1. Introduction
The JIKONG Smart BMS (Battery Management System) is an intelligent protection board designed for large-capacity series lithium battery packs. It integrates essential functions such as voltage acquisition, high-current active balancing, overcharge, over-discharge, overcurrent, over-temperature protection, coulomb metering, Bluetooth communication, and optional GPS remote capabilities.
This BMS utilizes energy transfer active balancing technology, capable of achieving a continuous 1A/2A balancing current. This high-efficiency balancing ensures battery consistency, extends battery life, and improves overall performance. It is suitable for various battery types including LiFePo4, Li-Ion, and LTO.
The system is supported by a mobile application compatible with both Android and iOS operating systems. The APP allows users to monitor battery status in real-time, modify working parameters, and control charge/discharge switches. Its compact size, ease of operation, and comprehensive features make it ideal for a wide range of applications, including small sightseeing vehicles, mobility scooters, shared cars, high-power energy storage systems, base station backup power supplies, and solar power stations.
2. Safety Precautions
- Always ensure correct wiring according to the provided diagrams. Incorrect wiring can lead to damage to the BMS, battery, or connected devices.
- Verify all connections are secure before powering on the system.
- Do not attempt to open or modify the BMS unit. This may void the warranty and cause malfunction.
- Keep the BMS away from water, moisture, and extreme temperatures.
- Ensure adequate ventilation around the BMS to prevent overheating.
- In case of any abnormal behavior, disconnect the power immediately and consult the troubleshooting section or contact support.
3. Package Contents
Please check the package for the following items:
- JIKONG Smart BMS Unit
- Operating Manual
- NTC Temperature Sensor (40cm)
- Switch (50cm)
- Balance Wires (70cm)
- Pack Box
- Screws (4 pieces, included with some models)


4. Specifications
4.1. General Parameters
| Parameter | Value | Unit |
|---|---|---|
| Supply Voltage | 7.5-36 | V |
| Operating Power Consumption | <900 | mW |
| Operating Temperature | -30-70 | °C |
| Max. Number of Collection Strings | 8 | String |
| Max. Balancing Current | 1A / 2A | A |
| Max. Charging Current | 200 | A |
| Max. Discharge Current | 200 | A |
| Max. Instantaneous Current | 400 | A |
| Max. Internal Loop Resistance | 0.35 | mΩ |
| Finished Weight | 424 | g |
4.2. Default Parameters
| Parameter | Li-Ion | LiFePo4 | LTO | Unit |
|---|---|---|---|---|
| Balancing Initial Voltage | 3 | 3 | 2 | V |
| Max. Balancing Current | 1 / 2 | 1 / 2 | 1 / 2 | A |
| Unit Overcharge Voltage | 4.2 | 3.6 | 2.7 | V |
| Single Overcharge Protection Recovery | 4.18 | 3.55 | 2.65 | V |
| Monomer Undervoltage Protection | 2.82 | 2.6 | 1.8 | V |
| Single Undervoltage Protection Recovery | 2.85 | 2.65 | 1.85 | V |
| Automatic Shutdown Voltage | 2.8 | 2.5 | 1.7 | V |
| SOC-0% Voltage | 2.9 | 2.6 | 1.85 | V |
| SOC-100% Voltage | 4.18 | 3.5 | 2.65 | V |
| Trigger Balancing Differential Pressure | 0.01 | 0.01 | 0.01 | V |
| Charging Overcurrent Protection Delay | 30 | 30 | 30 | S |
| Charge Overcurrent Protection Release Time | 60 | 60 | 60 | S |
| Discharge Overcurrent Protection Delay | 300 | 300 | 300 | S |
| Discharge Overcurrent Protection Release Time | 60 | 60 | 60 | S |
| Short-circuit Protection Delay | 5 | 5 | 5 | uS |
| Short-circuit Protection Release Time | 30 | 30 | 30 | S |
| Charging Overtemperature Protection | 70 | 70 | 70 | °C |
| Charging Overtemperature Recovery | 60 | 60 | 60 | °C |
| Discharge Overtemperature Protection | 70 | 70 | 70 | °C |
| Discharge Overtemperature Recovery | 60 | 60 | 60 | °C |
| Charging Low Temperature Protection | -20 | -20 | -20 | °C |
| Charging Low Temperature Recovery | -10 | -10 | -10 | °C |
| MOS Overtemperature Protection | 100 | 100 | 100 | °C |
| MOS Overtemperature Recovery | 80 | 80 | 80 | °C |
| Device Address | 0 | 0 | 0 | / |
4.3. Dimensions
- JK-BxA8S-20P Series: 152.25mm × 127.26mm × 15.6mm
- BD6A20S10P, B2A24S15P, B2A20S20P, B2A24S20P: 162mm x 102mm x 16.6mm
- BD6A17S6P, BD6A20S6P, BD6A24S6P, BD6A17S8P, BD6A20S8P, BD6A24S8P: 116mm x 74mm x 17.6mm


5. Setup
5.1. Wiring Diagram
The JIKONG BMS is suitable for 3-8 series lithium battery packs. The specific wiring method varies depending on the number of cells in your battery pack. Always refer to the following diagrams for correct connection.


5.2. Interface Definitions
The BMS features various interfaces for communication, sensors, and control. Below are the common interfaces and their functions:


P1 (XH-10AW-2.54) - Balance and Acquisition Interface:
- B-: Total negative battery.
- B1-B8: Positive terminals for individual battery strings (1st to 8th).
- B+: Protection board power supply, connected to the total positive of the battery.
P2 (A1254WF-2A) - Buzzer Interface (Optional):
- GND: Buzzer power negative.
- VCC: Buzzer power positive.
P3 (A1254WF-4A) - Communication Interface (Optional):
- CAN_L / CAN_H: CAN signal negative/positive terminals.
- RS485_A / RS485_B: RS485 signal positive/negative terminals.
P4 (1.25T-4PWT) - GPS Interface:
- GND: Power/signal ground.
- RX / TX: UART RX/TX, 3.3V.
- VGPS: Power output, voltage close to B+.
P5 (HY2.0-4P) - 4-Way External Temperature Sensor Interface (Optional):
- T5A / T5B: 5th temperature sensor pin A/B.
- T4A / T4B: 4th temperature sensor pin A/B.
P6 (HY2.0-4P) - Temperature Interface:
- T2A / T2B: 2nd temperature sensor pin A/B.
- T1A / T1B: 1st temperature sensor pin A/B.
P7 (A1254WF-6A) - Display Interface:
- VCC: Display power output.
- A / B: Display RS485 signal positive/negative.
- GND: Power negative terminal.
- K+ / K-: Activate positive/negative signal.
P8 (A1254WF-3A) - Parallel Interface (Optional):
- P-status: Parallel module status signal.
- P-EN: Parallel module enable signal (output low level to turn on parallel module).
- GND: Signal ground.
P9 (A1254WF-5A) - ACC Interface (Optional):
- ACC+ / ACC-: ACC positive/negative.
- NC: Not connected.
- C_Detect+ / C_Detect-: Charger output 12V positive/negative.
Heating Wire (16AWG-Orange-15CM):
- HT-: Heater element negative electrode.
D1 - Bluetooth Connection Indicator:
- Steady on when Bluetooth is connected, blinking when disconnected.
P- / B-:
- P-: Connect to external load or negative terminal of charger (M6 screws).
- B-: Connect to the negative battery terminal (M6 screws).
6. Operating Instructions
6.1. Initial Setup and Activation
- Hardware Connection: Connect the protection board and battery pack according to the wiring diagram. Ensure the last power cord is connected to the main positive pole. The total voltage of the battery pack must be greater than 20V (for default BMS) or 10V (for 4S BMS) before starting up.
- BMS Activation: Use the display activation button or an additional switch to activate the BMS. Alternatively, connect a charger with a voltage 2V higher than the battery pack voltage to activate the BMS.
- APP Installation: Download the mobile APP. For iOS, search "JIKONG BMS" in the APP Store. For Android, search "JK BMS" in the Google Play Store.
- APP Connection: Turn on GPS and Bluetooth on your mobile phone. Open the APP, click the top left corner to search for devices, and select your device. The default password is 1234.
- Parameter Setting: For the first startup, parameters need to be set. The default password for parameter setting is 123456. Set the number of units (strings) and battery type (LiFePo4, Li-Ion, LTO).
- Check Battery Status: After setting the parameters, return to the real-time status page to check the battery status. Ensure no error messages are prompted and the operation is normal. Blue indicates the highest voltage, and red indicates the lowest voltage.


7. Key Features
7.1. Active Equalization
The BMS employs active equalization technology to transfer energy from higher-voltage cells to lower-voltage cells, ensuring battery consistency. Users can set the balance trigger pressure difference via the APP. The default balance current is 1A/2A, adjustable based on battery capacity (recommended not to exceed 0.2C).
7.2. Protection Functions
The JIKONG Smart BMS provides comprehensive protection for your battery pack:
- Overcharge Protection: Prevents over-charging by cutting off charging when any cell exceeds the set overcharge voltage.
- Over-discharge Protection: Prevents over-discharging by cutting off discharge when any cell falls below the set undervoltage protection.
- Overcurrent Protection (Charge/Discharge): Protects against excessive current during charging and discharging. Parameters like continuous current, delay, and release time are configurable.
- Over-temperature Protection: Monitors battery temperature and cuts off charge/discharge if it exceeds safe limits.
- Low Temperature Protection: Prevents charging at dangerously low temperatures.
- Short Circuit Protection: Automatically protects the battery in case of a short circuit. Configurable delay and recovery times.
- Emergency Switch: Allows temporary override of protection functions for 30 minutes in critical situations (e.g., over-temperature, over-discharge, over-charge, string drop) to prevent roadside breakdowns.

7.3. Smart Energy Working Modes
The BMS supports various working modes to optimize battery usage and longevity:
- Storage Mode: When in transportation, offline, or wireless transmission off mode, the BMS enters storage mode, consuming no battery pack current.
- Normal Working Mode: When the charger is inserted in storage mode and off mode, the BMS immediately returns to normal working mode, and all protection, equalization, and communication functions are active.
- Standby Mode: If the battery pack is in a static state (no charge/discharge current and no equilibrium current) for a set period (e.g., 30 days), the BMS automatically enters standby mode.
- Shutdown: To prevent power waste and battery damage during long periods of inactivity, the BMS automatically shuts down if a cell falls below the shutdown voltage.

7.4. Optional Functions
- GPS/Display Interface: The BMS reserves a GPS port for location tracking and a display interface for viewing battery information.
- Heating Function: Optional heating function for low-temperature environments, using a resistance heater or heating film to prevent reduced battery activity. Designed heating current is 20A.
- Alarm Function: Provides external alarm alerts when the BMS detects safety risks like over-temperature, overcharge, or over-discharge.
- Battery Pack Parallel Function: Supports parallel connection of battery packs for energy storage applications, requiring synchronous use with parallel modules.
- ACC Detection Function: Enables discharge based on ACC signal detection.
- Intelligent Sleep: Standard intelligent sleep function to reduce BMS power consumption during standby.
- Communication Functions (CAN/RS485): Supports optional CAN and RS485 communication, configurable via the APP.

8. Troubleshooting
8.1. BMS Does Not Turn On
- Ensure that the last "B+" line of the cable is connected to the positive pole of the battery.
- Start up after charging and ensure that the charger voltage is greater than 4V of the battery pack voltage.
- Check whether the charger has voltage output.
8.2. Inaccurate Voltage Readings
- Measure the actual total pressure of the battery pack with a multimeter and input this value into the "voltage calibration" setting on the parameter setting page in the APP.
8.3. Inaccurate Current Readings
- Ensure that both the B- and P- terminals of the protection board are connected with two 7AWG wires in parallel. Failure to do so will lead to current errors.
- Measure the actual current of the battery pack with a clamp meter and input this value into the "current calibration" setting on the parameter setting page in the APP. A larger actual current generally leads to higher calibration accuracy.
8.4. Inaccurate Capacity Readings
- Initial capacity estimated based on monomer voltage when the protection board is first powered on may be inaccurate.
- To calibrate capacity, fully discharge the protection board to the cut-off voltage and then fully charge it without interruption.
8.5. Inconsistent String Number
- Check whether the "unit quantity" in the parameter setting is correctly configured in the APP.
- If there is no voltage in two or more strings in the middle of the pack, check if the acquisition cable has fallen off or is improperly connected.

9. User Tips
- Always double-check all wiring connections before powering on to prevent damage.
- For optimal performance and accurate readings, perform voltage and current calibration in the APP after initial setup.
- If you experience inaccurate capacity readings, a full discharge and uninterrupted charge cycle can help calibrate the BMS.
- In cold climates, consider utilizing the optional heating function to maintain battery performance and extend its lifespan.
10. Maintenance
- Regularly inspect all wiring and connections for any signs of wear, corrosion, or looseness.
- Keep the BMS unit clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Ensure the operating environment is within the specified temperature range (-30°C to 70°C).
- Periodically check the battery status and parameters via the mobile APP to monitor the health of your battery pack.
11. Warranty and Support
The JIKONG Smart BMS is certified with CE, FCC, and RoHS, ensuring compliance with international quality and safety standards.

For further technical assistance, detailed guides, or specific communication protocols, please refer to the comprehensive PDF manual available at: JIKONG BMS User Manual (PDF).
You can also find additional resources and protocol information at:
- Instructions: https://github.com/JIKBMS/files/tree/main
- BMS protocol: https://github.com/syssi/esphome-jk-bms