior written authorization.
Certifications
The Baofeng BF-T18 Walkie Talkie holds the following certifications: CE, Dot, EAC, EPA, FCC, GMP, RoHS, TGA, UL, KC, pse, WEEE.
This product is a PMR446 Transceiver, which means it is license-free for use in European countries.
