VASAGLE Electric Height Adjustable Desk

1. Introduction

Thank you for choosing the VASAGLE Electric Height Adjustable Desk. This desk is designed to provide a versatile and ergonomic workspace, allowing you to effortlessly switch between sitting and standing positions. Featuring a robust motor, memory presets, integrated power solutions, and thoughtful storage, this desk enhances productivity and comfort. Please read this manual carefully before assembly and use to ensure safe and optimal operation.

2. Important Safety Instructions

Failure to follow these safety instructions may result in injury or damage to the product.

• Ensure there are no obstacles in the desk's path when adjusting the height.
• Do not place the desk directly against a wall to prevent scratching the wall during height adjustment.
• This product is intended for indoor use only. Keep all electronic accessories away from liquids.
• After continuous height adjustment for 2 minutes, allow the motor to rest for at least 18 minutes to prevent damage.
• To protect the tabletop from impacts and scratches, adjust the integrated sensor to a higher value to detect obstacles during height adjustment.
• The maximum static load capacity of the desk is 80 kg (176 lbs). Do not exceed this limit.
• Do not use power outlets or adapters with excessively high voltage. Refer to the specifications for correct voltage and amperage.
• Keep children and pets away from the desk during operation.

3. Package Contents

Your VASAGLE Electric Height Adjustable Desk is delivered in two separate cartons. Please note that these cartons may arrive at different times. If you receive only one package, please wait patiently for the second one.

Please verify that all components listed below are present:

• 1 x Desk (Tabletop and Frame Components)
• 1 x Control Box
• 1 x Drawer
• 1 x Integrated Power Strip (with 2 outlets and 2 USB ports)
• 1 x Headphone Hook
• 4 x Casters (optional replacement for adjustable feet)
• 1 x Assembly Kit (hardware and tools)
• 1 x Instruction Manual (this document)

4. Assembly and Setup

Detailed assembly instructions are provided in the included assembly kit. Please follow the step-by-step guide carefully. Below are general guidelines and important considerations:

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
2. Assemble Frame: Follow the instructions to assemble the desk frame, ensuring all screws are tightened securely.
3. Attach Tabletop: Secure the tabletop to the assembled frame.
4. Install Drawer and Hook: Attach the drawer and headphone hook as indicated in the manual.
5. Wiring: Connect the motor, control box, and integrated power strip according to the wiring diagram. Ensure all connections are firm and secure.

6. Install Feet/Casters: Attach the adjustable feet or, if preferred, replace them with the included casters. If using casters, ensure the brakes are engaged for stability.
7. Cable Management: Utilize the integrated cable management features to keep wires tidy and prevent tangles.

5. Operating Instructions

5.1 Height Adjustment

The desk's height can be continuously adjusted between 72 cm (28.3 inches) and 120 cm (47.2 inches). The adjustment mechanism operates with very low noise, typically less than 50 dB.

5.2 Control Panel

The control panel, typically located on the front edge of the desk, features:

• Up/Down Arrows: Press and hold to manually adjust the desk height.
• M1-M4 Buttons: These are memory preset buttons.
• LED Display: Shows the current desk height in centimeters.

5.3 Memory Presets

You can save up to four preferred heights for quick adjustment:

1. Adjust the desk to your desired height using the Up/Down arrows.
2. Press one of the memory buttons (M1, M2, M3, or M4) until the LED display flashes or indicates that the height has been saved.
3. To recall a saved height, simply press the corresponding memory button. The desk will automatically move to that position.

5.4 Integrated Power Strip

The desk includes a built-in power strip with 2 standard outlets (220V-250V, 15A-16A) and 2 USB ports. This allows you to power and charge your devices conveniently directly from your desk, reducing cable clutter.

5.5 Storage Features

• Drawer: A small drawer (22.7 x 32.5 x 4.0 cm) is provided for storing office supplies, and a larger top drawer can accommodate a laptop or documents.
• Headphone Hook: A convenient hook is available to hang your headphones, keeping them within reach and off the desk surface.

6. Maintenance

• Cleaning: Wipe the desk surface and frame with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners that could damage the finish.
• Motor Care: As noted in safety instructions, allow the motor to rest after 2 minutes of continuous adjustment to prolong its lifespan.
• Cable Inspection: Periodically check all cables and connections for any signs of wear or damage. Ensure they are securely plugged in.
• Hardware Check: Occasionally check and tighten any loose screws or fasteners to maintain stability.

7. Troubleshooting

7.1 Desk Not Adjusting Height

• Power Connection: Ensure the desk is properly plugged into a working power outlet.
• Motor Overload: If the desk was recently adjusted continuously for more than 2 minutes, the motor may be in a protective rest mode. Wait at least 18 minutes before attempting to adjust the height again.
• Obstacles: Check for any obstructions under or around the desk that might be preventing movement. The integrated sensor may have detected an obstacle.
• Weight Limit: Ensure the total weight on the desk does not exceed the maximum static load capacity of 80 kg.

7.2 Unusual Noises During Adjustment

• The desk is designed for quiet operation (< 50 dB). If you hear unusual or loud noises, check for loose components or obstructions.
• Ensure the desk is on a level surface and all feet/casters are properly adjusted.

7.3 Power Outlets/USB Ports Not Working

• Verify the main power connection to the desk.
• Check the integrated power strip's connections to the control box and main power.
• Ensure devices are properly plugged into the outlets/USB ports.

8. Specifications

9. User Tips

• Utilize Memory Presets: Save your ideal sitting and standing heights using the M1-M4 buttons for quick and convenient transitions throughout your workday.
• Regular Movement: Make it a habit to switch between sitting and standing positions regularly to improve circulation and reduce fatigue.
• Cable Management: Take advantage of the integrated cable management features to keep your workspace tidy and prevent tripping hazards.
• Obstacle Sensor Adjustment: If you frequently have items under your desk, consider adjusting the obstacle sensor sensitivity to prevent accidental collisions during height changes.
• Caster Use: If you need to move your desk frequently, install the casters. Remember to engage the brakes when the desk is in position to ensure stability.

10. Warranty and Support

The VASAGLE Electric Height Adjustable Desk comes with a 3-year warranty on its motor and frame components, ensuring long-lasting performance and reliability.

For warranty claims, technical support, or any questions regarding your product, please contact the seller or VASAGLE customer service directly. Please have your purchase receipt and product model information ready when contacting support.