JIKONG JK-BD6A17S8P/ JK-BD6A20S8P/ JK-BD6A24S8P

Contents

JIKONG Smart BMS User Manual

Models: JK-BD6A17S8P, JK-BD6A20S8P, JK-BD6A24S8P

1. Introduction

The JIKONG Smart Battery Management System (BMS) is designed for 8S-24S Li-Ion, LiFePo4, and LTO battery packs, offering active balancing and comprehensive protection features. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your JIKONG Smart BMS.

What is Active Balancing?

Active balancing, also known as non-lossy balancing, is a technology that transfers energy from cells with higher energy levels to those with lower energy levels. This process ensures voltage balance across all cells with minimal energy loss. Unlike passive balancing, active balancing operates continuously during charging, discharging, or idle states until the voltage difference between cells is within a predefined range. This method is particularly suitable for larger capacity battery packs due to its higher balancing currents (typically 1-2A) and efficient energy transfer without significant heat generation.

2. Product Overview

Key Features

  • Intelligent Active Balance: Efficiently balances cell voltage differences, prolonging battery life and ensuring stable performance.
  • Wide Compatibility: Supports 8S to 24S Li-ion, LiFePo4, and LTO battery types.
  • High Current Capacity: Continuous current of 40A-80A, with instantaneous current capabilities of 200A-450A.
  • Comprehensive Protection: Includes Overcharge Protection, Over Discharge Protection, Overcurrent Protection, and Short Circuit Protection.
  • Multi-interface Display: Monitor battery status via APP (iOS, Android, HarmonyOS), PC software, or an external dedicated display screen.
  • Rich Communication Interfaces: Features GPS, RS485, CAN, Display, Heating, and NTC ports for versatile integration.
  • Durable Construction: Full aluminum alloy shell provides excellent heat dissipation and robust protection against environmental damage.
  • High-performance MCU: Equipped with a main control chip for efficient operation and precise management.
JIKONG Intelligent Active Balance Power Management System (BMS) with battery pack, phone app, and key features.
Figure 2.1: JIKONG Intelligent Active Balance Power Management System (BMS) with battery pack, phone app, and key features.

Component Breakdown

Exploded view of the BMS showing cooling aluminum alloy, MOS, Jikong MCU, and sampling lines.
Figure 2.2: Exploded view of the BMS showing cooling aluminum alloy, MOS, Jikong MCU, and sampling lines.

The BMS is constructed with high-quality components, including:

  • Cooling Aluminum Alloy: Provides superior heat dissipation, crucial for high-current applications.
  • MOS (Metal-Oxide-Semiconductor): Power switching components.
  • Jikong MCU (Microcontroller Unit): The central processing unit for intelligent management.
  • NTC (Negative Temperature Coefficient) Thermistor: For temperature detection and protection.
  • Sampling Lines (A & B): For precise voltage acquisition from individual cells.

Package Contents

Contents of the JIKONG Smart BMS package.
Figure 2.3: Contents of the JIKONG Smart BMS package.

The standard package includes:

  • BMS x 1
  • Switch key x 1 (long 50cm)
  • NTC x 1 (long 40cm)
  • Sampling line B x 1 (long 70cm)
  • Sampling line A x 1 (long 70cm)

3. Setup and Installation

WARNING: Incorrect wiring can cause damage to the BMS, battery, or connected equipment. Ensure all connections are correct before applying power.

General Installation Steps

Three-step installation and wiring guide for the JIKONG Smart BMS.
Figure 3.1: Three-step installation and wiring guide for the JIKONG Smart BMS.
  1. Connecting all the cables: Carefully connect all individual cell voltage sampling wires to the battery pack, ensuring correct polarity and sequence.
  2. Insert the cable into the BMS: Once all sampling wires are connected to the battery, insert the main sampling cable connector into the designated port on the BMS.
  3. Connect the B-line and the P-line to the battery: Connect the main negative battery terminal (B-) to the B- terminal on the BMS. Connect the main negative load/charge terminal (P-) to the P- terminal on the BMS.

Wiring Diagrams

Refer to the following diagrams for specific cell configurations. Always ensure that the cell count and wiring sequence match your battery pack.

Wiring diagram for a 24-string battery cell configuration with the JIKONG Smart BMS.
Figure 3.2: Wiring diagram for a 24-string battery cell configuration. This diagram illustrates the connections for P+, P-, B-, NTC, and the inverter/charger.
Wiring diagram for a 16-string battery cell configuration with the JIKONG Smart BMS.
Figure 3.3: Wiring diagram for a 16-string battery cell configuration. This diagram illustrates the connections for P+, P-, B-, NTC, and the inverter/charger.

4. Operating Instructions

Monitoring and Data Connection

The JIKONG Smart BMS offers multiple ways to monitor your battery system's data:

  • Mobile APP: Download the 'JIKONG SMART BMS' app (available for iOS, Android, and HarmonyOS). The app supports multiple languages and automatically switches with your mobile phone system. It displays real-time data such as Voltage, Current, Temperature, State of Charge (SOC), Alarms, and Cycles.
  • PC Software: Connect the BMS to a computer to access detailed monitoring and configuration options.
  • Dedicated Home Storage Display: An optional external display can show key information like voltage, current, temperature, and number of strings at a glance.
Multi-screen display options for monitoring BMS data via mobile app, PC software, or dedicated display.
Figure 4.1: Multi-screen display options for monitoring BMS data.
Dedicated JIKONG home storage display showing real-time battery information.
Figure 4.2: Dedicated JIKONG home storage display showing real-time battery information.

Intelligent Interaction and Parameter Adjustment

The BMS allows for free adjustment of multiple protection values, including overcharge, overdischarge, overcurrent, temperature, and balance parameters. These adjustments can be made through the mobile app or the PC software interface.

PC software interface for intelligent interaction and easy adjustment of BMS parameters.
Figure 4.3: PC software interface for intelligent interaction and easy adjustment of BMS parameters.

Inverter Communication Protocol Setup

The JIKONG Smart BMS is compatible with mainstream inverter communication protocols in the market. These protocols can be set up easily through the mobile app or the host computer software.

BMS compatibility with various inverter communication protocols and mobile app setup.
Figure 4.4: BMS compatibility with various inverter communication protocols and mobile app setup.
PC software interface for setting inverter communication protocols.
Figure 4.5: PC software interface for setting inverter communication protocols. Supported protocols include JIKONG, Growatt, NIU, Voltronic, China tower, and WOW.

5. Maintenance

The JIKONG Smart BMS is designed for durability and long-term performance. Regular maintenance is minimal but important for optimal operation.

  • Visual Inspection: Periodically inspect the BMS and all connections for any signs of damage, corrosion, or loose wiring.
  • Firmware Updates: Check for available firmware updates through the mobile app or PC software to ensure your BMS has the latest features and performance enhancements.
  • Environmental Conditions: Ensure the BMS operates within its specified temperature and humidity ranges. The aluminum alloy shell provides excellent heat dissipation, but proper ventilation is still recommended.
  • Cleaning: Keep the BMS free from dust and debris. Use a soft, dry cloth for cleaning. Do not use liquids or abrasive cleaners.

6. Troubleshooting

This section addresses common issues you might encounter with your JIKONG Smart BMS.

  • BMS Not Powering On:
    - Check all main power connections (B- and P-) to ensure they are secure and correctly wired.
    - Verify that the battery pack voltage is within the operational range of the BMS.
  • Cell Imbalance Issues:
    - Confirm that all cell sampling wires are correctly connected and making good contact.
    - Use the mobile app or PC software to check individual cell voltages and the active balancing status. The active balancing feature should work to correct imbalances over time.
  • Overcharge/Overdischarge Protection Triggered:
    - Check your charger settings to ensure they match the battery pack's specifications.
    - Review the BMS parameter settings (via app/PC software) for overcharge/overdischarge voltage limits. Adjust if necessary, but always adhere to battery manufacturer recommendations.
  • Overcurrent/Short Circuit Protection Triggered:
    - Reduce the load on the battery to prevent overcurrent conditions.
    - Inspect for any short circuits in the wiring or connected equipment.
    - Check the overcurrent protection settings in the BMS software.
  • Communication Issues (Bluetooth/RS485/CAN):
    - Ensure the mobile app or PC software is updated to the latest version.
    - Verify physical connections for RS485/CAN. For Bluetooth, ensure it's enabled on your device and the BMS is discoverable.
  • Temperature Alarms:
    - Ensure the NTC sensor is correctly installed and making good contact with the battery cells.
    - Check for proper ventilation around the battery pack and BMS to prevent overheating.

If you encounter persistent issues not covered here, please refer to the Warranty and Support section for assistance.

7. Specifications

The JIKONG Smart BMS is available in several models, each with specific characteristics. Refer to the table below for detailed product parameters.

Detailed product parameter table for JIKONG Smart BMS models.
Figure 7.1: Detailed product parameter table for JIKONG Smart BMS models.
JIKONG Product Specifications (Example for JK-BD6A17S8P)
AttributeValue
Model NumberJK-BD6A17S8P/ JK-BD6A20S8P/ JK-BD6A24S8P
Accessory TypeBattery Accessories
OriginMainland China
CertificationCE
Charging Current80A
Balance FunctionActive Balanced BMS
Charge and Discharge PortCommon Port BMS
TypeLIFEPO4 Battery BMS
FunctionsOvercharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection
Charger includedN (No)
Battery IncludedNo

Model-Specific Details (JK-BD6A17S8P Example)

Specific features and specifications for the JK-BD6A17S8P model.
Figure 7.2: Specific features and specifications for the JK-BD6A17S8P model.
  • Function: BT/Display
  • BMS Type: Battery BMS
  • Balancing Current: 0.6A
  • Battery Strings: 8S-17S
  • Charge/Discharge: 80A
  • Battery Type: Li-ion/Lifepo4/LTO

8. User Tips

  • Verify Wiring Carefully: Double-check all cell voltage connections and main power lines before applying power. Incorrect wiring is a common cause of issues.
  • Utilize Monitoring Apps: Regularly use the mobile app or PC software to monitor cell voltages, temperatures, and overall battery health. This helps in early detection of potential problems.
  • Adjust Parameters Conservatively: When adjusting protection parameters (e.g., overcharge/discharge voltages), make small, incremental changes and observe the system's behavior. Always prioritize battery safety and longevity.
  • Ensure Good Ventilation: Although the aluminum shell aids heat dissipation, ensure the BMS and battery pack are installed in a well-ventilated area to prevent heat buildup, especially during high-current operation.
  • Keep Firmware Updated: Periodically check for and install firmware updates to benefit from performance improvements and bug fixes.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the JIKONG BMS FACTORY Store directly through your purchase platform or their official website. Provide your product model number and purchase details for faster assistance.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.