1. Introduction
The DIANQI ZS9-VASK is an automatic over voltage and current protector socket designed to safeguard your electrical appliances from power fluctuations. It features adjustable voltage and current protection thresholds, an LED display for real-time monitoring, and automatic reclosing capabilities. This manual provides detailed instructions for its safe and effective use.
2. Product Overview
2.1 Key Features
- Overvoltage and Undervoltage Protection
- Overcurrent Protection
- Adjustable Protection Thresholds
- Real-time Voltage and Current Display
- Automatic Reclosing Function
- Power-on and Recovery Delay Settings
- Password Protection for Settings
2.2 Product Dimensions
The protector is available in different plug types, including EU and Universal AU. Below are the general dimensions:
Figure 1: Dimensions of the EU Plug Protector
Figure 2: Dimensions of the Universal AU Plug Protector
2.3 Plug Types
The device is available in various plug configurations to suit different regional standards:
- EU Plug
- Universal AU Plug
- Other types (e.g., UK, US) may be available depending on the model.
Figure 3: EU and Universal AU Plug Versions
3. Setup and Installation
3.1 Unboxing and Initial Inspection
Upon receiving your DIANQI ZS9-VASK protector, carefully remove it from its packaging. Inspect the device for any signs of damage. Ensure all components are present.
Video 1: Unboxing and initial setup demonstration.
3.2 Connecting the Protector
- Plug the DIANQI ZS9-VASK protector directly into a suitable wall socket.
- Ensure the wall socket matches the protector's plug type (e.g., EU plug into an EU socket).
- Once plugged in, the LED display on the protector will illuminate, showing the current voltage and current readings.
- Connect your appliance's power cord into the socket on the front of the protector.
4. Operation
4.1 Basic Controls
The protector features a display and several buttons for operation:
- Power Button (Red): Short press to turn the device ON/OFF. Long press (5 seconds in OFF mode) to reset all parameters to factory defaults and turn on.
- 'M' Button (Menu): Used to enter and navigate the setup menu.
- Up Arrow Button (>V): Used to increase values or navigate through menu options. Also used for quick voltage adjustment (short press in ON mode).
- Down Arrow Button (
4.2 Display Modes
The device displays real-time voltage (V) and current (A) readings. You can toggle between display modes using the Up/Down arrow buttons as per the setup menu (P15).
4.3 Setup Menu (Parameter Configuration)
To access the setup menu, press the 'M' button. Use the Up/Down arrow buttons to navigate through the parameters (P1 to P20) and adjust their values. Press 'M' again to confirm a setting or move to the next parameter. The following table details the available parameters:
| Code | Option | Set Range | Default |
|---|---|---|---|
| P1 | Power-on delay | 1-999s | 5s |
| P2 | Recovery delay | 1-999s | 30s |
| P3 | Overvoltage | 130-300V | 270V |
| P4 | Overvoltage recovery value | 125-295V | 265V |
| P5 | Undervoltage | 80-210V | 170V |
| P6 | Undervoltage recovery value | 85-215V | 175V |
| P7 | Overvoltage action delay | 0.1-10.0s | 0.5s |
| P8 | Voltage correction | -10% - +10% | 0V |
| P9 | Overcurrent | 1-16A | 63.0A |
| P10 | Overcurrent action delay | 0.1-10.0s | 1.0s |
| P11 | Continuous overcurrent counting | 0-20 times | 0 times |
| P12 | Current correction | -10% - +10% | 0A |
| P13 | Frequency correction | -2.5% - +2.5% | 0Hz |
| P14 | Quick power-off protection | ON/OFF | ON |
| P15 | Display mode | 1: Standard, 2: Manual switch, 3: Auto switch | 1: Standard |
| P16 | Automatic reset | ON/OFF | ON |
| P17 | Action/Knife mode | ON/OFF | ON |
| P18 | Energy saving mode | ON/OFF | OFF |
| P19 | Set password lock | 000-999 | 112 |
| P20 | Change password lock | 000-999 | 112 |
5. Maintenance
To ensure optimal performance and longevity of your DIANQI ZS9-VASK protector, follow these simple maintenance guidelines:
- Keep the device clean and dry. Avoid exposure to moisture or extreme temperatures.
- Do not attempt to open or repair the device yourself, as this will void any potential warranty and may pose a safety risk.
- Regularly check the plug and socket for any signs of wear or damage.
6. Troubleshooting
6.1 Common Issues and Solutions
- Device remains in protection state: This can occur if the overvoltage threshold (P3) is set lower than the undervoltage threshold (P5). Ensure P3 > P5.
- Unable to change settings: If the password lock (P19) value is not 112, you can only view parameters, not modify them. To change settings, ensure P19 is set to the correct value (default 112). P20 will only appear when P19 is correct.
- Inaccurate voltage/current readings: The device allows for voltage (P8) and current (P12) correction. Refer to the 'User Tips' section for calibration guidance.
7. Specifications
| Parameter | Value | Accuracy |
|---|---|---|
| Model Number | ZS9-VASK | N/A |
| Material | ABS | N/A |
| Origin | Mainland China | N/A |
| Effective Voltage Range | AC 80-300V | 1% |
| Effective Current Range | AC 0.1-63.0A | 1% |
| Frequency Range | 40-70Hz | 1% |
| Screen Refresh Rate | >1000Hz | N/A |
| Table Update | 0.1-1.0s | N/A |
| Voltage/Undervoltage Backlash | 5V | N/A |
| Timer Range | 1-999s | N/A |
| Power Off Time | 0.1-10.0s | N/A |
