Wireless Indoor Outdoor Weather Station

Introduction

Thank you for choosing the Wireless Indoor Outdoor Weather Station. This device provides accurate measurements of indoor and outdoor temperature and humidity, along with a barometric pressure-based weather forecast, time, date, and moon phase. Its 6-inch color LED display offers clear readability and customizable alerts to keep you informed about your environment.

Key Features

• Comprehensive Display: Shows indoor/outdoor temperature and humidity (max/min, hi/lo records), time, date, moon phase, and barometric pressure.
• Weather Forecast: Provides a 6-12 hour weather forecast based on barometric pressure trends.
• Large Color LED Screen: 6-inch display with 4 levels of brightness adjustment for optimal viewing.
• Wireless Connectivity: Supports up to 3 wireless outdoor remote sensors with a transmission range of up to 200 ft (60m) in open areas.
• Customizable Alerts: Set temperature alerts for both indoor and outdoor conditions.
• USB Charging Port: Conveniently charge electronic devices directly from the weather station (requires power cord).
• Flexible Placement: Can be wall-mounted or placed on a tabletop using included hooks and adhesives.
• Alarm Clock Function: Includes an alarm clock with a 5-60 minute snooze setting.

Setup Guide

1. Powering the Devices

• Weather Station: Insert 3 AAA batteries (not included) or connect the included power adaptor to a power outlet. For continuous operation and USB charging functionality, using the power adaptor is recommended.
• Wireless Sensor: Insert 2 AA batteries (not included) into the remote sensor.

2. Sensor Placement

• Place the wireless sensor outdoors in a location protected from direct sunlight and rain, ensuring good air circulation.
• The transmission range is up to 200 ft (60m) in an open area. Avoid placing the sensor near large metal objects or electrical appliances that may interfere with the signal.
• The weather station can connect to up to 3 remote sensors. If using multiple sensors, ensure each is set to a different channel (CH1, CH2, or CH3) using the switch inside the sensor's battery compartment.

3. Initial Synchronization

• After powering both the weather station and the sensor, the station will automatically search for the sensor signal. This may take a few minutes.
• Ensure the sensor is within range of the main unit.

4. Mounting Options

• Tabletop: Use the integrated stand to place the weather station on any flat surface.
• Wall-mounted: Utilize the included 4 hooks and adhesives to mount the weather station on a wall.

Operating Instructions

Display Overview

Button Functions

• SET: Enter settings mode for time, date, alarm, etc.
• MEM: View maximum/minimum temperature and humidity records.
• ALERTS: Set and review temperature alerts.
• UP/DOWN: Adjust values in settings mode, switch between channels (CH1-3) for outdoor sensors, or cycle through display modes.
• SNOOZE/LIGHT: Activate snooze for the alarm or adjust display brightness.

Time and Date Setting

1. Press the SET button to enter time setting mode.
2. Use UP/DOWN buttons to adjust the value.
3. Press SET again to confirm and move to the next setting (e.g., 12H/24H format, hour, minute, year, month, day).
4. Press SET repeatedly until all settings are confirmed.

Temperature Unit Selection (℃/℉)

In normal display mode, press the UP button to toggle between Celsius (℃) and Fahrenheit (℉).

Display Brightness Adjustment

Press the SNOOZE/LIGHT button to cycle through 4 levels of display brightness. This allows for comfortable viewing in various lighting conditions, including at night.

Temperature Alerts

1. Press the ALERTS button to enter alert setting mode.
2. Use UP/DOWN to select indoor or outdoor alerts.
3. Press SET to configure upper and lower temperature limits.
4. Use UP/DOWN to adjust values and SET to confirm.

USB Charging Function

The weather station is equipped with a USB port (Output: 5V 1A) for charging electronic devices. Important: When using the USB charging feature, ensure the weather station is powered by its original power cord. Do NOT rely solely on batteries for power when charging other devices, as this can quickly drain the batteries and may not provide stable power.

Weather Forecast

The weather station provides a forecast for the next 6-12 hours based on changes in barometric pressure. This is an approximate indication and should not be compared to professional weather services. Always prioritize local weather forecasts for critical information.

Maintenance

• Cleaning: Wipe the weather station and sensor with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Battery Replacement: Replace batteries in both the main unit and the sensor when the low battery indicator appears on the display. Ensure correct polarity.
• Sensor Protection: The wireless sensor has an IP54 waterproof level, meaning it is protected from dust and splashing water. However, avoid submerging it in water or exposing it to heavy rain for extended periods.
• Storage: If storing the device for a long period, remove all batteries to prevent leakage.

Troubleshooting

Specifications

User Tips

• For the most accurate outdoor temperature and humidity readings, place the remote sensor in a shaded area, away from direct sunlight and heat sources. This prevents false high readings.
• When setting up multiple sensors, ensure each sensor is assigned a unique channel (CH1, CH2, CH3) to avoid interference and ensure correct data display on the main unit.
• If you experience connectivity issues, try moving the outdoor sensor closer to the main unit or repositioning both devices to minimize obstructions.
• To prolong battery life, especially in the outdoor sensor, consider using high-quality alkaline batteries.

Warranty and Support

This product is designed for reliable performance. For any technical assistance or warranty inquiries, please contact the seller or retailer from whom you purchased the product. Please retain your proof of purchase for warranty claims.

For further support, refer to the contact information provided by your point of purchase.