Linkgo Minion Connection Building Blocks User Manual

1. Introduction

Thank you for choosing Linkgo Minion Connection Building Blocks. This manual provides essential information for the assembly, use, and maintenance of your new building block figures. These sets allow you to construct detailed 3D models of popular Minion characters using micro self-locking bricks made from safe and environmentally friendly ABS plastic.

Each set comes with all necessary pieces to build one figure. Please read these instructions carefully before beginning assembly.

2. Safety Information

• Choking Hazard: This product contains small parts (micro building blocks) and is not suitable for children under 3 years old. Recommended age for assembly and play is 18+.
• Warning: Can not eat. Keep blocks away from mouth.
• Chemical Warning: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
• Always supervise younger individuals if they are handling the blocks, even if above the recommended age.

3. Package Contents

Each Linkgo Minion Connection Building Block set typically includes:

• Micro building block pieces required for one figure.
• Assembly instructions (may be included within the box).
• Optional: Display box (depending on the specific model variant purchased).

4. Specifications

Figure Dimensions:

• Model 68355 (King Minion): Approximately 13.4cm (Height) x 9.5cm (Width)
• Model 68357 (Ice Cream Minion): Approximately 11.0cm (Height) x 9.0cm (Width)
• Model 68358 (Pilot Minion): Approximately 12.6cm (Height) x 9.0cm (Width)

5. Setup and Assembly

These building block sets require self-assembly. Follow the steps below and refer to the included visual instructions for your specific model.

General Assembly Steps:

1. Unpack: Carefully open the package and empty all contents onto a clean, flat surface. Ensure no small pieces are lost.
2. Identify Pieces: Sort the blocks by color, size, or shape if necessary, to make the assembly process easier.
3. Follow Instructions: Refer to the step-by-step pictorial instructions provided with your set. Each step will show which blocks to use and where to place them.
4. Connect Blocks: Firmly press the blocks together to ensure a secure connection. Micro blocks require precision.
5. Verify: After completing each section or the entire figure, double-check against the images to ensure all blocks are correctly placed.

Visual Guides for Assembly:

Below are images of the assembled figures and their approximate dimensions to assist with identification and completion.

6. Operating Instructions

Once assembled, your Linkgo Minion figures are ready for display or gentle play. There are no electronic components or moving parts that require specific operation.

• Display: Place your assembled figures on a stable surface for decoration.
• Play: Handle the figures gently to avoid dislodging blocks. Avoid throwing or dropping the figures.

7. Maintenance

• Cleaning: To clean your assembled figures, gently wipe them with a soft, slightly damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Storage: Store disassembled blocks or assembled figures in a cool, dry place away from direct sunlight to prevent material degradation or discoloration. Keep them in a container to prevent loss of small pieces.
• Disassembly: If disassembling, do so carefully to avoid damaging the connection points of the blocks.

8. Troubleshooting

• Missing Pieces: If you discover any missing pieces upon opening the package, please contact the seller immediately for assistance.
• Difficulty Assembling: Ensure you are following the instructions precisely. Sometimes, blocks need to be oriented in a specific direction or pressed firmly to connect. If a step seems impossible, re-examine the previous steps.
• Loose Connections: If parts of your figure feel loose, gently press the connected blocks together again to secure them.

9. User Tips

• Organize Your Workspace: Before starting, lay out all pieces on a clean, well-lit surface. Sorting by color or shape can significantly speed up assembly.
• Patience is Key: Micro building blocks require patience and attention to detail. Don't rush the assembly process.
• Use a Tool (Optional): For very tight connections or disconnections, a small plastic block separator tool (not included) can be helpful, but use with care to avoid damage.

10. Warranty and Support

For any product-related inquiries, support, or issues, please contact the seller directly through your purchase platform. Keep your order details handy for faster service.