OLOPKY G40S

Contents

G40S Air Mouse Google Voice Remote Control User Manual

Model: G40S

1. Introduction

The OLOPKY G40S Air Mouse is a versatile 2.4G wireless remote control designed for a wide range of devices including Android TV Boxes, Smart TVs, PCs, projectors, and more. It features a built-in 6-axis gyroscope for intuitive motion sensing, a high-fidelity microphone for Google Voice Assistant, and 33 programmable keys with IR learning capabilities. This manual provides detailed instructions for setup, operation, and maintenance of your G40S Air Mouse.

2. Package Contents

Please check the box for the following items:

  • G40S Air Mouse (1 unit)
  • Nano Receiver (1 unit)
  • User Manual (1 unit)
G40S Air Mouse package contents: remote, nano receiver, and manual.
Figure 2.1: G40S Air Mouse, Nano Receiver, and User Manual.

3. Specifications

FeatureSpecification
Model NumberG40S
Wireless CommunicationRF (2.4Ghz)
UseTV, Computer, Universal, Projectors
Weight70g
ModeGFSK
Frequency2400-2483.5GHz
Distance>10M
Voltage3.0 V
Working Current<10mA
Standby Current<20uA
Dimensions (L x W x T)170mm x 45mm x 20mm (approx.)
CertificationCE
G40S Air Mouse product parameters including dimensions, weight, and electrical specifications.
Figure 3.1: Product Dimensions and Electrical Parameters.

4. Setup

4.1. Battery Installation

The G40S Air Mouse is powered by AAA batteries. Open the battery compartment cover on the back of the remote and insert two AAA batteries, ensuring correct polarity.

Diagram showing AAA battery installation and the Nano Receiver.
Figure 4.1: Battery compartment and Nano Receiver.

4.2. Connecting the Nano Receiver

Plug the included Nano Receiver into a USB port on your device (e.g., Android TV Box, PC, Smart TV). The remote control should automatically connect to the receiver. No additional drivers are typically required.

5. Operating Instructions

5.1. Motion Sensing (Air Mouse Mode)

The G40S features a built-in 6-axis gyroscope (3 Gyro + 3 Gsensor) allowing you to control the cursor by moving the remote in the air. Simply point and move the remote to navigate your screen.

Image illustrating motion sensing operation with the G40S Air Mouse, showing mouse right, mouse left, 2.4Ghz, 10m distance, gyroscope, and voice search features.
Figure 5.1: Motion Sensing Operation and Key Features.

5.2. Google Voice Assistant

The remote has a high-fidelity microphone that supports Google Assistant Voice Search. Press the dedicated voice button (often indicated by a microphone icon) and speak your commands or search queries.

Image showing the G40S remote with Google Assistant integration, highlighting the voice search feature and compatibility with Google Play Movies & TV, Google Play Music, and YouTube.
Figure 5.2: Google Voice Assistant Integration.

5.3. Indicator Lights

  • 2.4G Mode: Green indicator light is used for operation indication.
  • Infrared Mode: Red indicator light is used for operation indication.

5.4. Switching Between 2.4G and Infrared Mode

Press the [Set] button to switch between 2.4G wireless mode and infrared mode.

6. IR Learning Function (33 Keys)

The G40S Air Mouse supports IR learning for 33 keys, allowing you to program functions from your original infrared remote control. This is useful for controlling devices that do not support 2.4G wireless input.

6.1. IR Learning Steps (Example: Power Button)

  1. Press and hold the [Set] button for 3 seconds. The red LED light will flash rapidly, indicating entry into infrared programming custom mode.
  2. Select the button on the G40S remote you wish to learn (e.g., the Power button). The red indicator will change to slow flashing.
  3. Turn the emission tube of your original infrared remote control towards the emission tube of the G40S Air Mouse (approximately 2-3cm apart). Press the button on the infrared remote control that you want the G40S to learn.
  4. When the infrared code value is recognized, the red LED light on the G40S will change from long on to fast flashing, indicating that learning is complete.
  5. Press the [Set] button to exit the infrared learning mode.

6.2. Factory Reset for IR Learning

To restore the IR learning settings to factory defaults, press and hold the [Set] + [Del] buttons simultaneously for 5 seconds. The red LED will flash to confirm the reset.

Detailed instructions for 33-key IR learning, including indicator light behavior and factory reset procedure.
Figure 6.1: Infrared Learning Instructions.

7. Preset Special Modes (A, B, C Buttons)

The G40S Air Mouse comes with three preset special modes, accessible by long-pressing the A, B, or C buttons. These modes are optimized for popular streaming services and devices like Apple TV, Roku, and Vizio.

Image showing the G40S remote with three preset modes (A, B, C) for various applications like VUDU, Netflix, Amazon, YouTube, and Google Play.
Figure 7.1: Preset Special Modes (A, B, C).

8. Mouse Speed Adjustment

You can adjust the cursor speed of the air mouse to suit your preference:

  • Slower Cursor Speed: Press and hold the [OK] button and then click [VOL -]. You will achieve a slower speed successfully when the LED light changes from blinking to solid.
  • Faster Cursor Speed: Press and hold the [OK] button and then click [VOL +]. You will get a faster speed successfully when the LED light changes from blinking to solid.
Instructions for adjusting the mouse cursor speed (slower and faster) using the OK and Volume buttons.
Figure 8.1: Mouse Speed Adjustment.

9. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the remote control. Do not use liquid cleaners or abrasive materials.
  • Battery Replacement: Replace batteries when the remote's performance degrades or the indicator light signals low power. Always use new AAA batteries and dispose of old ones responsibly.
  • Storage: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.

10. Troubleshooting

  • Remote not responding:
    • Check if the batteries are correctly installed and have sufficient charge. Replace if necessary.
    • Ensure the Nano Receiver is securely plugged into a USB port on your device.
    • Try plugging the Nano Receiver into a different USB port.
    • Ensure the remote is within the 10-meter operating range of the receiver.
  • IR Learning not working:
    • Ensure the original IR remote's emission tube is 2-3cm from the G40S's emission tube during learning.
    • Make sure the original remote has fresh batteries and is functioning correctly.
    • Repeat the IR learning steps carefully.
  • Voice search not working:
    • Ensure your device (e.g., Android TV Box) has Google Assistant enabled and configured.
    • Check the device's settings to ensure the G40S microphone is recognized and allowed access.
    • Ensure there are no obstructions blocking the microphone on the remote.
  • Cursor movement is erratic:
    • Try recalibrating the gyroscope by placing the remote on a flat surface for a few seconds.
    • Adjust the mouse speed as described in Section 8.

11. Warranty and Support

For warranty information and technical support, please refer to the seller's policy or contact the point of purchase. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.