ANDELI BY950T-1

Contents

ANDELI Electric Welding Helmet User Manual

Model: BY950T-1

Brand: ANDELI

1. Introduction

Thank you for choosing the ANDELI Electric Welding Helmet BY950T-1. This auto-darkening welding helmet is designed to provide superior protection and enhanced visibility for various welding and grinding applications, including TIG, MIG, Arc welding, and grinding. It features a large true color viewing screen, four arc sensors, and adjustable LED strip lights to ensure optimal performance and user comfort. Please read this manual thoroughly before use to ensure safe and proper operation.

2. Safety Information

WARNING: Failure to follow these safety instructions may result in serious personal injury or death.

  • Always wear appropriate personal protective equipment (PPE) in addition to the welding helmet, including safety glasses, gloves, and protective clothing.
  • Ensure the helmet is properly adjusted and fits securely before beginning any work.
  • Do not use the helmet if any part is damaged or appears to be malfunctioning.
  • The auto-darkening filter (ADF) is designed to protect against harmful UV/IR radiation even in the light state. However, always ensure the filter darkens properly before welding.
  • Avoid direct exposure to welding arc without proper eye protection.
  • Do not immerse the helmet in water or other liquids.
  • Clean the helmet and lenses regularly as per maintenance instructions.
  • Keep the helmet away from children and unauthorized users.

3. Package Contents

Verify that all items are present and in good condition upon unpacking:

  • 1 x ANDELI Electric Welding Helmet
  • 1 x External Protective Lens
  • 1 x Internal Protective Lens
  • 1 x Convenient Storage Bag
Package contents of ANDELI welding helmet including helmet, external and internal protective lenses, and a storage bag.
Figure 3.1: Included Accessories

4. Product Features

  • True Color Lens Technology: Provides vivid and vibrant visuals, reducing the traditional lime green tint for improved clarity and visibility. Optic Class: 1/1/1/2.
  • Large Viewing Area: 3.94 inches x 3.74 inches (approximately 10 cm x 9.5 cm) for an expansive field of view.
  • Fast Auto-Darkening: Equipped with 4 premium arc sensors for a rapid 1/25000S response time to arc ignition.
  • Dual LED Strip Lights: Unique design with double strip lights for brighter and wider illumination of the workspace. Features three adjustable light intensities.
  • Multiple Operating Modes: Supports Grind Mode (DIN 4), Cut Mode (DIN 5-9), and Weld Mode (DIN 9-13).
  • Adjustable Controls: Dials for Shade, Mode, Sensitivity (Low, Middle, High), and Delay (Slow, Fast).
  • Solar Powered with Type-C Charging: Utilizes a solar absorbing plate for primary power and includes a Type-C port for charging, providing up to 4.5 hours of operation on a full charge (charging cable not included).
  • UV/IR Protection: Permanent DIN16 protection against harmful ultraviolet and infrared radiation.
  • Comfortable Headgear: Features a super large silicone cushion and adjustable straps for a secure and comfortable fit, reducing pressure points and weariness. The helmet angle can be adjusted from 101° to 130°, and fore and aft movement can also be adjusted.
  • Durable Material: Constructed from high-quality PP (Polypropylene) material.
  • Certifications: CE certified.
Summary of ANDELI welding helmet features including brightness, view angle, Type-C charging, arc sensors, UV/IR protection, and true color technology.
Figure 4.1: Key Features Overview
Comparison of True Color Technology lens versus traditional non-true color lens, showing clearer view.
Figure 4.2: True Color Technology

5. Specifications

AttributeSpecification
ModelBY950T-1
BrandANDELI
Power SupplyBattery (Solar Powered)
View Area3.94" x 3.74" (10 cm x 9.5 cm)
Switch Time1/25000S
Auto-DarkeningYes
Arc Sensors4
Helmet MaterialPP (Polypropylene)
Optic Class1/1/1/2
UV/IR ProtectionDIN16
Charging InterfaceType-C (cable not included)
Battery Life (LED)Up to 4.5 hours on full charge
Package Length35 cm
Package Width27 cm
Package Height27 cm
Package Weight1.95 kg
CertificationCE

6. Setup

6.1 Headgear Adjustment

The helmet features a comfortable and highly adjustable headgear system to ensure a perfect fit and balance, which is crucial for long periods of use.

  1. Size Adjustment: Use the knob at the back of the headgear to tighten or loosen the headband for a snug fit around your head.
  2. Angle Adjustment: The helmet's viewing angle can be adjusted from 101° to 130°. Loosen the side knobs, position the helmet to your desired angle, and then re-tighten the knobs.
  3. Fore and Aft Movement: Adjust the distance between your face and the lens by using the adjustment mechanism on the headgear. This helps optimize your field of vision and comfort.
Diagram showing the adjustable headgear of the ANDELI welding helmet, highlighting the 130-degree adjustment range.
Figure 6.1: Comfortable and Adjustable Headgear

6.2 Protective Lens Installation

The helmet comes with external and internal protective lenses. These should be installed to protect the auto-darkening filter from scratches, spatter, and dust.

  1. Carefully remove any existing protective films from the new lenses.
  2. Insert the external protective lens into the outer frame of the helmet.
  3. Insert the internal protective lens into the inner frame, ensuring it sits flush against the auto-darkening filter.

6.3 Charging the LED Lights

The helmet's LED strip lights are powered by a rechargeable battery. While the helmet is primarily solar-powered for the auto-darkening function, the LED lights require charging via the Type-C port.

  • Locate the Type-C charging port on the top of the helmet.
  • Connect a Type-C charging cable (not included) to the port and a suitable power source.
  • A full charge takes approximately 4.5 hours.
Close-up of the Type-C charging port on the ANDELI welding helmet, indicating a 4.5-hour charge time and that the cable is sold separately.
Figure 6.2: Type-C Charging Interface

7. Operating Instructions

7.1 Controls Overview

The helmet features intuitive controls on the side for adjusting various settings:

Diagram showing the control panel on the side of the ANDELI welding helmet, indicating dials for Shade, Mode, Sensitivity, and Delay.
Figure 7.1: Control Panel
  • Shade/Mode Dial: Adjusts the darkness level and selects the operating mode (Grind, Cut, Weld).
  • Delay Dial: Controls the time it takes for the filter to return to the light state after welding stops (Slow/Fast).
  • Sensitivity Dial: Adjusts the sensitivity of the arc sensors to ambient light and arc intensity (Low/Middle/High).

7.2 Selecting Operating Mode and Shade

Rotate the Shade/Mode dial to select the appropriate setting for your task:

  • Grind Mode: Set to DIN 4. The auto-darkening function is deactivated, providing a clear view for grinding operations.
  • Cut Mode: Adjustable from DIN 5 to DIN 9. Suitable for plasma cutting and similar applications.
  • Weld Mode: Adjustable from DIN 9 to DIN 13. Use for TIG, MIG, and Arc welding. Select a shade level appropriate for the amperage and type of welding.
Illustration of the three adjustable modes: Grind (DIN 4), Cut (DIN 5-9), and Weld (DIN 9-13) with visual examples.
Figure 7.2: Adjustable Operating Modes

7.3 Adjusting Sensitivity and Delay

  • Sensitivity: Adjust the sensitivity dial to ensure the filter darkens reliably when an arc is struck, but does not react to other light sources. High sensitivity is suitable for low amperage TIG welding.
  • Delay: Set the delay dial to control how quickly the filter returns to the light state after the arc is extinguished. A longer delay is recommended for high amperage welding to prevent eye fatigue from residual glow.

7.4 Using the LED Strip Lights

The helmet's integrated LED strip lights provide additional illumination for your workspace.

  • Power On/Off: Press the 'Light switch' button on the top of the helmet to turn the lights on or off.
  • Brightness Adjustment: Use the 'Brightness adjustment button' to cycle through three levels of light intensity (High, Medium, Low).
Close-up of the top of the helmet showing the light switch and brightness adjustment buttons for the LED lights.
Figure 7.3: LED Light Controls

Video 7.1: Product Demonstration and Feature Overview

8. Maintenance

8.1 Cleaning

  • Helmet Shell: Clean the helmet shell with a mild soap and water solution. Avoid harsh chemicals or abrasive cleaners.
  • Protective Lenses: Wipe the external and internal protective lenses with a soft, clean cloth. If heavily soiled, use a lens cleaning solution specifically designed for plastic lenses. Replace scratched or pitted lenses immediately.
  • Auto-Darkening Filter (ADF): The ADF should only be cleaned with a soft, lint-free cloth. Do not use any cleaning solutions on the ADF itself.

8.2 Storage

Store the welding helmet in the provided storage bag in a clean, dry place away from direct sunlight, extreme temperatures, and corrosive materials.

8.3 Battery Care

The helmet's auto-darkening function is solar-powered, but the internal battery for the LED lights benefits from regular charging. If the helmet is stored for extended periods, ensure the LED battery is charged periodically to maintain its lifespan.

9. Troubleshooting

  • Helmet does not darken:
    • Ensure the arc sensors are clean and unobstructed.
    • Check if the helmet is set to 'Grind' mode; switch to 'Cut' or 'Weld' mode.
    • Verify sufficient ambient light for the solar panel to charge the internal battery.
    • If the low battery indicator is on (visible on the ADF, see Figure 7.1), charge the LED battery via Type-C.
  • Poor visibility through the lens:
    • Clean the external and internal protective lenses. Replace if scratched or damaged.
    • Ensure the True Color lens is clean.
  • LED lights not working:
    • Check if the LED battery is charged. Connect to a Type-C charger.
    • Ensure the light switch is pressed.
  • Helmet feels uncomfortable or unstable:
    • Adjust the headgear size, angle, and fore/aft movement as described in Section 6.1.

10. User Tips

  • True Color Experience: The helmet's true color lens technology is designed to provide a more natural view. If you notice any greenish tint, ensure your lenses are clean and that you are using the correct shade setting for your application.
  • Spare Parts: In case of damage to components like protective lenses or the auto-darkening filter, contact ANDELI customer support or your seller for genuine replacement parts.
  • Optimal Visibility: Utilize the adjustable LED strip lights in dimly lit environments to improve visibility of your workpiece before striking an arc. Adjust the brightness to suit your needs.

11. Warranty and Support

The ANDELI Electric Welding Helmet BY950T-1 is manufactured to high-quality standards and is CE certified. For any questions, technical assistance, or warranty claims, please contact the ANDELI Official Store or your authorized reseller. Please provide your product model (BY950T-1) and purchase details when seeking support.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.